Jump to content

New Inexpensive Gear Belt With Pouches


Recommended Posts

18 hours ago, kac said:

the internal zipper does get stuck as I jammed it up with crud

On the first Garrett pouch I had (vinyl), the zipper also became unusable. I usually kept the internal pocket unzipped when I hunted. The second Garrett pouch, which I currently use (nylon webbing), has its zipper closed all the time. It still works great after years of using it. Keeping the zipper closed keeps the crud out of the teeth and prevents the little opening from getting snagged.

  • Like 2
Link to comment
Share on other sites


Y'all made me go buy another relic elite for back up. Best pouch made. Given 3  to buddies as gifts...they have one now that you can add your own belt.

Strick  

  • Haha 2
Link to comment
Share on other sites

28 minutes ago, strick said:

Y'all made me go buy another relic elite for back up. Best pouch made. Given 3  to buddies as gifts...they have one now that you can add your own belt.

Strick  

I really like that bag. It's a bit expensive but looks like it would hold up well. Many reviewers say the pinpointer loop swallows a Garrett Carrot, and again the belt is kinda thin. It also has bottom mesh. I think kac is onto something as far as improvements go.

On the one above the left bag fits my poly hand digger, the rubber frisbee and my cleaning brushes. The Doc's bag I use did too but they were tight the trash bag is large and draws tight. As for the belt, it is about twice as thick as the other bags mentioned, and can be used on it's own. I'm not happy with storing tools and trash together.

Link to comment
Share on other sites

The only tool I carry is my digger and there is a slot for it on the inside if you want to use that.....the carrot fits just fine it's not coming out of there and never has because it sits perfectly in my opinion. the mesh on the bottom is really strong..I usually just drop my leshe in there and was always worried that I would break it but never have. Have always had the ones with the belt built in so I'm gonna try this one and get a good battle belt for it. 

strick

  • Like 1
Link to comment
Share on other sites

17 minutes ago, strick said:

The only tool I carry is my digger and there is a slot for it on the inside if you want to use that.....the carrot fits just fine it's not coming out of there and never has because it sits perfectly in my opinion. the mesh on the bottom is really strong..I usually just drop my leshe in there and was always worried that I would break it but never have. Have always had the ones with the belt built in so I'm gonna try this one and get a good battle belt for it. 

strick

Try this one: it's rugged as heck and only costs around $25:

https://www.amazon.com/gp/aw/d/B08FF9N987

  • Like 1
Link to comment
Share on other sites

21 minutes ago, F350Platinum said:

Try this one: it's rugged as heck and only costs around $25:

https://www.amazon.com/gp/aw/d/B08FF9N987

Looks like you can stuff some shotgun shells around that one LOL, not sure if it would fly wearing it in a local park...

 

On another note, my customers can get custom bags made, wonder if we came up with a dream pouch with the features we want and I could see how much they would cost.

  • Like 1
Link to comment
Share on other sites

4 minutes ago, kac said:

Looks like you can stuff some shotgun shells around that one LOL, not sure if it would fly wearing it in a local park...

 

On another note, my customers can get custom bags made, wonder if we came up with a dream pouch with the features we want and I could see how much they would cost.

🤣 Yeah but here it's totally acceptable to wear camo and mil gear. Everyone hunts, and it's our daily uniform 😀 either hunter or boater. Never liked holsters much, I keep my .45 on a chest harness.

That would be a worthy thread to start. 👍 

  • Haha 1
Link to comment
Share on other sites

I had to switch from belt pouches because the always slide off of me. (Gluteus Minimus) So I went to an across the chest sling pouch. It works great in the parks for me and carries a suprizing amount of stuff.

 

ParkPack.jpg

  • Like 3
Link to comment
Share on other sites

GhostLight;  very nice rig. Looks like you are set up for precision recoveries. It is all much too clean though.

