Jump to content
Dakota

Whites V3i For Prospecting ???

Recommended Posts

Gerry hit the nail on the head. It really depends on what a person wants a detector for overall that matters. The V3i is a detector nerds dream, and it can find gold nuggets. That said I would look at it first and foremost as being a coin, jewelry, and relic detector. Nugget detecting is probably last on the list of things the V3i does well. Overall even though I have a V3i I concur with the general idea that I would rather prospect for gold with an MXT. It is just more straight forward for getting that particular task done.

The V3i really needs a ground grab button!

Tom posted the link above to my buddy Marko doing quite well with a V3i at Ganes Creek. I just happened to be there that week and he was really on a roll.

  • Like 4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Steve Herschbach
      I just purchased a brand White's V3i from the factory as noted on another thread. The brand new machine much to my surprise comes with new new redesign of the White's D2 10" round DD coil. I say surprise because I ordered a scuff cover for the coil, and although it went on the scuff cover is larger than the new coil, especially along the inner edge of the right side and so there are large gaps between the edges of the coil and the scuff cover. The new coil has been shaved here and there for a thinner more modern appearance versus the older squared off look.

      I looked and have seen no change in the part number on any sites nor any mention of this new coil anywhere. White's needs to make this known and hopefully a properly fitted scuff cover is available or in the works. It could be it just happened and I am one of the first with this coil and so jumped the gun a bit while dealers clear old stock.
      The old D2 coil has been quoted at 17.9 oz or 498 grams which I have to question as my new coil weighs 1 lb 2.6 oz (18.6 oz) or 526 grams on my postal scale. Can anyone get get an accurate weight on the old D2 coil? Include the cable as I have done - I hate it when cable weights are excluded, as if we are going to swing the coil without a cable. That may account for the discrepancy as I find it hard to believe the new coil weighs more than the old coil, unless the internal windings are different/heavier.
      This coil is also compatible with the White's VX3, all versions of the MXT, the MX5, M6, and DFX.


    • By johnedoe
      I am still waiting for a good test and comparison on the E-800 vs the V3i.
      I know the E-800 is far simpler but ............. How do these two stack up.
    • By Steve Herschbach
      An amazingly nice job by this person....
      http://metaldetectingforum.com/showthread.php?t=243881
    • By Hibby
      Hoping someone can help me out. I just need to know in basic terms what is the best way to customize a program?  I spent an hour or so modifying the coins and jewelry program to be an exact copy of Magic's renowned program only to accidentally overwrite my changes in the last steps. So I just want to know what method (steps) I should use to modify the program and then rename it as "Magic". I'd like to retain the coins and jewelry program as well so ultimately I'd prefer to overwrite the 'common' program.
       
      thanks in advance,
      Hibby
    • By ☠ Cipher
      What's your guess about where the dongle would've plugged in? Headphone jack? 
    • By ☠ Cipher
      I've had a lot of machines come and go since I began the hobby. One machine I will not part with is my V3i. About a year ago at tax return time money was no object in the realm of hobby machines. I could plunk down cash on a CTX-3030, XP Deus or trade up to a V3i. It was a difficult decision and one that required research, and even hands on testing to determine what was the best fit for me. The following is a compilation of the arguments that convinced me to go with a V3i:
      The V3i is a true 3 frequency machine. FBS machines, although the claim is made that they TRANSMIT 28 frequencies, apparently only USE (transmit, receive and process) only 2 fundamental frequencies (3.125khz, 25khz).
      http://www.dankowskidetectors.com/discussions/read.php?2,24272,page=1Those frequencies emit harmonic byproducts which are not actually utilized, but which any machine can claim to transmit. Whites could follow this business philosophy and claim to transmit 42 or more, but this is not helpful. 
      The V3i can operate in single frequency mode. The CTX-3030 cannot. Being able to operate in single frequency mode provides a depth and speed advantage as all the power of the the machine is dedicated to that particular frequency rather than divided up among many. Conversely, the XP Deus operates in selectable single frequencies, but cannot process them simultaneously, putting it at a disadvantage in discrimination and higher mineralization . 
      The V3i is true SIMULTANEOUS multifrequency, meaning all 3 frequencies are transmitted at the same time. Often what is referred to as "simultaneous" is a loose interpretation of the term. What is really happening is their frequencies are transmitted in a timed automated sequence and processed in the time domain rather than simultaneously. This approach causes a greater delay in recovery and target separation often overlooking good targets in iron infested sites.
      The V3i offers by far the most access to feature parameters that are usually only available to the manufacturer. When features are locked to certain specific presets a machine will perform reasonably well across most conditions, but will not be optimized. The V3i offers you the option of optimizing its performance in any conditions. This has caused many novice and even experienced detectorists to become intimidated by the V3i. Don't be. The V3i has turn on and go modes and factory defaults like any other machine. In every endeavor the V3i seeks to offer the best of both worlds. It offers you the chance to reach your full potential across all mediums in your own time as you figure out what works best for you, or simply use factory programs. 
      The Spectragraph. This allows the user to see what is going on with any one or all three of the frequency it utilizes. It is more information and tell tale signs to help determine the size and composition of the target. It is more information to help determine whether to dig or not to dig. VDI systems are imperfect predictors on every machine. Many variables affect its accuracy and so it is just one consideration among many regarding whether to dig or not to dig.  
      The V3i is more consistently "hot" across the spectrum of metals than either the Deus and CTX-3030. You'll often notice in the forums that smaller gold is not the strong suit of FBS machines. Due to their configuration, they favor high conductors and overlook smaller gold. The Deus in similar fashion needs a whole different and very expensive coil to notice small, low conductors such as gold. 
      (With the Deus, this is the equivalent of buying a whole new metal detector, because the coil IS the metal detector. The pod only deals with information. That is why it is referred to as a "remote." That's all it truly is. So each time you purchase a coil you are forced to buy all the other hardware that is usually housed in the control box over and over again. These coils will necessarily have to be serviced at some point due to its hardwired battery. The likelihood of long term failure of such a configuration is concerning as well considering that all the sensitive electronics are housed in the most vulnerable part of the machine. Imagine taking your control box off and bumping it up against stubby corn stalks, rocks, tree trunks and other hard mediums over an extended period of time.)
×