Jump to content

New Makro Simplex With Coil Warning


Recommended Posts


I've not experienced nor actually heard of what you are encountering. Could possibly be a faulty coil, but the first thing I would do is do a factor reset. And, or, if you know anybody with a Simplex try their coil, or even contact your dealer for trying same. Last resort is contacting Makro. Good luck, HH jim tn

  • Like 1
Link to comment
Share on other sites

  • 3 months later...

the one thing I have noticed with the Simplex and the Legend when connecting the coil cable to the control pod get the connector lined up then start to tighten a little at a time, tighten then push in on the cable at the control housing connector then tighten a little more then push in the cable a little more keep doing this and it will eventually be completely seated into the connector at the control pod if you do not do this you will get the coil warning every time

Link to comment
Share on other sites

  • 4 weeks later...

I have recently had the same issue, although I have tried the tightening technique stated above and a factory reset and has not worked. There is also a white flash that will come out of the coil port under the screen, as such I think mine is faulty 

I would appreciate some feedback if anyone has ideas or can relate.

Link to comment
Share on other sites

Sounds like you will need to contact the Nokta Repair Center.

Link to comment
Share on other sites

2 minutes ago, JCR said:

Sounds like you will need to contact the Nokta Repair Center.

Hi thank you for the swift reply, I bought it from amazon and was still in the time window to get a replacement, I thought since of that it would be easier to do that

Many thank, happy new year

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...