Jump to content

Impulse AQ Final Edition Release Date?


Recommended Posts

Hi guys!

I watched the treasuretalk on youtube for couple of days ago and Myer's metal detecting confirmed he is going to bring in AQ final edition in the shop next month in july! just wanted to ask others if it is true and anybody heared anything about it,Thanks!

  • Like 2
Link to comment
Share on other sites


 

On which video was it and at what part is it mentioned?

Edit - Found it. The video is "an evening with joe beachnut!!" and the AQ is mentioned at 11:20.

It will be interesting to see if what Russ told Jeff is true. What does Jeff mean when he says that when he gets his AQ he'll be giving people the mumbles?

 

 

Link to comment
Share on other sites

AQ...I know it is close... everything has been silent of late other then what Phil , owner of Myers, said the other night.

When Jeff mentioned the mumbles, that is a Virginia Beach, Grave digger max "Phrase", He uses it a lot when he comes off the beach ... Mumbling to himself about,... not finding gold.

Max, named Kenny (Corrected Denny), the Mumbles Man, for Denny found so many gold chains a few years ago.. He gives everyone else the mumble because they can't find any... I guess you might say, "Mumbles" is Virginia Beach Pirate talk.. And these are from Max's youtube video's, which he no longer does many on beach hunting.

  • Like 4
  • Thanks 2
Link to comment
Share on other sites

11 hours ago, Joe Beechnut OBN said:

AQ...I know it is close... everything has been silent of late other then what Phil , owner of Myers, said the other night.

When Jeff mentioned the mumbles, that is a Virginia Beach, Grave digger max "Phrase", He uses it a lot when he comes off the beach ... Mumbling to himself about,... not finding gold.

Max, named Kenny, the Mumbles Man, for Kenny found so many gold chains a few years ago.. He gives everyone else the mumble because they can't find any... I guess you might say, "Mumbles" is Virginia Beach Pirate talk.. And these are from Max's youtube video's, which he no longer does many on beach hunting.

I think you have a typo here. It is Denny not Kenny. Denny is the mumbles man.

His real name is Dennis  Maynard. 

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

Anybody knows or heard anything about the release of final edition? Myers metal detecting should have the unit in the store by now or?

Link to comment
Share on other sites

I wonder if anyone at the event will ask Russ when the new AQ will be available.  🙂

 

 

Link to comment
Share on other sites

I hope to see Aqua in Spain one day.  Let's see if some French testers spend the summer in southern Spain 😁

  • Like 1
Link to comment
Share on other sites

10 hours ago, Luis said:

I hope to see Aqua in Spain one day.  Let's see if some French testers spend the summer in southern Spain 😁

I hope to see one in Sweden one day to buy!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By The_Stalker
      Received my catalog from Kellyco today and they proudly announced that they are looking forward to offering the Fisher Impulse AQ in 2022.  The write up that Kellyco gave made it sound like there was substantial discrimination with minimal loss of detection depth with the AQ.  We shall see.
       
       
    • By Luis
      We have been told on several occasions that it was impossible to export the Aqua limited outside of the United States and now on the official page of Fisher I find this publication.  How is this possible?
       
    • By tvr
      Was in Myrtle Beach for most of a week. Got the AQ well into the chop on this trip. I stayed in cuts between sand bars and the beach so the waves were not terrible and I was able to stay on my feet. Ran all metal all the time. It ran mostly quiet with ATS on 7, Sensitivity on 4, delay on 10. If I ran delay less than 10, each step lower got a good bit more noisy. ATS lower than 7 did not make for good hunting either. Still left lots of adjustment should I venture beyond the sand bar. Had the big coil on, did not take the 8 inch on this trip. The waves did make for an effort controlling the coil, but made it through without mishap. Did not go out detecting on Thursday when Elsa went through. Elsa seemed to mostly push some sand up on the beach in the area we were staying; that made the bottoms of the cuts softer than they were early in the week. That said, On Friday in a soft bottomed cut, had a fairly faint but repeatable signal that after four scoops became very loud and I got it on the fifth scoop. Nice little 2.3 gram 14K gold pendant.  


