Setting Tone Break Affect Just All Metal Mode ??

[vive equinox]

Hello , i dont understand one thing about the tone break . 

To make it clear I give you an example .

I have gold chain 18k who read 1 in the ID . 

Only park 2 , beach 1 and gold mode detect this chain .

If i put all metal , park 1 and the 2 field mode detect that . 

The problem is if i run in field 2 , i will miss this chain . 

I thought I could solve this problem by adjusting tone break , but when i change the value of tone break from 2 to 0 , i hear a change in all metal but not in normal mode ..

So my question is : Is it possible to configurate the field 2  for that it is able to read and detect the value 0 and 1 in normal mode (no all metal)? 

(I run in 50 tones all the time ) 

 

 

[Dukester]

Field 2 default is set to discriminate out ID's -9 to 2, so I think you need to go to the Accept/Reject setting and use the (-) and/or (+) to navigate to segments 0 and 1 and press the accept/reject button to add those back in to the accepted ID's.

[vive equinox]

Yes ! 

Thank you it 's function , the problem is i dont have the manual in my language ... 

than you

[Northeast]

Good work dukester.