Jump to content

Tarsacci Deep. But An Issue - Pinpoint Button Sticking


Recommended Posts

Again the tarsacci finds the deep brass today in a colonial site. Love the machine.  Old stuff including a thimble at about 15 inches down.  Having an issue with the pinpoint button sticking though. Anyone else have this issue??  

Link to comment
Share on other sites


That thimble sounds impressive, especially if it was in Iron.

Have not had any issues with button function. Just the button pusher.

If it continues to be a problem you can contact Dimitar. He would want to know about it.

  • Thanks 1
Link to comment
Share on other sites

I have not had issues with my pinpointer button...

  • Thanks 1
Link to comment
Share on other sites

I live very close to you and have owned my Tarsacci nearly three years now. Call Dimitar and he is lighting fast on repairs. I have not had an issue with my pp button but I rarely use it. Should you not have your machine for DIV you can borrow mine. Good luck.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Awwww!! Thank you!! Thats very kind! I sent him a couple of messages.  Will try to call him today though.  

Link to comment
Share on other sites

7 hours ago, Dug2gld said:

Awwww!! Thank you!! Thats very kind! I sent him a couple of messages.  Will try to call him today though.  

He prefers to talk by phone as it’s easier for him to speak English rather than type or text. I am pretty much using my AQ thru the winter or a Excalibur so the offer still stands. Good luck.

  • Thanks 1
Link to comment
Share on other sites

1 minute ago, Carolina said:

He prefers to talk by phone as it’s easier for him to speak English rather than type or text. I am pretty much using my AQ thru the winter or a Excalibur so the offer still stands. Good luck.

I talked to him, and he is replacing the keypad 🙂 thank you again! 

Link to comment
Share on other sites

He’s great with repairs.  He genuinely wants you to have a great experience with this machine.  Mines been in salt water now nearly 3 years I bet I’ve not used the PP button but a couple of times.  

  • Thanks 1
Link to comment
Share on other sites

Yes! He is a great person to deal with.  Thanks!! 

Link to comment
Share on other sites

  • Steve Herschbach changed the title to Tarsacci Deep. But An Issue - Pinpoint Button Sticking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Kaolin washer
      i found a bunch of Gold ring s white gold , yellow gold ,small and large, from 12k to 14 k on the tarsacci i got a lot of bouncing around on the numbers in 6.5khz and almost non at 18khz most of the rings come in at 04--05-06-07-08 anyone noticed that as well ?
    • By oldcoinhunter
      My first 6000 was faulty out of the box which they replaced with a new one. I've had the new one for 21 days and probably used it 8 days before it went bad.  When i was boxing it up to ship back i heard something rattling inside of it, not good. In researching i found that they've known them to have major issues since March or April, yet they have refused to address the issue with a production stop or at least look at the different production runs and recall those units. I think when it's all said and done there will be a substantial number of them that are faulty worldwide. As it stands now, Detector Center states that there is a" temporary" 10- 14 day time frame for repairing them. My bet is that it's not going to be temporary. If this failure rate continues there may be grounds for a worldwide class action lawsuit, who knows. Oh, and i owned a business for 40 years. Not a very smart way to run a business. JMO.
    • By Flydog
      I've had a Gold Bug for 5 or 6 months now. Intermittently when I press the "+" button to increase discrimination  it switches into pinpoint mode, will stay there until I release the button and re-press and will then work fine (usually). I've ensured my fat little finger is no where near the pin point button.  Been telling myself its likely just some software glitch, annoying, but I can live with it vs. sending it in for repair.  Part of me says "get it fixed before the warranty expires stupid". Well cooler weather is here and I will be sending it in.
      Just curious if any of you have had the same problem?
    • By JCR
      I finally had a chance to get out with the MDT 8000 again this afternoon. I hunted a different area that is not so heavily iron littered. This was my first chance to run Mixed mode for any length of time. It is much more dynamic & telling than straight Disc mode. I was able to call the big iron & small trash just fine. Dug some nice period targets including an unusual Flat button in very good condition. It is classed as a Patriotic/Political button in Albert's book; PC106A. A pretty neat find for around here.
      Still learning the MDT & playing with Ground balance & Salt balance. Today was 12kHz,  Sens 6-7, TH -3, Disc +30. Not clean ground by any means but only 1-2 nails per sweep instead of a half dozen. This is sticky Red clay with plenty of natural Iron oxide, GB in the high 800's to mid 900's.
    • By relicmeister
      I sold an essentially new 9” hf coil to a guy who tells me after first use that it won’t stay connected to the remote. Does anyone know what the problem could be? He also says it should have come with a charger but I’ve bought several XP coils and they don’t come with a charger. I’m going to suggest he re-enter the coil serial number and give the coil a full charge. Coil was perfect for me. 
    • By Kaolin washer
      I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30  so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are .  6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43,  and this machine just starts devouring the ground ,  I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen.   the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working

×
×
  • Create New...