Coiltek 6" Goldstalker Question

[Luis]

Can someone give me some information about this coil?  I have seen a new one but I don't see much information about it on Youtube.

[Valens Legacy]

If it is for the NOX it will work fine on the small gold, and is a great coil.

Good luck and good hunting.

[RickUK]

I use one on my Whites TDI,its a Mono coil and as light as a feather....must admit i really do like using it originally designed for the GPX/GP and other allied models but works very well straight out of the box on a TDI Pro but if you do plan on using one on a TDI as the lugs are slightly wider you either need to pack out with washers or use a Minelab bottom rod....but this little 6'' Mono coil certainly gets my vote for sure.

[Steve Herschbach]

9 hours ago, Valens Legacy said:

If it is for the NOX it will work fine on the small gold, and is a great coil.

Good luck and good hunting.

No, it is a 6" mono coil made for PI, specifically all Minelab models GPX 5000 and earlier, plus the White's TDI. Great little sniper coil for those models.

Small Coils For Minelab PI

[Luis]

i forgot to say it was for use on a gox 5000. i would like to know if there is much difference in depth and nugget size that can be picked up with this coiltek coil compared to nugget finder's Sadie 8 x 6

[Valens Legacy]

13 hours ago, Steve Herschbach said:

No, it is a 6" mono coil made for PI,

Thanks Steve, I had no idea.

I guess that my newbie is showing through as to not know the difference yet.

I know that the NOX 6in coil is good and also the 10x5 CoilTek coil is great on the creek banks.

 

[Steve Herschbach]

On 2/2/2023 at 11:04 AM, Luis said:

i forgot to say it was for use on a gox 5000. i would like to know if there is much difference in depth and nugget size that can be picked up with this coiltek coil compared to nugget finder's Sadie 8 x 6

no

[Luis]

Ok. Thank Steve