For My Aussie Mates. Finders Keepers In Kalgoorlie Is Carrying Some Of My Items Gspot Scoop And Gpx6000 CoverBy Doc
This may save some of our mates in Australia some time in shipping.
Finders Keepers Gold in Kalgoorlie Australia is carrying my GSpot Scoops and also the cover for the GPX6000.
Ring them up if you need either of these items.
Metal Detectors - Metal Detectors For Sale - Buy Metal Detectors Online (finderskeepersgold.com)
Address: 80b Hannan Street
KALGOORLIE WA 6430
Phone: (08) 9021 7207
KAC started a thread to show a new and awesome looking pouch from Garrett. It quickly got hijacked by folks showing their pouches and F350Platinum suggested someone start a new Pouch Comparison thread... well I'm your Huckleberry! Let's see what you got. Pouch preferences preferred. 😎
Here are some of mine... I know... I have a problem... 😆
I'm always looking for new stuff to try out on a limited budget, and think I may have found an interesting new item.
I like the Calces365 waterproof beach bag, I've been using it for everything for quite a while, but my last coin shooting trip to the campground took the zippers out on the bag, the dirt and sand ate them up. I trashed the finds pocket by zipping it more than 300 times in 4 days. However, for $13 they are easily replaceable if not sold out.
Recently I was looking for a replacement, the beach bag belt belt is too thin to hold my pinpointer and Doc's shovel bag well, it does but it isn't great. I came across the above rig, apparently new from Calces365. It's only $19.99.
It comes in camo and black. It has two pouches Velcro-attached to a very comfortable and tough belt. One has 3 pockets, front, large inside, and Velcro-closure mesh inside. The other is a large trash bag with a mesh bottom and a drawstring that can fold up small. Velcro doesn't wear out too fast if you brush the dirt out of it from time to time. They should probably use self-repairing zippers but that would drive the cost up.
It has a 52" belt that has one drawback, if you have to make it small the bags almost go to your back to attach to the inside Velcro. I'm tall but not "big". If they sewed Velcro to the first 8" of the outside that would fix it. You can slide the pouch under the outside if you want to, but you'd lose some hold.
The belt can easily hold a pinpointer loop (wish it had one) and whatever else you want to attach. I know some don't like mesh in a bag, so you could throw a small towel in the bottom to keep sand from falling out, I have no problem with the trash bag getting lighter but it never seems to. 😀 It's about as large as I would want it to be as well.
It can be found here and probably on eBay:
By Nokta Detectors
Check out our new accessory packages! The accessory packages will provide you with all the necessary accessories that you can use with Nokta Makro detectors at unbeatable prices! Makes a great gift for the upcoming holiday season as well! https://www.noktadetectors.com/accessory-packages/
I picked this up on Ebay for my updcoming trip west:
I like the lightweight, compact design. The overall quality is quite good, with the aluminum parts appearing to be anodized. Shown in the photo is the central magnet assembly removed from the hexagonal tube. Here are a couple concerns I have:
1) Particularly when installed, the effect of the magnets seems weak. I think the ad says 13 1/2 lb pickup force (however that is measured) but given the distance of the magnets from the outside of the hex extrusion when fully installed, it doesn't seem to have much strength.
2) The magnet frame assembly weighs almost half of the entire unit -- 408 g vs. 430 g for everything else. That's not so bad, but for hiking and backpacking, every ounce saved helps.
3) The magnet assembly (when installed) rotates 360 degrees without any stop/lock to hold it in a desired position. My guess is that bumping either end on a rock or vegetation (think of the black plastic ends as knobs) could cause it to rotate to an undesirable position.
The design is clever in that in order to clear the rake after filling with iron trash you just rotate the magnet assmbly until the fork tines push off the nails, wire, etc. -- a type of easy self-cleaning. However, I might be willing to dispense with that feature to mod it for stronger pull.
So here's some advice I'm seeking: Do I replace these alnico magnetics with neodymium ones? If so, how many and how strong? Should I stay with the magnets on the inside or just attach them outside, and if the latter, where?
I should have included a ruler for scale. The width of the rake is 10.5 inches (267 mm) and the tines are 1 inch long and 7/8 inch separation. Each hexagonal face is 3/4 inch across.
Does anyone know a way to dip in grass without the grass dying. When digging in my yard, I try to not kill the grass. But the circle of grass in dig always turns brown/yellow. I was wondering if there was a way to prevent this, or is this something that just happens. Thanks!