  • Haha 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Nokta Detectors
      Check out our new accessory packages! The accessory packages will provide you with all the necessary accessories that you can use with Nokta Makro detectors at unbeatable prices! Makes a great gift for the upcoming holiday season as well!   https://www.noktadetectors.com/accessory-packages/    


    • By GB_Amateur
      I picked this up on Ebay for my updcoming trip west:
       

      I like the lightweight, compact design.  The overall quality is quite good, with the aluminum parts appearing to be anodized.  Shown in the photo is the central magnet assembly removed from the hexagonal tube.  Here are a couple concerns I have:
      1) Particularly when installed, the effect of the magnets seems weak.  I think the ad says 13 1/2 lb pickup force (however that is measured) but given the distance of the magnets from the outside of the hex extrusion when fully installed, it doesn't seem to have much strength.
      2) The magnet frame assembly weighs almost half of the entire unit -- 408 g vs. 430 g for everything else.  That's not so bad, but for hiking and backpacking, every ounce saved helps.
      3) The magnet assembly (when installed) rotates 360 degrees without any stop/lock to hold it in a desired position.  My guess is that bumping either end on a rock or vegetation (think of the black plastic ends as knobs) could cause it to rotate to an undesirable position.
      The design is clever in that in order to clear the rake after filling with iron trash you just rotate the magnet assmbly until the fork tines push off the nails, wire, etc. -- a type of easy self-cleaning.  However, I might be willing to dispense with that feature to mod it for stronger pull.
      So here's some advice I'm seeking:  Do I replace these alnico magnetics with neodymium ones?  If so, how many and how strong?  Should I stay with the magnets on the inside or just attach them outside, and if the latter, where?
      I should have included a ruler for scale.  The width of the rake is 10.5 inches (267 mm) and the tines are 1 inch long and 7/8 inch separation.  Each hexagonal face is 3/4 inch across.
       
    • By TreasureHunter5
      Does anyone know a way to dip in grass without the grass dying. When digging in my yard, I try to not kill the grass. But the circle of grass in dig always turns brown/yellow. I was wondering if there was a way to prevent this, or is this something that just happens. Thanks!
    • By KellycoDetectors
      Picking the right sand scoop for your treasure hunting needs will help you recover targets more quickly with less effort, providing for a better hunt overall. With over 50 years of industry experience, Kellyco has tons of experience in helping our customers pick the right metal detectors and gear, such as sand scoops.
      What Are the Best Sand Scoops to Purchase?
      While it is impossible to say which scoop is the best for each individual treasure hunter to buy, it is possible to point to some of our best sellers and discuss them more in-depth. Continue reading for a detailed view of some of our most popular models of scoops on the market today.
      1. RTG 32″ Adjustable All-Aluminum Sand Scoop

      Reilly’s Treasured Gold, more commonly known as RTG, has been producing some of the highest-quality and most heavy-duty sand scoops on the market for years. They sell stainless steel scoops, aluminum sand scoops, and many other target recovery tools for beach metal detecting. For someone looking for the ideal sand scoop that will give them a variety of handle lengths, they should definitely look into the RTG 32″ Adjustable All-Aluminum Sand Scoop. This sand scoop gives you the opportunity to modify the length of the handle for whatever situation you run into, providing you with a highly-adaptable scoop that you can use rain or shine, on the beach or in the water.
      2. CKG 11″ x 8″ Sand Scoop

      CKG sand scoops are built to perform in any condition, as they are built with a lightweight stainless steel, providing the ultimate in ergonomics and durability. The CKG 11″ x 8″ Sand Scoop  features a top hole for a handle that you can install on your own. This allows you great flexibility in picking out the exact handle length and style you desire. If you would prefer a high-quality option that will last for decades, consider the CKG Universal Carbon Fiber Sand Scoop Shaft, as it will take a beating, while remaining lightweight and ergonomic.
      3. Detecting Adventures T-Rex 9.5″ Sand Scoop

