Jump to content
Sign in to follow this  
augustwest

Blind Lead...

Recommended Posts

I hit this pocket out hunting along a contact zone. I think it is  native silver, but there have been no historical accounts of silver being found, only platinum and gold. Upon inspection with the microscope I can see gold popping out in a couple places. The large nugget was on the top of a vein of decomposing calcite and quartz, you can see on one side where the rock fell apart leaving some interesting formations. The large piece is 3/4 of a ounce and the foil like piece, that was found downhill, is about a 1/4 ounce. So this is most likely silver but anybody ever see platinum gold ore? The pieces came out very clean with very little magnesium oxide coating. The only thing that has my mind wandering is the fact that the source of platinum has never been found in the area, no historical accounts of silver being found and it came out of the ground really clean. Anybody see anything like this while out hunting for pocket gold?

FullSizeRender.thumb.jpg.0337add5715be8ab7a36e43fbbcf6be7.jpg

IMG_1237.thumb.JPG.78e69e52fb9bdb5d2901df9e7e5f630b.JPG

FullSizeRender 4.jpg

FullSizeRender.jpg

silver2.jpg

silver3.jpg

Share this post


Link to post
Share on other sites

If you just showed me the pictures with no back story attached I would say melted aluminum. I have fished globs like that out around campfire sites many a time. Melted lead/zinc from batteries is also common. So question number one - is it heavy for the size?

Some Common Ore Test Procedures

  • Like 2

Share this post


Link to post
Share on other sites

It's pretty heavy for its size 3/4 ounce but it has about 20% calcite inside the metal. The white material on the microscope image is rock matrix. Also it was attached to a calcite/ quartz vein I pulled about 15 pieces of the crumble vein material underneath that also has the silver metal in it. I though it was junk at first but i chopped it out of bed rock and it appears to have calcite that grew within the metal.  

Share this post


Link to post
Share on other sites

Wow...awesome. Lets hope it is platinum.Very interesting. Thanks for sharing.

JW :smile:

  • Like 1

Share this post


Link to post
Share on other sites

It's either something cool or another hunk a junk. Haha

Share this post


Link to post
Share on other sites

The fact there is rock matrix within the metal is a good sign that it isnt junk. Unless somehow it is some kind of slag but the location of the find would seem odd for that to be the case wouldn't it? Gezzzz...I want to know now as much as you. Hurry up & find out. How am I going to sleep tonight without knowing?? :biggrin: Cheers

JW :smile:

Share this post


Link to post
Share on other sites

I just ordered the acid test kit so we should find out within the next couple days. 

  • Like 1

Share this post


Link to post
Share on other sites

You called it Steve just a hunk of junk. This had me fooled it even melted around quartz and other local rocks, some of the aluminum even melted and dripped around quartz and made it look like some kind of ore. I picked up a precious metal test kit  from scientific supply and was able to quickly determine this is junk. oh well I'll keep looking for the good stuff.

Share this post


Link to post
Share on other sites

I am sorry to hear that but it does happen a lot unfortunately. Not just campfires but old buildings burning down etc 100 years ago leave melted blobs of metal behind long after the signs of fire are gone.

Share this post


Link to post
Share on other sites

That is a shame....so was it melted aluminum? If so then it probably wasn't very heavy for its mass. Compared to say lead. But even lead would be a lot lighter than platinum. Oh well....on with the search. Thanks for letting us know. I can sleep easy now. Phew....

Good luck out there

JW :smile:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Noah (FL)
      EDITED.........For a first timer just doing some experimental nugget hunting would it be worth a GPAA membership for access to the claims or just doing some research and hunting BLM land?  Will be in Phoenix visiting a friend after a work trip that ends in Vegas. I am entertaining renting a car instead of flying and trying my luck for nuggets along the way!  
      Thanks...Noah
       
       
      What group/club is best for AZ or NV gold detecting claims???   First time detector prospector looking for a nugget!!!
      Relic/coin hunter from Florida planning a vacation.    Thanks
    • By nugget hunter
      has any one air test the scuba tector on large objects ????? i like to know it max range ......i seen its worthless on very small targets ....whats it range on a helmet , rifle ,  truck size object ....the targets i look for  are 12 to 24 inches deep could the scuba tector in wet sand go this deep ???  or does it max out at 12" am guessing 2.5x the coil size like other pi detectors do ....
    • By nugget hunter
      any info or ideas  on what would find more nuggets ?????
    • By Swifty
      Seeing that most of the regular posters are experienced detector users, I'm a little curious what type of threshold  you prefer.
      I've noticed there seems to be 3 main choices for threshold.
      1. Running hot, detector sounds a little unstable but still a target stands out from the rest of the sounds.
      2. Running smooth and steady listening for any change in sound at all.
      3. Running close to, or actually silent with a target the only sound made excepting an occasional EMI burst.
      And second are you using headphones?
      I run my 7000 close to silent, and my discrimination detectors with a smooth threshold.
      I use headphones on everything.
    • By Gerry in Idaho
      On my FB a few weeks ago I posted a photo of a thin metal tin rectangular in shape that had Chinese writing on it. Yes I know it is an opium tin, but what does the symbols say? Found these 3 at an old mining site with Equinox. Thanks for your help.



    • By Bhogg
      Hi Everyone just wondering about Gold Nugget Settings?.
      I haven’t seen or heard  much about Settings for hunting small nuggets and also hunting them in highly mineralised soils?.
      Very interested to see how it’s going to compare against the Gold Monster, as it’s very sensitive on very Tiny bits.
      So if anyone’s been having some great success with it I’d love it if you could please share some settings and tips.
      Thanks Everyone for your time and help it’s greatly appreciated!!.
       Cheers All
×