Jump to content

Best Detector For Up To 6in And Not Very Small Nuggets


Recommended Posts

I already have a V440, GF 66 and a GM1000. I am getting too old to be digging all day and would rather walk in preference to digging. Thus I prefer sites where it is lesser known so it has not been worked to death. I don't dig beyond 6in and work on the principle that the old timers the old have missed the eluvial and alluvial that was lying just below the surface. Also the fact that not many have hunted there. Anyway that's my rationale for gentlemenly prospecting. After waffled on above what are your thoughts on the best detector that will find gold larger than 1 gm down to 6ins ie not interested in the tiny pieces .Also can find coins etc if possible. I am not interested in 2300,7000 etc as they are well outside my price range. If you have any suggestions I would appreciate it thanks.

  • Like 1
Link to comment
Share on other sites


Of the three detectors you have, Queensland............Gold Monster 1000. Even better for hotter ground would be an Equinox 800. Forget the GoFind. Vanquish 440 is an excellent detector for everything but gold prospecting. Plus, you may have trouble getting the Vanquish to be quiet on hot ground due to the internal ground balance limitations that can make it sound like the ground is full of iron with ghost -8 and -9 signals.

The Gold Monster and Equinox 800 could easily hit 4" .25 gram and bigger nuggets in the really bad ground I sometimes detect in. The target response is often an iron response instead of gold in bad mineralization.........but I just dig it anyway.

  • Like 7
Link to comment
Share on other sites

This is a bit of advice others with more experience with the CTX may want to chime in on, however I think the CTX 3030 might be right up your alley.  Your aim is 1 gram gold or larger, quite shallow under 6" and avoiding digging tiny stuff and may as well throw some discrimination into the mix as well to make it even easier for you.   I took this photo before I bought the little 6" coil or else it'd be in it too.

2002630318_MYCTX.thumb.jpg.d9c832c81bae85ac459fd14ab0271f28.jpg

It's not like the GM1000 where it's sensitive to the very tiny targets, it's not going to drive you nuts with small shotgun pellets and so on like the normal prospecting detector but gram size gold is absolutely no issue for it.  It appears it handles bad soil very well, others may want to comment there as I can't personally verify that, just by what I've read.

I'm new to the CTX myself although I love it so far, I have messed around with it a lot already and it has a feature that allows you to limit it's depth in a way, it's called volume gain, you can basically make it barely detect deeper targets by turning the volume gain down, deeper targets will just become a break in the threshold and targets at the depth you're after will scream out.  I guess you'd just bury a 1 gram bit of gold at various depths and adjust the setting to suit what you wanted to dig and how deep.

Here is a Minelab Treasuretalk on the feature that you may want to read.

https://www.minelab.com/go-minelabbing/treasure-talk/ups-downs-of-volume-gain

It's also quite a reasonable prospecting detector for the size gold you're chasing.  It has options of 6", 11" and 17x13" coils from Minelab and Coiltek have had a 10x5" for it.  I'm not sure if it still exists as I've been unable to find one to buy so far so maybe they've discontinued the coil.

Here is some talk on it being used in OZ by Gold Hound that found a great use for it for his prospecting.  He has a bunch of settings you can download for it available on this site to suit various conditions in OZ too.

It's also Minelab's flagship coin detector, although with the Equinox now on the market some might say that's debatable.  Either way you'll find it excellent for your coin hunts and again, it has the settings you desire to suit your detecting style and really great accurate target ID's to assist you digging less junk and more good targets you are aiming for.

It's also getting long in the tooth but still a current model and you should be able to pick up a second hand one reasonably easily with some CTX users switching to the Equinox which has small gold performance more on par with your GM1000 and will have you digging crazy amounts of shotgun pellets 🙂

A potential downside is you may find it a bit heavy as it's about 2.3kg, compared to say your GM1000 at about 1.33kg with the 10x5" coil.

Obviously don't jump in and buy one without doing some research and others may chime in if my assumption it maybe suitable for you is correct, but it sure sounds like it suits what you're chasing.

  • Like 4
Link to comment
Share on other sites

The OP already said he has budget limitations. I would just put the larger coil on the Gold Monster and run it in Deep Auto 1. If he digs too much small stuff turn it way down to 4 sensitivity or less or use the shallower discrimination mode. 

  • Like 1
Link to comment
Share on other sites

You can pick them up second hand not much more than he paid for his Monster though

https://www.gumtree.com.au/s-ad/mareeba/miscellaneous-goods/minelab-ctx-3030-metal-detector/1273927400

$1600 AUD.

His aims to not dig stuff much under 1 gram so that's a challenge with the Monster, even on lowest sensitivity it's going to ping on surface pellets.

If his Vanquish had ground balance it'd be the cheapest option, but being in OZ and looking for gold it's not likely to cut it without being able to balance.

  • Like 3
Link to comment
Share on other sites

Posted (edited)

I am in a reasonable mineralised soil. And testing the GM1000 set at manual 6 it could not find 2 $1 Oz coins at 8in and 6in  which has a diameter of 1in but could find 5c coins ,diameter 20mm, at 2in and 4inHow does this translate. 