      Detecting Adventures sand scoops are also built with the customer in mind. They are highly durable and will never give up on you, lasting decades with no problems at all. The Detecting Adventures T-Rex 9.5″ Sand Scoop is one of the most popular sand scoop solutions we offer.  The Detecting Adventures T-Rex scoop comes with no handle included, as it gives customers the option of choosing their own handle. It is constructed of tempered stainless steel, providing both incredible strength and corrosion resistance. If you are looking for one do-it-all sand scooping solution, this is it.
      Why Do I Need Sand Scoops for Metal Detecting?
      If you are frequently metal detecting on the beach, you might already know the answer to this, as you have recovered hundreds of pieces of jewelry, coins, and other buried treasure. Beach scoops are designed to quickly sift through sand to help metal detectorists locate their targets with ease. If you have ever tried sifting through the sand with your hands or a shovel, you know how inconvenient it can be, especially when it is a very small metal object, such as an earring or a coin. To many beach hunters, they would never go metal detecting without their water scoop.
      In addition to those who enjoy metal detecting beaches, there are also a few more very invaluable uses for a scoop as well. Many hardcore relic hunters will do anything they can to dig up artifacts of the past, which is why they are often very well respected. Oftentimes, historic sites, such as battlefields, old schools, or homesteads were located right by a body of water. When this occurs, some relic hunters will hunt that creek, river, or other body of water no matter what, as they know that there will be tons of good stuff below the surface. To effectively hunt these bodies of water, they will probably use a water scoop, as it is impossible to see what you are doing with a shovel or trowel. Using a treasure scoop will sift through the mud, sand, and sediment found on the bottom of the river to leave them with their relics.
      There is another scenario that gives metal detector beach sand scoops significance. This scenario is much like the relic hunting scenario, but with gold nuggets. Gold prospecting is an excellent way to find quite a bit of the yellow, valuable metal. Prospectors have no control over where gold will be located, so it is important to carry an assortment of digging tools. A treasure hunter will be well served in any bodies of water, such as creeks and streams, in addition to any sandy areas where they have located gold. You will be enabled to quickly sift through sand and soil to find your gold, saving you time and effort.
      The last reason that many detectorists own a sand scoop is that they have back problems or other body pains. Sand scoops can be purchased with a long handle, meaning that detectorists do not have to bend over to recover their target. To someone with arthritis, back pain, knee pain, or shoulder pain, this can be a saving grace. Not only will it allow you the chance to metal detect, but to do it with no pain and for a much longer time. If you are someone who struggles with body aches, a long handle sand scoop could change your life.
      As can be seen, there are a wide variety of uses for a treasure scoop, providing tons of flexibility and usefulness to the user. Whether it is in the places you are hunting or having body aches, there are multiple reasons to invest in a sand scoop that will last you for decades. Now that you see why you need a sand scoop, it is important to make sure you pick the best one for your needs.
      How to Pick the Best Sand Scoops
       1. Different Types of Sand Scoops
      Stainless Steel Sand Scoop: One of the most important factors that you can keep in mind when determining which sand scoop you want is the material it is made out of. Stainless steel is a best seller, as many detectorists might be hunting in or around salt water, which is highly corrosive compared to any other environment. Stainless steel sand scoops are built to withstand harsh environments with their heavy duty construction, providing buyers with a high-quality scoop that will last for decades. Stainless steel is entirely corrosion-proof, as long as you take care of it, and will help you sift through any amount of sand, mud, or water for as long as you need it to. Aluminum Sand Scoop: Another material that sand scoops are made out of is aluminum. Aluminum is very lightweight, and as long as you will not be hunting in salty, corrosive environments, these scoops can be a great addition to your digging tool selection. Even though aluminum scoops are lightweight, they are still built to last with heavy duty construction. Determining whether you want stainless steel or aluminum for your sand scoop is an important first step that will help guide your purchase. 2. Sand Scoop Handles
      Another very important factor that will help narrow down your purchase is the size of the handle of the treasure scoop. There are usually three distinct handle sizes when it comes to scoops. There is a short scoop, medium handle scoop, and a long handle scoop. Each of these handle sizes has its merits and downsides:
      The Short Handle Scoop: The short handle scoop allows for more control over the scoop in the sand, however it requires you to bend over, which can cause a sore back and muscles after a while. The Medium Handle Scoop: The medium handle gives you more control than the long handle, however it still requires you to bend over a bit, making it the best of both worlds. The Long Handle Scoop: The long handle scoop is great for your back and muscles, however it can be a little bit harder to extract your metal target at times. Determining the length of your handle on your metal detector sand scoop will give you a great idea of how you can narrow down your search, as each length is great for a certain type of person. While handle length is definitely an important factor, handle shape is another important factor. Depending on the way you metal detect, this can make a huge difference. There are three main handle types:
