Jump to content

Recommended Posts

Mailed my detector to California today. Going to find out why it won’t turn off at times or won’t turn on at times outdoors in 80+ degrees. Indoors 70 degrees works like it should. I will post the results.

  • Like 4
  • Oh my! 1
Link to post
Share on other sites

8 hours ago, Tnsharpshooter said:

Curious, was box damaged?

The box was crushed according to Dimitar. Not the first shipment he has received damaged either.

 

8 hours ago, Tnsharpshooter said:

Curious, was box damaged?

 

 

  • Sad 1
Link to post
Share on other sites
8 hours ago, midalake said:

Looks like the non-waterproof version.  USPS is a train wreck. We know who to thank. 

They are all waterproof I only covered the speaker as a precaution. This unit is over two years old so at first I was leary of the speaker as many Nox detectors at the time were flooding and some thru the speaker. This machine was always water tight though. Not so much now. 

  • Sad 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Kaolin washer
      Can someone ex plane to me what this is, and how to work it , I think i am missing something
    • By JimT
      I have a Tarsacci on the way, should be here by mid week.  Reading some of the posts 18 KHz hasn’t been as productive hitting silver in some of the posts I have read.  

      I will be hunting pasture, old camp sites and old house sites.  There will be iron and sometimes lots of it.  Hunting for Buttons, bullets and other relics would you use 6 kHz 9 kHz 12 kHz or back to the 18 kHz.  Silver of course would be a high conductor, I would think brass and lead might fall into the mid range conductors.  

      if anyone would share their experience with me I would appreciate it. .  
    • By Carolina
      Once again today my Tarsacci would not turn off. You could feel the tactile switch clicking but no effect. I finally removed the battery cap and turned it off. I reinstalled the battery cap and could hear static in my phones as the cap negative made contact but a blank screen. I pushed and pushed and pushed the on switch to no avail. After removing the battery cap several more times each time reapplying I could hear the static in the phones but no screen. Finally upon installing the cap it came to life. I did notice that the salt balance was not acting as normal also in all frequencies. Keep in mind I have used this machine regularly for two years so I know it fairly well. This only started when I installed the new 12” coil. That is the only difference. I will put the stock coil back on and give it a go.
    • By JimT
      I have been detecting for about 30 years I have used a lot of brands and machines.  I was out of detecting for about 5 years due to an injury but recently purchased a Nox 800.  
       
      While looking for videos on the Nox I came across a video of this machine.  The videos are impressive.  So now my research begins in this machine and would appreciate any input from the folks here.  
       
      I live in Arkansas (Ozarks) and basically hunt for civil war relics in pasture and old house sites.  In my mind I thought the stock coil would be the way to go but some are talking about how well the Beast separates in Iron. 
       
      just asking for honest feedback you do not have a claim jumper in me.  

    • By Kaolin washer
      Just got the TARsacci, and am new to it . so I was out at the park and kept getting signals that after digging the plug i got no sound. so I thought G WIZZ could anything be that deep ? so i dug down and down and finnaly the pinpointer started to beep. and i figured it must be a big iron .  but low and behold at a full 14" up comes a brass lamp part. and get this i did not have the detector maxed out  i was in 6.5khz black sand on and salinity on at 37 and a gain of 5 and threshold of 2.  Also it can agnor some kinda beefy foils and not only ignore them on the suface, ( I dug no small foils)  but you can whack a penny derectly under the foil and no masking like 7" under the foil I did the testing . no VLF I know will do that . I will be selling my TDI soon  the Tarsacci not only ignors the small foils but can hit silver and Gold under the foil

    • By Dug2gld
      The 12 inch coil is awesome in the iron. Still no silver. But I just haven’t gotten over top of it yet.  That small flat button was at least 12 inches down and next to iron! 




×
×
  • Create New...