Jump to content

2018 - Year Of The Equinox!


Recommended Posts


Thanks  for the info Steve, excellent write up!!  I have 4 spots that I'm convinced are "worked out" I have been hitting these places hard for the last 3 years with the Etrac and CTX, with every size coil(Etrac) and from every direction until finally they've played out. I'm betting the Equinox is exactly what the doctor ordered as all of them are polluted with iron and trash. I'm banking on the speed and the flexibility of the use of tones to bring to light a few more quality finds.  I'm getting both coils if they are available at the time of the shipment of the Nox. I'm thinking even with the big coil, the recovery speed might offset the size of the coil in relation to masking(hoping) I'm very much looking forward to putting the Nox to the test in these spots, if it does what I'm hoping, and I'll be surprised if it doesn't, it'll be the perfect clean up machine for the CTX.

  • Like 2
Link to comment
Share on other sites

Very nice work Steve, thanks.

I'm really looking forward to what people experience with the Exuinox on quartz piles, gold fields, trashy goldfield camp sites - hopefully JP can soon  share some experiences.

Near the keys in the photo - could almost be a Bitcoin :laugh:

Shame about the frozen ground - maybe you need an Oz trip :wink:

Link to comment
Share on other sites

My goal this year is to find a gold coin as well so the $64,000 question is what is a gold coin going to ring up on the Equinox? 

Link to comment
Share on other sites

Thanks for a great report Steve , Iv'e taken all the info in that your forum has released  preparing for the opportunity to have a crack in the Golden Triangle in AUS . This may sound silly but I haven't been impatient for the release and I'm not fussed when it happens . In the mean time I take note of all the old miners camps I come across when detecting with my SDC . I'm always dreaming of a gold coin find in our historic goldfields . Maybe in 2018 I will tick that most wanted box . I love finding gold with the SDC but with a coin your mind drifts into thoughts of who had it , how and what circumstances was it lost . That's enough for me , wishing all members a safe, healthy New Year and lot's of great finds in 2018 . 

Cheers

goldrat

 

  • Like 2
Link to comment
Share on other sites

Thanks Steve for that excellent report and very pleased to see your returns from extremely productive sessions.

I have in my mind one of my permissions where the Equinox is going to have a field day, it is the site of an annual four day music festival where I have hit it late in the summer for 4 or 5 sessions each year and producing over £100 a session and over the past 4 years I have used the CTX3030 with a program which I concocted using a total blacked out screen and then only accepted the UK £1 & £2 coins because this site is covered in ring pulls, silver paper and tiny bits of pie case foil  and crown caps and another thing which I didn't want to find is the UK copper and clad coins as it takes 100 kneeling and digging times to get the equivalent to a £1 coin.

The only drawback to using the CTX with this massive amount of discrimination is the total loss of any detection depth I could only find signals to no greater depth than a couple of inches and I can see the Equinox hammering this site.

 

  • Like 1
Link to comment
Share on other sites

With all that said I now realize why you were selling all those machines back in the fall.

 

Link to comment
Share on other sites

I'd like to add to my comment.

It is a wonderful eye opener when a new machine suddenly opens up hunted out sites with so many good finds.  I had the same thing happen to me several years ago when the Fisher F75 first came out.  Actually the complete story is posted on the Fisher lab website under F75 field test report #2, http://www.fisherlab.com/hobby/field-tests/f75-Mark-Gillespie-Report.htm 

Don't take it wrong by my mentioning this, but after reading the main post I'm now convinced the Equinox will give similar experiences to each one that purchases one.

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Mick93
      We do like Steve,  wife sold her nox 800 just before 3 years and ordered her new one. Showed up today and she was all excited ,put it together, charged up ready to try it out. Well the on/off switch wouldn't work!  She was a little disappointed but Minelab said send it in, so off it went !
    • By Jeff McClendon
      I have been suffering from plantar fasciitis and torn ligaments in my left ankle for about 6 months. The plantar fasciitis has cleared up on its own. The torn ligaments have not yet healed so hunting with a dig it all approach just hasn't been possible since last March. Walking is iffy enough, but lots of getting up and down is very painful. So, I have had to limit myself to shorter outings and lots of cherry picking.
      I tried an experiment using the F2 iron bias feature during my recovery for some of the parks I hunt that have high iron mineralization. I used Park 1 and Park 2 with F2=4 and just concentrated on obvious no brainer signals. Deep or shallow didn't concern me, just the quality of the response. I hunted with both zero discrimination and with half of the iron range rejected = -9 to -6. My target recovery of deeper low to mid conductive targets pretty much ceased to exist during this time.......deeper silver jewelry and coins along with any depth of higher conductive US modern coins (wheats, copper memorials, clad dimes and quarters, Kennedy halves and modern "gold" President and Sacajawea dollars) was seemingly not effected.
      Today, I hunted an exact area that I had hunted a month ago with those settings except that I hunted with F2=0 and dug every target that sounded good. I had already cleared out the higher conductive clad so none was found. I tested every low to mid conductor target from +6 to +22 (the gold and small silver jewelry range) that sounded decent using F2=0, and then switched to F2=4 and F2=9 before I dug the targets. All of these targets which were clear and obvious targets using F2=0 were beyond the range of my handheld FTP Tek Point pinpointer that was set on maximum which usually reaches coin sized targets down to 3.5 to 4" in this park. All of the targets in the photo except for the first two modern pull-tabs (bright silver and red surface finds) were recovered at deeper than 4". Some were as much as 8". They all sounded very good with repeatable signals in all four swing directions (+), and had dig me gold range numbers using F2=0. Using F2=4, all of these targets were iffy at best and the deeper ones sounded mostly like iron. Using F2=9, all of these targets were mostly iron with just a hint of low to mid conductor tones and corresponding numbers. 
      It is no wonder that I previously walked right over these targets since I had limited myself to digging only excellent sounding targets due to my injury. Even if I wasn't injured, I am not sure that I would have dug these using F2=4. No way using F2=9.
      Two of the nickels are fairly old for the Denver area, a 1949 and a 1960. Both were 8" deep and sounded very good using F2=0. The big stainless steel ring (+8) and the Avon gold plated junker (+14) were 6" deep and sounded fantastic with F2=0. The two .925 small silver jewelry items (+22) sounded great using F2=0 and were 5" deep.
      So, in higher iron mineralization, are my results an outlier or is using F2 iron bias above zero just too agressive on low and mid conductor non-ferrous targets? Comments, disagreements and Pooh Poohing are welcome.
       

