Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By billdean
      I have broken my head phones that came with my Minlab monster 1000. I have tried searching for another pair that will work without rewiring everything but I don't understand exactly what it is I need. Can anyone recommend a good pair of head phones for the Monster 1000?
    • By Ridge Runner
      I stand about 6 feet but the GM 1000 shaft is just too long. So this is what I done to make it right for me only.
      I first put the shaft together then put the large coil on.
      Then I slip the control head on and found if I put it just past the end shaft where the middle starts is just right for me. I then slip the arm rest where I wanted but this leaves the shaft hitting me when I swing my detector. I took it and cut off 5 1/2 inches. this still leaves 2 inches behind the arm rest.
      You can now unscrew  the end shaft with arm rest from the other. You now have the control head with the coil on two parts of the shaft and the other with the arm rest. When you screw them back together you may have to adjust the arm rest a little.
      You will find the longest part with the head and coil is 36 inches. I buy gun cases for my metal detectors and most are 38" if not longer with three big pockets on one side. The cost runs about 79.but can get them on sale for 49-59.
      Be sure this will work for you before you make a cut.
      Chuck
      PS The end shaft is aluminum and you can knock the plastic plug out after you cut the shaft to put it in the other.
    • By Andyy
      All - I thought I would share an idea on carrying your gold monster.  This is more for those of you that hike very far before you are ready to detect, or maybe you already have your hands full with another detector like a GPX or GPZ.  It is not an original idea but one I saw recently for carry spare fishing poles.  I recently tried it on a night hunt and really liked how it handled.  It allowed me to use my GPZ and then switch to my GM1000 when I hit the bedrock.  A major caveat is that I have converted my GPZ to telescoping rods, but I think the idea might still be useful for some people.
      For starters, this is for people who have made their own stand with PVC pipe fittings.  you simply remove the elbow at the end of the stand so that you have a straight piece at the end.  This is key, because the first contact point is low on your Camelpak (or other backpack). 
      For this low contact point, you need a zip tie or similar method to make a loop.  This is where you put the pole end of the GM1000, then you swing it over your shoulder and hook it to a caribiner that is latched to a high point of the backpack, typically the carrying handle.  I used a caribiner but you could sew a velcro loop on there with back pack clips.  There are many ways of doing this.  Whichever way you choose, don't forget to bring the stand with you. 😃



    • By Steve Herschbach
      I purchased a Golden Mask telescoping rod with the intent of using it for my Deus HF elliptical coil. XP placing the battery in the trapezoidal lower rod section however made an adaptation more trouble than it is worth for something I am not sure I will keep anyway. I decided to repurpose it instead to the Minelab Gold Monster 1000 in an attempt to make it as easy as possible to collapse down and put in a rucksack.

      The arm cup removal is easy. Just remove the bolts. The grip/handle however is both screwed together and glued. Have to give them credit - beautifully made rod assembly. Some heat from a hair dryer and careful prying got the grip assembly off the rod.

      The upper rod is thicker than the standard rod diameter and so the neat little clamps Minelab includes with the GM1000 will not work. Instead standard hose clamps will serve until I get some that fit better.

      The upper rod is not quite long enough to get the proper spacing for the armrest, so this is a mockup until I find a short piece of rod the correct diameter to install in the upper rod for a little extra length. Roughly 30" long when collapsed. The coil needed to be shimmed with an extra rubber washer. I used the skinny little Golden Mask plastic bolt but will drill the isolator rod out to accommodate the Minelab bolt later.

      Near final product, with way more length fully extended than I need at my height of 5'11" but that is good for working overhead cut banks and poking around in the brush. Click all photos for larger versions. Once I get the rough edges finished this will be a sweet little backpacker unit.


    • By Boogness
      I’m looking for input about these three machines on what you like vs dislike on each of these detectors. 
      Me, personally since I do not own or even seen any of these detectors will even give my own likes vs dislikes.
      GM1000 - I like how it is a very hot machine capable of finding small stuff and how I hear it is a turn on and go detector with only a ferrous/nonferrous indicator. I don’t know how it reacts to hot rocks or if there is away you can avoid them. The best part about these three is I hear it’s the simplest to use(thinking about my dad who is interested but doesn’t have the patience to learn machines if he ever wants to use one of mine)
       
      Equinox - again I like how it is hot on small gold and even more with the new 6” coil. I hear it’s water proof? I don’t know how complicated it can be to learn this machine or if it can read the ground for search a good spot to run a sluice.
       
      Whites 24k - pretty much if it is hot on small gold I like the idea. What I really like about this machine is it’s ability to track black sand for a possible prospect. I like the option to cancel out the iron on both the low reading numbers and the high reading numbers. I’m thinking this might be a little complicated for a newbie with all the functions but I really like the controls the machine has. 
       
      Bottom line is I am trying to decide which new detector I am gonna buy next year and want to hear your likes and dislikes about each of these machines.
      Minelab Gold Monster 1000 Information page
      White's Goldmaster 24K Information page
      Minelab Equinox 800 Information page

      Minelab Gold Monster 1000 vs White's Goldmaster 24K vs Minelab Equinox
    • By Sourdoughmoe
      i want one, i had the gmt but sold it now i just have a gpx5k and need another vlf since i have the pi covered, which one should i get and why?
      Minelab Gold Monster 1000 Information page
      White's Goldmaster 24K Information page

      Minelab Gold Monster 1000 versus White's Goldmaster 24K
×