kac Posted May 22, 2022 Share Posted May 22, 2022 One of the things I was never crazy about with the Nokta Multi Kruzer is the arm cuff. I have repositioned it a few times and found all the way back works best but still bothered me. For some reason they don't put any padding on them so I picked up some adhesive back neoprene sponge foam from fleebay: https://www.ebay.com/itm/392861271576 I first tried 1/8* and it works great, easy to put on but can tear easy off the edges. Wasn't sure how it would hold up but on the cuff it works great. Descided to toss an extra layer on and it stuck fine and trimmed off the edges. Super easy to put on and softer than what the other manufacturers use. Because you can apply it in layers it is easy to beef up spots in areas you may want. 3 Link to comment Share on other sites More sharing options...
Rick N. MI Posted May 22, 2022 Share Posted May 22, 2022 Good job! Looks comfortable. Link to comment Share on other sites More sharing options...
F350Platinum Posted May 24, 2022 Share Posted May 24, 2022 Ordered some for the Deus, nice job on the Kruzer! 👍 I have a slip on neoprene pad, but it could use some help. 😀 1 Link to comment Share on other sites More sharing options...
phrunt Posted May 24, 2022 Share Posted May 24, 2022 I found the same with detectors with no arm cuff rubber stuff so I bought some sound proofing insulation rubber self adhesive stuff from Aliexpress, it was only a few bucks delivered and super tough and does the job nicely, it also comes in various thicknesses, it's designed for sticking your car for sound proofing so it's obviously pretty hard wearing. This is the sort of thing I'm talking about although not necessarily the one I ordered, I can't remember the exact seller I got mine from, same stuff though by the looks of it. 1 Link to comment Share on other sites More sharing options...
midalake Posted May 24, 2022 Share Posted May 24, 2022 I just buy cheap mouse pads. Cut them to fit. Glue it down. Link to comment Share on other sites More sharing options...
kac Posted May 24, 2022 Author Share Posted May 24, 2022 Stuff I used isn't super durable on the edges but surface is holding up well. Much softer than what is on other machines. Mouse pads are a little thick on this cuff and too hard. Tried that. Link to comment Share on other sites More sharing options...
JCR Posted May 24, 2022 Share Posted May 24, 2022 I do the same but use wide adhesive back Velcro, pile side up. Soft & wears well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now