    • By Dan(NM)
      I hunt really trashy parks and hardly ever go after nickels because my time is limited.  I'm going to notch in 12-13 on my next hunt due to amount of wheats and silver I've been taking out of 2 places I've hit this past month. Have you found the Nox the hit nickels in this range at depth, I'm talking 7-9" depth, that's where most of the keepers are being found, thanks.
    • By nwdetectorist
      Blank Sheet for Recording Custom Settings for my Nox 800

      OK, Ok; back in the day of my XLT Spectrum...
      ...I had a notebook full of custom settings for my records.

      Now I can convert (scan and save as) to Word Document or Adobe Acrobat to save and carry with my Smart Phone.

      Problem is, I cannot seem to find a sheet to copy online.
      I know I could create my own, but...

      HELP!
       
      Started a list to see if I have the settings in the right order.
      Does anyone have suggestions and/or corrections for the following list.
      OK; what order for the Equinox Settings Sheet???
      1. What preset program to start with
      2. How many tones; 2, 5, 50
      3. Ground balance setting and/or auto balance
      4. Setup accept/reject notches for your hunt site or hunt style
      5. Select Volume for each tone region
      6. Select Tone Pitch for each tone region
      7. Set tone break, preferably at 1
      8. Set recovery speed for conditions or accept default
      9. Run Noise Cancel
      10. etc. etc. etc.
      what am I forgetting
    • By aerospace guy
      I bought these headphones and used them in the ocean last week in the Kauai (up to my neck).The dealer is always busy or on a trip so I thought I'd throw this out there to get some feedback. I had a few instances where the audio cut out completely and I jiggled the cord and it came back. My question is, should the end of the headphone cord have an o-ring like a lot of my scuba equipment does? The EQ800 still seems to work fine so I don't believe any water made it's way inside detector.
                         As to my success ..well let's just say I understand why my dealer goes to Cancun for his jewelry hunts and not where I went where the waves are 3,4,5 feet. I quickly looked for beaches with "breakwaters" that you can safely take children to and I did find lots of coins and 1 silver diamond ring..but man, it was still 'surgey' as heck and not easy to lift one foot up to push scoop into sand while keeping your balance! Anyone have any experience in using the EQ in the ocean? I saw online sand scoops with a "cross" handle (like on a small shovel) where when you scoop you can keep the scoop from twisting sideways...thoughts..usage?The scoop handle would have to be a "breakdown" type to be able to pack for air travel. The scoop I took has a straight shaft that easily turns sideways when scooping.
    • By schoolofhardNox
      So, my beach season hunting has officially started. I was going to shoot for two days hunting but a wash out on Thursday made me change some plans. I had reserved Thursday for the GPX 6000 and the 14” DD coil, but had to settle for trying the 6000, 5000 and Equinox on Friday. I changed beach locations too and ended up at the less EMI beach for the day. Started out using the GPX 5000 for clearing out some of the recently deposited junk in an area that has produced silver before. I thought the storms that ripped through the previous day would remove some sand, but it was just the opposite…. sand deposited along 3/4 of the beach (top to bottom). Also, high tide reach to the highest point of the beach, so I could only hunt where the waves did not constantly reach up top. The 5000 did well considering the beach was really sanded in and gave me my first silver of the season – a 1955 Washington quarter. The rest was clad, but for 2 copper pennies. Some junk jewelry, and maybe some iron shot or just a ball bearing, - it measured .75 caliber. The big spoon was found at 20” and I thought I was going to get a beer can or some big iron, so that was a nice surprise. Hunted with the 5000 for 6 hours and decided I cleared enough to try the 6000 in that spot. The EMI was a bit more than usual but not really bad. I’m still not sold on that 14” coil. I tried both ground settings, as well as both Salt mode and EMI mode. I tried auto, auto +, manual (full) and manual (setting 1) and some in between. I just could not get the 6000  to not false on the sand. It was partially damp, as high tide receded a while ago, but with a sensitivity of 1, I would have expected a smooth clean machine. IDK maybe the coil is not good. I did not bring the 11” mono as I really wanted to see if the salt mode would work on the 14” DD. Being a bit disappointed, and after trying all combinations of settings, I called it after around 10 minutes. So, the tide was getting as low as it was going to be, so I hunted for 3 hours with the Equinox and traded my spade for my scoop. I didn’t use the Nox much last season as the 5000 was killing the silver, so the Nox sat idle. But I wanted to see if the heavy waves dropped anything on the beach along with all that sand. There weren’t many targets, so I dug everything to get a feel for all the numbers. The hairpins and tiny wire all read a steady -2, -3. The Nox did well for the short time I used it and if I wasn’t beat from the hunt, I would have stayed in the area that was producing some coins. It was the best machine for the day to give me a chance at some gold. It felt really, really good to get out and just walk the beach. Next week all 3 machines will be at the crazy EMI beach. I will have the mono coin and the DD to see if this beach (dry sand) will be ok for the 14” coil. Can’t wait!!!






×
×
  • Create New...