Jump to content

Tarsacci Returns


Recommended Posts

Cliff what headphones were you using?  I’ve never used the ones that came with my machine.  Got Tony to do a pair right away I’ve never heard music…. Well unless you count GOLD lol. Most of my hunting thou is in the water.

Link to comment
Share on other sites


14 hours ago, dewcon4414 said:

Cliff what headphones were you using?  I’ve never used the ones that came with my machine.  Got Tony to do a pair right away I’ve never heard music…. Well unless you count GOLD lol. Most of my hunting thou is in the water.

Not sure, may have been one of Harold's prior to getting my Eisenhower phones.... over two years ago and you want me to remember the phones I used...... Ha Ha.... I'm lucky I can remember any minor details anymore. I forgot about the music I had heard until it was posted which jarred my brain cells.... Changing the phones could be the reason since it hasn't happened again.... I just can't be sure.

Cliff

  • Like 1
Link to comment
Share on other sites

21 hours ago, Carolina said:

Your coil is a antenna. Working near a transmission tower would explain the music. Sounds like replacing the touch pad cured your problem for the powering off. I was a electrical contractor for 20+ years and had several issues with electronic breakers due to radio waves. Maybe that is your reset issue. Try another location well away from the transmission tower. Good luck to you.

Hi Carolina 

The reset issue on the tarsacci happened twice at a old settlement and a few times  at the dried up river.   Both these areas are away from a transmission tower.  At the dry river the tarsacci seemed to reset when I’m around large pieces of metal junk you could hear it cut off and at the old settlement  there was no large metal machine just reset itself twice in one day.  Wasn’t detecting in hot weather either. It doesn’t happen often but if it gets worse I’ll send it in to Dimitar.  He’s not far from where I live. The not being able to power off was more an issue for me but that has been corrected.
 

denny

Link to comment
Share on other sites

6 hours ago, cdv said:

Not sure, may have been one of Harold's prior to getting my Eisenhower phones.... over two years ago and you want me to remember the phones I used...... Ha Ha.... I'm lucky I can remember any minor details anymore. I forgot about the music I had heard until it was posted which jarred my brain cells.... Changing the phones could be the reason since it hasn't happened again.... I just can't be sure.

Cliff

I’ve tried a pair of lightweight headphones that wrap around the back of your neck and still had music coming from the transmission tower.  I don’t think it’s the headphones.  I’ve asked my buddy Paul to try his tarsacci at this park but has been busy.  
 

denny

Link to comment
Share on other sites

3 hours ago, Denny said:

I’ve tried a pair of lightweight headphones that wrap around the back of your neck and still had music coming from the transmission tower.  I don’t think it’s the headphones.  I’ve asked my buddy Paul to try his tarsacci at this park but has been busy.  
 

denny

Are you using the 12” coil? If so try the stock coil. In the same manner you receive EMI from hi tension lines, the coil (Antenna) is receiving the transmission towers signal.  On your other issue, I am not sure what you mean by resets itself. 

Link to comment
Share on other sites

On 7/11/2021 at 4:39 PM, Carolina said:

Are you using the 12” coil? If so try the stock coil. In the same manner you receive EMI from hi tension lines, the coil (Antenna) is receiving the transmission towers signal.  On your other issue, I am not sure what you mean by resets itself. 

I was using stock coil.  
The machine will power off then back on while in use.   Doesn’t happen often.

Link to comment
Share on other sites

Mine reset..... check to ensure you coil is completely tight.  Mine wasnt.  Cliff tell me about it.... in the process of moving....with two house holds of furniture, buy and selling, staging..... i cant remember what i had for lunch.   Also.... you maybe doing more water hunting.... meaning your coils in the water.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Kaolin washer
      i found a bunch of Gold ring s white gold , yellow gold ,small and large, from 12k to 14 k on the tarsacci i got a lot of bouncing around on the numbers in 6.5khz and almost non at 18khz most of the rings come in at 04--05-06-07-08 anyone noticed that as well ?
    • By JCR
      I finally had a chance to get out with the MDT 8000 again this afternoon. I hunted a different area that is not so heavily iron littered. This was my first chance to run Mixed mode for any length of time. It is much more dynamic & telling than straight Disc mode. I was able to call the big iron & small trash just fine. Dug some nice period targets including an unusual Flat button in very good condition. It is classed as a Patriotic/Political button in Albert's book; PC106A. A pretty neat find for around here.
      Still learning the MDT & playing with Ground balance & Salt balance. Today was 12kHz,  Sens 6-7, TH -3, Disc +30. Not clean ground by any means but only 1-2 nails per sweep instead of a half dozen. This is sticky Red clay with plenty of natural Iron oxide, GB in the high 800's to mid 900's.
    • By Dug2gld
      Again the tarsacci finds the deep brass today in a colonial site. Love the machine.  Old stuff including a thimble at about 15 inches down.  Having an issue with the pinpoint button sticking though. Anyone else have this issue??  
    • By Kaolin washer
      I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30  so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are .  6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43,  and this machine just starts devouring the ground ,  I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen.   the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working

    • By Dug2gld
      What settings does everyone else use under the big electrical wires.  The tarsacci wasn’t bad with interference as the deus was in the same area.  But I put the black sand on to get it to quiet down some. Would I be missing targets with these settings? 


    • By Kaolin washer
      Got back to the old homestead i have been hunting, and by far the thing i find the most of is shot gun shells, in fact i found a cash of of them buried about 9" deep , I think a red squirrel buried them  must have been 15 of them , but today I went over the same spot the ORX went over and just kept finding targets, . I keep digging some nails, because i find so few good targets like silver coins i really do not know the difference from a nail false, and a silver coin so i have dug my share of rug pullers,  but the Indian did have a better sound and higher numbers 14-17 and i found it by rechecking a hole the ORX found one in  I am using 6.5 khz and 7 gain and 0 threshold and it will hit with a good signal in air a dime at 11 inches so its got some power . the Indian looks like someone went after it with a sharp punch of some kind, otherwise it was in extra fine condition





×
×
  • Create New...