Edited by Lachie
New info
Link to comment
Share on other sites

2 hours ago, Lachie said:

I already have a V440, GF 66 and a GM1000. I am getting too old to be digging all day and would rather walk in preference to digging. Thus I prefer sites where it is lesser known so it has not been worked to death. 

If you have any suggestions I would appreciate it thanks.

I take it that you are new to the game, joined June this year. My advice is to get to know what you have. Most old VLF detector have capabilities to pick up 1 gm 3 inches and 20 year old PI detectors can pick up .2 or .3 gm nuggets close to 6" in most goldfields by a well set detector and proper use (meaning not many 1 gm nuggets left by them). If you like walking get away from locations close to towns (less junk and shotgun pellets ) and do the fringes of the workings. When you have got close to a magic ounce the price of an upgrade is not a handicap together with the experience gained.  

  • Like 6
Link to comment
Share on other sites

Hey Lechie,

   Welcome to the forum! Please introduce yourself in the Meet And Greet section, and give us some background!👍👍

Link to comment
Share on other sites

Everyone would like bigger shallow gold.  Problem is everyone else has most likely found it before you. Your Monster is a very capable machine, learn it well.  Take what the ground gives, big or small, and be happy the ground is giving anything even if small......jmo

  • Like 6
Link to comment
Share on other sites

1 hour ago, oneguy said:

Everyone would like bigger shallow gold.  Problem is everyone else has most likely found it before you. Your Monster is a very capable machine, learn it well.  Take what the ground gives, big or small, and be happy the ground is giving anything even if small......jmo

Very wise oneguy.  Sometimes I have to decide.......do I want to spend $30 to $60 on gas, find $10 or less in gold (there is always the possibility of a bigger find of course or getting skunked) or do I want to spend 50 cents on gas or walk to a local park, find $2.00 in change, some .925 silver jewelry (and maybe some gold jewelry once a month or so....) and come home with $10 in change and melt value silver like I did today for just the expense of walking the dog and digging 50 targets in 1.5 hours. That is a tough choice for me sometimes. 

So, welcome to the forum Lachie.  you have an excellent coin and jewelry detector in the form of your Vanquish 440 and you have one of the best shallow gold detectors for the first 6" of ground in the world in the Gold Monster 1000. If you sold both and picked up an Equinox 600 or 800 it would be an excellent replacement for your 440 and GM1000 and could handle everything they can do in just one detector. But really....you already have your needs covered in my opinion, especially if you are fairly new to gold prospecting and coin/jewerly hunting.

