Jump to content

Recommended Posts

Got a package from @steveg today,  I am proud to be the first to buy one of his "Woodland Camo" shafts and a counterweight setup. Version 2 of my Equinox was a DetectEd Redbelly shaft and cuff:20210128_113600.thumb.jpg.11a383da32135ca12a4e82b5ab8886f2.jpg

The Redbelly is great, I've used it everywhere.  Light, locks up nicely. I have no problem with it. 

Steve posted his new selection and I just had to have one. It's a bit more rigid than the DetectEd shaft, possibly because of the Realtree wrap. It might be a bit heavier but I haven't noticed it. The heavy clear coat makes it really shiny. I also bought the 7" counterweight with enough bags for a 15" coil, it's black carbon fiber but looks good.  Right now I don't need it but it's good to have it if I do.

Here's the new setup:


I'm keeping the DetectEd cuff as it has no guide pin so I can put it wherever I want. I have a neoprene cushion on it. 


Also managed to snag a Detecting Innovations sticker to match.  Perfect! 😎 Thanks to Steve for this awesome high quality offering. 

"There are many like it but this one is mine". 🇺🇸

  • Like 8
Link to post
Share on other sites


  • Like 2
Link to post
Share on other sites

     Don't lean it against a tree or bush, you may never find it again! GPS tag optional! 🤣👍👍

  • Haha 2
Link to post
Share on other sites

It really fits in here,  a lot of people wear Camo of some sort all year. Wanted to do something unique.  Since I got back from the RV trip it's been either too hot or rainy, right now we have 12"/hour thunderstorms sitting over us after a 3 week drought. 

At least the ground won't be concrete anymore.  😀

  • Like 1
Link to post
Share on other sites

    We don't have the concrete ground, but more like dirty carbon powder! Near zero conductivity without some mosture, if you know what I mean! But the beach soil is relatively consistant, albeit like walking on hot coals!🥵👍👍

  • Sad 1
Link to post
Share on other sites

   And I've come to the conclusion, after many years of hunting, in an extensive camo collection, that the deer are laughing at me trying to blend in! At least the smart ones! 🤣👍👍

  • Haha 3
Link to post
Share on other sites

I wear camo about every day. Why?  I wore it for 22 plus years in military.  Old habit hard to break.  

When folks catch me not wearing camo.  They say boy you look different all dressed up.  Lol

Even wearing blue Jeans they think I am all dressed up.   When they catch me in a suit, they about faint.

  • Like 1
  • Haha 3
Link to post
Share on other sites
10 hours ago, Tnsharpshooter said:

I wear camo about every day. Why?  I wore it for 22 plus years in military.  Old habit hard to break.  

When folks catch me not wearing camo.  They say boy you look different all dressed up.  Lol

Even wearing blue Jeans they think I am all dressed.  When they catch me in a suit, they about faint.

I wore it for 10 myself. Now that I'm retired I wear it a lot more. Here lots of us wore/wear it to work. 

Link to post
Share on other sites

F350 --

THANKS for the very kind words, and for the great picture.  I think it looks great (but, I'm probably biased, LOL)!  THANKS for your business, and for being "the first one!"

Thank you!


  • Like 1
  • Thanks 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By mn90403
      I have an 800 that I use at the beach.  Sometimes it drops and this causes the plastic stand to break.  I glue it but it has happened about 3 times and soon I won't be able to glue it.
      It is time to get a new cuff/stand.  I'm really not interested in new shafts but ...
      I use the 15" more than any coil if that makes a difference.
    • By Joe Beechnut OBN
      Hopefully this Fix will allow me non-delayed hunting. Not beautiful,... but functions. 
      Took out the bottom pin on the shaft leaving the top, seems to be the weak link area. Cut a 5.5 inch (14cm) piece of 25 x 23mm Carbon fiber, slid it over the weak area with about a 2mm space between the shaft and the carbon fiber..... Cut slots on both sides so the CF tube goes all the way to the bottom. Sealed the bottom of the CF tube, and poured a 2 part 24 hour dry epoxy into the void. Let that dry for a few hours then started pouring the epoxy down the top of the shaft to fill the hollow area in the lower clevis insert. I'm sure i added some weight with all of the epoxy added but maybe a good thing. Hope to find out this week, planning my first (real hunt) Thursday with the AQ since my accident in Jan..., 
      Interesting, I am sure the slow dry epoxy filled in the area where I took the lower pin out. I had filled the void and did not give it much time to dry when I started to fill the main shaft with epoxy.. I soon noticed it was forcing out the epoxy in the void so I stopped and gave it enough time to firm up, then continue. I'm not sure where the inter was leaking thru to the outer. Unless it was coming out the pin holes where I pulled both earlier. I never pulled the clevis joint to see if it was solid, but it is now.


    • By palzynski
      The Apex balance/weight is very good but as I thought it could still be improved , I decided to update it a little bit ... 🙂
      My modifs :
      1)  polymer lower shaft replaced by an home made carbon shaft :       30g saved
      2) aluminium mid shaft replaced by an home made carbon shaft :       40g saved 
      3) rubber handle replaced by a lighter foam handle :                             30g saved
      4) armrest replaced by a lighter and wider ML Vanquish armrest         50g saved
      note : I have kept the original aluminium S shaped upper shaft , just the lower and mid shafts have been replaced by carbon shafts
      Total : 150g saved 
      After these modifs my Apex/Ripper only weights 960g /2.1 lbs  👍!  
      ( vs 1110g/ 2.4lbs for the original Apex/Ripper ) 
      I spent a little time doing this but it was worth the effort  ,  very few detectors weigh under 1kg , and now my Apex balance is almost the same as a Deus/Orx and it is very fun to use in the field ... 🙂

    • By Airtemisa
      Hi, does anyone tried this config for diving with the Nox?
      Is just the original stem only with the lower part of the rod. Is a little bit long, but I think it should work! 

    • By NCtoad
      I have one of the first runs of the equinox.  Got on a wait list with a dealer and got mine in April or May of 2018 (please correct me if I’m wrong on this, but I think I’ve had my nox for 3 years now).  I had a slight case of the shaft wobble issue and ended up getting an Anderson carbon fiber upper and lower rods.  When Steve first came out with his rods I inquired about getting just the upper from him mostly for the cam lock, but also for the balance pod.  We sent some messages back and forth and realized that the Anderson lower rod was a slightly larger diameter and wasn’t compatible with Steve’s upper rod.  Since I had just shelled out $150 on the Anderson I decided I would make my own balance pod.  I had some 6/6 nylon rod and had this big piece of aluminum left over from another project.  You can see from the pic how it works.  The aluminum counter weight can be slid closer or farther from the fulcrum point (the equinox control box grip) to fine tune the balance.  I forget what the nylon rod and counter weight weighs, but even with the counter weight slid all the way to the end, it still doesn’t perfectly balance the 11” coil, however it’s nearly perfect for the 6” coil.  I wanted the overall weight of the detector as light as possible, but still help significantly with the balance.  I think I got it at a fairly sweet spot between balance and overall weight.  

    • By Rick N. MI
      I got the rod from Bulgaria.

  • Create New...