      A Standard, Straight Handle: The most common is a standard, straight handle. This protrudes from the metal sand scoop at an angle or straight out, and this handle type works great for most detectorists. A Curved Handle: There is a curved handle, which many detectorists who like to get close to the ground like, as it allows for a smooth scooping motion. A ‘Kick’ Handle: The final handle design is a ‘kick’ handle, which protrudes out at an angle to the basket and then curves downwards. The kick design is a great option for anyone who is looking for a longer handle for knee high or waist high water scenarios. While seemingly insignificant, handle design can make a treasure scoop much better for someone depending on their preferences.
      3. Basket and Sifter Construction
      One more factor to keep in mind when picking your water scoop is the type of basket and sifter construction. While the basket shape is generally the same for every scoop Kellyco offers, there are some differences in the mesh patterns. Some scoops are built for dry sand, and these are often made of a wire mesh that quickly recovers the smallest of targets. The wire mesh scoops are a bad choice for water recovery, as mud and sediment can ruin the mesh more quickly than it should. Some underwater search scoops are designed to be able to handle mud, wet sand clumps, and other sediments, and these feature a stainless steel coating with holes cut into the metal. These still capture small targets and can withstand the abuse of water hunting. In addition to this, there are also hexagon and round holes that make up the basket, and these essentially come down to personal preference. Think about whether you hunt in the dry sand or in the wet sand and water more often, and this will help guide your investment into the proper sand scoop.
      4. The Price of the Sand Scoop
      A final, and very important factor to many, is the price of the treasure scoop. Some of the sand scoops we sell here at Kellyco are built to be in a luxury or professional class of sand scoops. Others are built for the working person, who only wants to spend a small amount to get a quality tool to get the job done. Regardless of how much you are willing to spend, each of the scoops we sell are built to last and come with heavy-duty, high-quality construction. Once you have determined the price you are willing to pay for a scoop, you have the final piece to the puzzle.
      Conclusion
      Now that you have taken into account the price, basket and sifter construction, handle design, handle length, and the material the scoop is made out of, you should now be able to narrow down your search. At this point, you can browse through the treasure scoops we sell and pick the perfect one for you.
      At the end of the day, picking the right sand scoop can mean the difference between finding your buried treasure, and losing it in the waves. There is no reason to not purchase a sand scoop, whether it is the most expensive option or the most affordable option. Kellyco makes it a priority to provide the highest quality scoops for any budget. If you are someone who does a lot of beach hunting, relic hunting in water, or does gold prospecting in sandy or water environments, or someone who has back pain or other body pain, a sand scoop can be the perfect tool for you. If you have any questions at all about sand scoops or any other digging tools, please reach out to us with any questions, as we would be happy to help.
      What is the Best Sand Scoop for Metal Detecting? originally appeared on kellycodetectors.com
    • By Goldseeker5000
      I have been wanting a Walco pick for the last 12 years now and have had a hell of a time getting my hands on one. Last month I contacted Lucky Strike Gold Prospecting in Geelong Australia 🦘 and to my surprise, Justin said yes we will ship to the United States. He had the Solid Swinger handle and he had the Walco heavy duty pick with a 29" handle. It has taken a month for them to get here. This pick has a very well balanced pick head with plenty of length on the hoe blade to sink deep along the edges of a hole to widen it as you  have to go deeper.  I my opinion, and this is just my opinion but Apex picks just don't have the details figured out. They told me they refuse to lengthen the hoe blade. I told them then I won't buy an Apex pick. This Waco pick is light weight but still feels like it has enough weight to sink the pick deeply into the ground. Pick end and the hoe end. I'm impressed with this pick for sure. The Solid Swinger handle is awesome as well. Now I don't have to worry about breaking a handle when I am swinging that big 25" NF DDX coil. Hahaha 😁. Justin with Lucky Strike provided great customer service. I would highly recommend them.  Can't say I am too impressed with both the USPS and Australia Post on the shipping end of a month long.






    • By 1515Art
      I like carrying my small Apex pick but it’s always left me wanting a bit more when digging the blade is a narrow scraping down on a target but I’ve put up with it because it’s lightweight and digs OK.  A couple months ago the bracket welded onto the rear bumper holding my spare tire and aux fuel tank cracked and was starting to flop around held mostly in place by the large bolt the swing out arm pivots on. The bumper actually works well with the exception it’s breaking and a new setup would run me $1500 to $2000 so I decided to teach myself to weld on YouTube and bought myself a little mig/tig welder, fixing the bumper has gone well so far and I’ve branched out to other projects modifying my picks and a few other things. On my small apex pick I add two small wings with 1/4 weldable steel one to each side widening the pick from 3” to 5” and creating a scoop out of the blade, I also slimmed down the pointed side to compensate for the added weight of the blade and shaped the point better for getting down into and between the desert rocks. If this works well I’ll modify the Apex Tallon next.

×
×
  • Create New...