Jump to content

Tarsacci Is A Monster


Recommended Posts

I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30  so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are .  6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43,  and this machine just starts devouring the ground ,  I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen.   the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working

20211011_134825.jpg

  • Like 2
Link to comment
Share on other sites


I have to agree about the tones, id like to have had those Nox tones on this machine.   The ping pongs are good for me coming out of AM to check a target.   We like it pretty simple in the water.  Expanding the digital range beyond 30 for dirt hunters might be an advantage as well .... but then he have to work on having more than one notch lol.   Its definitely a deep machine especially for harsh conditions.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Dug2gld
      What settings does everyone else use under the big electrical wires.  The tarsacci wasn’t bad with interference as the deus was in the same area.  But I put the black sand on to get it to quiet down some. Would I be missing targets with these settings? 


    • By Kaolin washer
      Got back to the old homestead i have been hunting, and by far the thing i find the most of is shot gun shells, in fact i found a cash of of them buried about 9" deep , I think a red squirrel buried them  must have been 15 of them , but today I went over the same spot the ORX went over and just kept finding targets, . I keep digging some nails, because i find so few good targets like silver coins i really do not know the difference from a nail false, and a silver coin so i have dug my share of rug pullers,  but the Indian did have a better sound and higher numbers 14-17 and i found it by rechecking a hole the ORX found one in  I am using 6.5 khz and 7 gain and 0 threshold and it will hit with a good signal in air a dime at 11 inches so its got some power . the Indian looks like someone went after it with a sharp punch of some kind, otherwise it was in extra fine condition





    • By Kaolin washer
      I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30  so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are .  6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43,  and this machine just starts devouring the ground ,  I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen.   the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working



    • By Kaolin washer
      What i have found out is the Tarsacci out performs my ORX in ground littered with trash, and in depth of detection, I buried a penny only 7 inches deep and the orx could not hit that penny ,du to small bits of iron and other metal in the ground , the Tarsacci pounded that penny, and i have done this test in two different spots, its noticeable very much so . and today i found a spoon at a solid 14 inches deep  . but i would say my ORX is better at i,d, on iron and bottle caps  also today i got a false on a 7" bread tie using the Tarsacci.  but over all the TAR has power and you know it and it delivers

    • By Ridge Runner
      I’ve been wanting to use the pig tail that comes with my Tarsacci but at the same time I wanted the new Sun Ray Pro Gold headphones to go with it. I just like being able to unplug from my Tarsacci anytime I want. The headphones have a universal plug that the 1/4” screws down over the 1/8” making it two plugs in one so to say. It also has a volume control for each ear that helps me a lot being the hearing in my right ear is not as good as the other.
      If you’re wondering why it’s called a pig tail because it’s short like one.

      One important thing you need to do is anchor the pig tail down to the shaft so not to be pulling directly on it . If you don’t it’s going to take a beating and not last long at all.
       You can see in the picture below how I fixed that .The last picture as you can see is with the headphones plugged in.
       Chuck 
      PS The headphones came from Rob’s detectors .
       


    • By Ridge Runner
      Over on the Tarsacci forum a lot of us have been expressing the need for a smaller coil.
       Some say they want a round coil of different sizes from 4” to 7” but I’m the one who’s throwing a pipe in the spokes. I’m wanting a elliptical coil say around a 10 X 5” that I think gives you more ground coverage on each swing.
       We’ve been told that the powers that be is thinking about coming out with one. That’s the rumor and right now that’s all it is .
       I just think any detector can’t show it’s full potential if held back because of lack of coils.
       Chuck 
×
×
  • Create New...