  • Like 6
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By NV-OR-ID-CAL-AU
      Hello all,
      My name is Ron and I'm new to the forum and have been learning a lot from it's members and really appreciate all the time everyone puts into this forum, some really great information comes from this forum.
      I'm in the market for an upgrade from my current detectors and am trying to decide on which would be the best detector for the worst case scenario as I have currently been detecting in the Siskiyou's serpentine gold belt (pretty much to hot for VLF's) and this gold belt also contains a very large amount of trash. The Equinox 800, Gold Bug 2, Garrett AT Gold have not been able to handle the mineralization of this ground very well. I have not tried any other VLF’s here though.
      I usually rely on my Minelab Pulse Induction unit in this ground and use the iron disc. to save probably 75% of my time from digging unnecessary holes. I'm still interested in owing a top of the line VLF due to I detect mine dumps in the backcountry of Idaho, Nevada, and eastern Oregon where the trash is less abundant and the ground is not so mineralized even though it is usually steep and rugged (great VLF areas). 
      After reading several posts on this forum I have narrowed my research of VLF metal detectors to the Equinox 800, Gold Monster, X-tera 705 Gold Pack, Nokta/Makro Gold Kruzer or AU Gold Finder, White's 24K or MXT, or a second back-up Gold Bug 2. I am really looking for the machine that can handle the hottest ground and has the sharpest sound on small and deep gold. Although no detector is a do it all machine I'm hoping the one that can handle the hot ground the best should be able to excel with better iron/disc. and target separation regardless of it being a multi-purpose detector or gold only detector, my assumption only. Does the frequency of detectors change their ability to handle hot ground like Australia. Has anyone tried these detectors in highly minenalized ground with any good results?
      For Pulse Induction I'm narrowing my research to the GPX 6000 and/or GPZ 7000 both non disc. units for a great option for Idaho, eastern Oregon, and Nevada were there is less lead and iron trash present. For these Siskiyou's trash sites I'm looking at the GP/GPX series with iron/disc. Garrett ATX, Fisher Impulse Gold (has anyone been able to separate out lead and iron trash with the Fisher limited AQ  Impulse version and still find small and deep gold)? Has anyone got a good grasp on these machines being affective  in iron and lead infested areas?
      Thank You for your time.
      Ron
    • By Tony66
      I'm starting up detecting again so I'm looking for opinions on a new machine. Money is an issue, but I know a descent machine will cost a little bit. So far I'm leaning towards a Fisher F22 or one of the Garret models. By all means, give me opinions on not just those mentioned, but any that would be good for someone not too far above beginner (have to learn everything again).
    • By Joe D.
      Hello all,
         I recently saw someone state that they didn't fully understand why they sometimes get the urge to buy a certain detector! And for one reason or another, fail to pull the trigger, or asking the question of why not!
         I, like many here, have questioned why i would want to purchase; and have purchased, what would "technically" be an "inferior" detector! If there is such a thing; they all find stuff!!
         I think the reason's are as numerous as one can imagine! So i won't bore everyone with what i think their reasons are! I can only speak for myself!
         Probably my number one driving factor are places like this forum, and other sources for research! Once you really start to get the "bug" for detecting, you begin to understand that it can go beyond just finding treasures! In fact, my reading, and quest for information, far exceeds my actual detecting hours! Of course, there are also "real life" reasons that prevent me from getting out there as often as i would like! But instead of that being a negative; and me being bitter about it! I funnel that energy into trying to soak up more knowledge to make my actual detecting hours more productive! Many here will understand this!
         So, for those thay are unclear what that has to do with buying older, or less advanced detectors, i will explain!
         Like many, i detected a few years when i was young! Stopped for a career, and family; among other reasons! And got back to it, a few years before my retirement five years ago! Not being involved for all those years, i went with a new detector; among others i researched at the time!
         Now fast forward to today! I'm much more knowledgeable than seven years ago; detecting and theory wise, but have barely scratched the surface! I own several detectors for various functions! Some overlapping each other a bit in operation! A few others are just for fun, or for something i feel i missed, in my absent years! Other's were too good a deal to pass up! And I could get a good return for, if i chose to!
         So, to summarize! In my opinion, the longer your in it, the wider range of technology, legends, varations, etc... you are likely to buy, and try, for no very practical reason! Cost not withstanding; as you advance in this hobby! Or as some jokingly refer to it as a "sickness ", or "obsession "! 🤩 👍👍
    • By GoldenHillbilly
      I'm looking to buy my first detector this year, specifically for nugget hunting. After lots of research I'm leaning towards the SDC 2300, but wanted to see if you have other suggestions based on my terrain/conditions. We don't have much public land for detecting because the national forests and state parks don't allow it. But I have access to a private 10 acre property with a creek flowing through it. There was allegedly an old gold mine that was buried decades ago in a neighbouring property, so hopefully it is a good place to work. The ground is covered in lots of organic matter sitting on top of soil heavy in granite and red clay. The creek contains a wide variety of minerals specimens and a good amount of magnetite. So it looks like I'll need to focus on PI machines. Here are my main questions.
      Will my time be better spent in the creek where the gravels and rocks are exposed, or should I also focus efforts in the higher areas covered in humus?
      Should I wait for the Fisher Impulse Gold to come out (and prove itself with users) before dropping a few grand on older technology?
      Does anyone recommend the Garret ATX or any other detector over the SDC 2300 for the area and conditions I'm dealing with?
    • By JesseAllen2
      Hello everyone!
      My name is Jesse, and I dig trash on the beaches of Santa Cruz, California with my White's TDI BeachHunter. Tent Stakes, Bottle caps, clad, you name it. Occasional gold (around an ounce in the last year), but wayyyyy too much garbage for the time spent out there. No, more like the right amount of garbage dug on a trashy beach with a PI with no discrimination settings LOL.
      I love this machine. It's stable, reliable, punches very deep, and was a great first "real" detector. The  weight sucks (though it can be hip mounted, but I found myself getting tangled in the wired in that configuration), and the shaft sucks too.
      I have saved some money, and am planning to shoot for the moon. I want the best beach detector out there, VLF, PI, or otherwise, that will help me dig 99% less garbage, and still punch deep and be fun to swing.
      So far, considering a CTX 3030 or Equinox 800. Big coil for either.
      Reading the forum for a few months, following developments, it seems that the metal detector market moves about as slowly as the "games in development" market. I may be outing myself as a Zoomer here but waiting for these new machines really brings me back to waiting for games to go from beta to 1.0. Anyways I'll be in possession of my next detector for the foreseeable future, and am having a hard time deciding what choice to make.
      Do I get the 9 year old, 50 lb dinosaur with *slightly better VDI depth on higher conductors that costs almost double what a proper Nox setup would cost (with accessories), or do I get the Nox? Which feels just past its prime, with direct replacements probably coming out soon?
      Do I wait for these detectors that exist only in the imagination? The new fisher PI, possible CTX replacement?
      I have a nice pile of coin after selling some finds and other detectors and would really like to make this purchase count, any input is appreciated!:)
      -TENT SPIKE DIGGER
    • By Dan(NM)
      I'm looking to get a dedicated machine just for hunting gold chains and earrings on some fresh water beach sites while the lake level is down drastically. I'm thinking maybe a Gold monster 1000 or perhaps a GB2.  I like the idea of having 2 coils with the Minelab and the Auto ground balance, any suggestions????
×
×
  • Create New...