    • By cudamark
      Sorry, I can't seem to find my previous thread on this subject. To recap, my AQ wouldn't power up, so, it was sent in to Fisher for repair. They claimed that it was the battery. I had my doubts, as I had tried a second battery with the same results. Anyway, they claimed it was only the battery and sent it back to me with a new one. On a side note, I had just sent the electronics back to them, and kept all the rods, cuff, and charger to save on shipping costs. Well, it seems they want EVERYTHING sent back when they do a repair. That's a first for me. They even told me that you shouldn't remove the arm cuff at all! It's something that they have to do, and not something the customer is capable of as it might damage the cable inside the rod.  Good grief, what a design. Anyway, when I got it back, I noticed that the cable from the battery to the pod had been changed. Hmmm, I wonder if that was really the problem and not the battery. Otherwise, why change it? Oh, you think they might have sent a new and improved one? Think again. I didn't think they could make that design any worse, but, they managed. It's even longer that the original, and wimpier IMO. And what is the problem with using 90 degree connectors to reduce the risk of cable damage? Well, it works now, so, I guess I can't complain too much, in fact, the new battery is a lot better than the original. The last hunt, I got over 3 1/2 hours on it and still had a green light! That's definitely an improvement. Now, if I can just find something good that my other detectors couldn't find!
    • By tvr
      Walked down to the local watering hole; brackish water bay tributary, pretty well cleared out over the years but a bit trashy with bits of iron. Ran delay 7, sensitivity 7, threshold 4, volume 8, ATS 6.5, reject 6; mostly all metal but some tones and mute to check targets.
      Initial reaction is that it is a little easier to hear the edge modulation with the 8 inch than with the big coil. I walked away from several targets that were very pronounced double tones then had a more subtle edge that I told myself to walk away … but dig to verify. That was the little fish hook. The odd shaped washer, to the right of the fish hook, fooled me; it sounded pretty good in all metal and in tones. The rest of it is all non-ferrous. Some of the small targets fell through the scoop several times before I finally capture them and got them in the pouch. This set up finds fairly small targets well. Tones seem to be more pronounced to me with this coil than with the big coil with some similar settings, yet I think I still hear iron better in all metal than in tones ... maybe some setting tweeks would change that around but I'm pretty happy in all metal.
      I did have an interference issue. A boat about 100 feet from me fired up and the AQ talked and talked. Stepped through the frequencies and no help there. I was shallow enough the detector head was above water so I went deep where the detector electronics were well under water and, surprise to me, that did not help either. Dropping the sensitivity down to 2 made it usable. Once he lowered the boat lift, backed off and motored away I could turn the sensitivity back up and hunt with a very quiet AQ.
      Did have a great blue heron land on the beach and walk into the water. Got about 30 feet away from me so I stayed still and watched it turn its head looking for minnows, catch and eat them. After a few minutes it walked around the beach corner towards the boat lift then flew about 2 hundred yards down the water.
      A good afternoon in the water.

    • By Mikeguard01
      Didn't get out this past week since I was under the weather.
      Started out with the detector being really unstable. Water got into the coil connector. Blew the water out of the connector and tightened the back-shell and everything was good to go. I also have noticed when I'm in shallow water she's a little noisy and a lot of falsing (water way below the connector). She's pretty stable when completely covered. I do run my machine hot in all metal.
      One old beach I hunt always has sand piled in to the one side. No sand movement in this area other than more accumulation. For years I said there has to be targets just out of detection range. Well not for the AQ. I did find a few targets in this area. I had to work slow since these targets were pretty close to the depth limit and I was running hot. A few pieces of crusty Silver and a nice 10K ring dated 1946.
      HH
      Mike





×
×
  • Create New...