Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Ronjas
      One year ago My husband and I decided to try our hand at metal detecting.We were total newbies with a steep learning curve. We purchased a used Xterra 705 for our starting machine. We downloaded and printed Randy Horton’s Xterra guide and have read it many times.  It is a valuable tool for any Xterra owner. We spent the last year educating ourselves on the basics of metal detecting and getting to know our machine. 
      We are feeling pretty confident about the Xterra except for one issue.  I am looking for advice on any errors we are committing or if we possibly have something wrong with our detector.  We have contacted minelab, but they never got back to us about our issue.  So here goes...
      We are having an issue with TID numbers with in ground silver. We have several old silver coins we use for testing.  They air test  perfectly per published Xterra TID charts. When we place a coin (dime, quarter or half dollar, doesn’t matter) in a dug plug and cover, the coins register as ferrous (-8, -6 or -4) every time regardless of the coil we have installed.  We have the stock 9” 7.5 kHz and the 6” 18.75 kHz Double D coils.  We cannot get silver to register as anything but ferrous in the ground.  The depth does not matter.  
      We usually run in all metal or discrim 1 on occasion.  We go through a set up each time we arrive at a place to detect that includes noise canceling, threshold, sensitivity and manual ground balance, although we usually detect in auto ground balance. We use 99 tones and silver in the ground has a ferrous “thunking” sound to go along with the TID numbers.
      We have reset to factory setting several times in the hope of solving this issue to no avail.  We are out of ideas and possibly need service.  Thank you for reading this far.  Any advice or suggestions are welcome and appreciated.  
       
       
    • By Nuke em
      Tuesday evening after work i went to the beach again , even though it was a bit cooler and misty i thought maybe there would be something to be had. I got to the beach at around the same time as the last time at 7.15pm and used my Terra , i took the Nox with me in case the lower beach looked suitable to detect . But it didn't , using the Terra is easier on my beaches on the dry tops.
      I searched the same beach as last time plus another East and by 10.30 i was almost finished when a couple with a torch appeared and were looking for something . They said the Girl had lost a Silver ring , they seearched one area but i thought after looking that they must have lost it slightly further away . And i was right , within a few minutes i had found it . So thats 19 i have had this year , though i dont have a picture of it . My total finds for this search were 2 Junk rings , a junk ear ring , the Silver ring (returned) and £30.69p and also 2 Pencil sharpeners ! 
      My next search will be with the Nox further West on Thursday morning for low tide . Time to find Gold , if its there . I know fresh coinage might be boring to some but to me its what pays for my machines and thankfully it does. It will be a sad time when it all finally goes cashless , finding coins will be very nostalgic .

    • By wanderer
      I am going out on my first detecting trip I think I'll be using an xterra 705.  The area I am interested in  is south western idaho generlly around  silver city the war eagle mine  and a few other spots up there> I still have alot to do in terms of research  and permission.   I t looks promising , rugged and well who knows?   Does anyone know if this  is what you would call a mineralized soil area?   I may drive on over to  the Jordan valley area of oregon as well.    any knowledge on this location?
      Thanks in advance.
    • By vanursepaul
      Hey y'all-------this is the link to a bunch of pictures and one video of the coil repair----
      It isnt the prettiest job but it will hold up now!
      We used a piece of a PVC gutter downspout my buddy found while we were prowling thru the hardware store trying to find something that would work and hold glue--(Thanks for the tip on nylon--)
      Anyway, once we finally found that piece it was pretty simple,,,if you lived in a bigger town you may be able to find standard PVC L-brackets and that would save a few steps!
      Total cost was about 12.00 usd..... plus the fun we had making it...lolol---- (Grumpy Old Men)
      Thanks again for all your alls help in this 705 adventure!!!!
      Paul
      https://picasaweb.google.com/104592762424805629687/705CoilEarRepair?authuser=0&authkey=Gv1sRgCKS_4ZfMhpqnSA&feat=directlink
    • By GB_Amateur
      An acquaintance has asked if I'd help him find some shotguns he buried several years ago.  They are wrapped in oilcloths, sealed in PVC pipes (~3 in = 7.5 cm diameter) and buried about 20 inches (half meter) deep according to him.  He says he can show me the approximate location within about 10 m.  If all this is accurate it seems like an easy task....  Then again, he also said someone in his family (without him being present) tried to find them with a detector and couldn't.  That could be due to a lot of reasons as I'm sure you are already thinking, but my concern is that they may be buried more deeply than he remembers.
      Which of the following would be your first choice?
      1) TDI/SPP with 12 in round mono and 16 V battery pack.
      2) X-Terra 705 w/15 in Coiltek 3kHz.
      3) Gold Bug Pro (19 kHz) w/15 in Nel Attack.
      4) F75 black (13 kHz) w/11x7 in^2 coil operating in cache process.
      Assuming he has the time and patience I'm going to have all four with me to do a comparison, but I'd like to start with the one that gives me the best chance.  Your advice is appreciated.
       
       
×