Jump to content
Sign in to follow this  
Mike_P

Shipping Confirmation

Recommended Posts

Thought I would start a thread where everyone can see the progress of the Equinox rollout.

My dealer in SC called today to advise he had tracking info indicating mine would arrive at his shop on Monday the 12th.

I had already planned on being off so I guess a short road trip is in my future. I believe I was number 3 on his list.

I know it will be alot to ask, but please try to keep the posts limited to confirmed delivery information.  That way we can separate out some of the rumor and conjecture.

Thanks,

Edited by Mike_P
  • Like 1

Share this post


Link to post
Share on other sites

Good idea Mike.

My unit is in transit UPS with scheduled delivery date Monday, 12 Feb 2018 to my residence..

Share this post


Link to post
Share on other sites

My dealer said I was number 6 on his list and I won't get my 800 until his second shipment.  I believe he got 3 in the first round.

  • Sad 1

Share this post


Link to post
Share on other sites

Looking forward to all the finds and excitement that will be posted here.

  • Like 1

Share this post


Link to post
Share on other sites

Hey everyone this just to let all of you know that I’m putting myself up for adoption with anyone who is getting their Equinox before I do.

The good side of me and that’s I’m house broke and easy going . Other than that I’m worthless.

Chuck

  • Like 1
  • Haha 2

Share this post


Link to post
Share on other sites

Well none of the top dealers in the USA say anything about arriving shipments. The detectors will be shipped 1st ordered 1st served. The only dealer that has anything even mentioning shipments is BigBoysHobbies and all Bart says is Minelab has begun shipments. All their websites say pre order. 

Cabela's is the largest dealer in the USA and their website says Ships directly from manufacturer.
Please allow 4 to 7 business days for delivery.

I am willing to bet that every dealer in the USA also ships directly from manufacturer.

You get it when you get it.. 

  • Haha 1

Share this post


Link to post
Share on other sites
2 minutes ago, Norm S said:

nah, mine is enroute from distributor to my dealer and then it is coming from him to me. The big issue is most dealers are only receiving 1-2 units. My dealer for instance only received 1.

 

 

Well none of the top dealers in the USA say anything about arriving shipments. The detectors will be shipped 1st ordered 1st served. The only dealer that has anything even mentioning shipments is BigBoysHobbies and all Bart says is Minelab has begun shipments. All their websites say pre order. 

Cabela's is the largest dealer in the USA and their website says Ships directly from manufacturer.
Please allow 4 to 7 business days for delivery.

I am willing to bet that every dealer in the USA also ships directly from manufacturer.

You get it when you get it.. 

 

Share this post


Link to post
Share on other sites

I have seen at least one other dealer post info as far as what they have coming in for Equinox, with arrival dates posted online.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By unearth
      Which end of the Nox is the waterproof end? Is it the coil cable end OR the coil receptacle on the back of the controller? Or, are both waterproof? When I rinse my Nox off after a beach hunt I cover both connectors with my thumb so as not to get the pins or the pin receptacles wet. Does anybody know what the thread count is on the connectors? I would like to get a male and a female solid end so as to rinse the Nox off without any possible water problems.
      Thanks for any info on this matter.
    • By Sasquatch
      Hey just got an Equinox 800 last week, my first detector.  First of all thanks for all the info, it has really helped me figure out this thing!  So far I've only detected around the house and found a wide range of trash: Nails, stakes, nuts, bolts, old chunks of iron, shell casing, a piece of buckshot, molten aluminum nugget from a bonfire, stainless steel wire, tarp grommet, bottle cap, tin can lid.  Nothing amazing but happy with the results, right now I'm digging everything with a consistent signal to learn, figuring out the Target ID and learning the sounds.  Probably a little tough area to start at, but as soon as I figured out the sensitivity and ground balance, the signals are much clearer, I've been impressed how deep it has found some things.  Also suprised I haven't dug any hot rocks yet, there are a lot of rocks in our driveway that are magnetic and I expected to be having to dig a lot more, but so far haven't dug one.
      Thanks again for all the advice on here, excited to go look for some nuggets and lost stuff.  Really happy with the machine, love the wireless headphones!  Seems hard to beat for an "all-around" type machine.
       
    • By unearth
      Went to a local So. Cal. park this morning, and boy what a workout! I'm not sure the Nox is the right machine for a modern trashy park. In some area's of the park the Nox was sounding off like a machine gun. I tried P1, P2, F1, F2, 5 tone, 50 tone, 0 GB, manual GB, auto GB, recovery at 5, 6, 7 and IB at 3, 4, 5. It seems no matter what I tried, I couldn't get the machine to quiet down. It might just be too much trash. I couldn't keep up with the Noxs' noise. I got tired of trying to distinguish good target sounds from bad target sounds, so after two hours my head couldn't take it anymore so I just gave up and headed home. 
      Anybody got any ideas on the best way to handle this type of park? Or, is it best to just pass it by?
      Thanks in advance for any help in this area.
    • By Alluminati
      Here is a easy way to fix your shaft wobble, even if only temporarily. The male end of the middle shaft just needs a single layer of electrical tape.
      The tolerances on the Minelab shaft are actually pretty tight. If it was any closer you might not be able to get it apart again. Anybody who has swung a Tesoro Knows those twist-locks only work for first assembly, lol
      I've done this before with other machines except I used aluminum tape, time will tell how long the electrical tape will hold out. The tape in the picture has about 15 hours on it, so far it's OK. Besides, it's easy to replace.
      Coincidentally when I took the machine apart for a cleaning and to take this picture, I noticed that Minelab made a similar raised surface on the lower fiberglass rod. The lower rod is so long that a little play really wouldn't translate into as much slop as the upper connection does.

    • By sdbirder
      Now that the six-inch coils have hit the streets has anyone heard of an ETA for the Minelab Equinox 15" Double-D Smart Coils? This is what I'm really looking forward to!
      Thanks!
    • By steveg
      Hi all.
      I know I've seen this info before, but I can't seem to find it...
      I currently have an Equinox 800, and am going to buy a 600 as a backup.  I know the 600 has only 4 settings for Iron Bias (instead of 9), and 3 settings for Recovery Speed (instead of 8).  Can anyone remind me what the "equivalents" are between the 600 settings and the 800?

      I THINK I recall that Recovery Speed 1 on the 600 equals 2 on the 800, Speed 2 on the 600 equals 4 on the 800, and speed 3 on the 600 equals 6 on the 800.  Is this correct? 
      Meanwhile, I can't remember how the Iron Bias Settings relate.  I assume 0 on the 600 equals 0 on the 800, and 3 on the 600 equals 9 on the 800?  Would 1 on the 600 equal 3 on the 800, and 2 on the 600 equal 6 on the 800?
      In other words, is this "chart," below, correct?


      Reason I ask is, I know the settings that I prefer on the 800, and I'd like to set the 600 up as close as possible to what I run on the 800.
      Thanks,
      Steve
×