Jump to content

Took My New Nox 800 To The Jungle This Week

Recommended Posts

Just a quick update on the 2 cobs I found with my new Equinox 800 that are photographed earlier in this thread:

The 1/2 real (medio) is most likely a Philip IV (mid 1600s) variety just from the cross but it is so dark I'll need to use electrolysis to confirm. Could also be  Charles II or Philip V era.

I wasn't optimistic that I could get an ID on the cut or broken cob, but it turns out that you can see the assayers mark- the 3 vertical circles to the left of the shield in the photo. It's from the Seville, Spain mint and they don't know the name of the assayer (only his mark) but the consensus is that he worked in the 1520s. Probably one of the first cobs dropped in this area of the Americas. This is pre-Peru and no American mints were even open yet! Not too bad for my first week with the Equinox.

  • Like 4

Share this post

Link to post
Share on other sites

Find some more!!!! Look forward to more pictures.

  • Like 1

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Bob'ke
      Hi All,
      As I looked on the website of my french md-dealer I saw an adapter to fold the grip/pod of the EQX into the armcuff. Not for me, but maybe something of interest to some of you who like to take your EQX travelling in a small case...
      FYI:  Here's the link: http://www.shop-lefouilleur.com/v2/fr/nouveautes/842-bascule-poignee-equinox-7861560031186.html
      € 39 = us$ 43,80
    • By midalake
      There is a thread on "other sites' asking about recovery speed and depth? With SALT WATER. The only question was do you loose depth, in a higher recovery?  I would say with the NOX at 6 there is a balance with quiet running and depth in salt water.[esp with black sand]  With a machine like the Sovereign in all metal Pinpoint mode it is doubtful you can overswing or swing this too fast on ANY salt beach. Yesterdays take with the sovereign in all metal pinpoint [for those who never had a 186 coin day]. [347 pesos] 

    • By Xergix
      Is it better to do manual balancing or autotracking in salt water? On dry sand I have not found great differences, but in sea water the doubt remains, it would seem that autotracking tends to eliminate weak signals, according to you which is the best solution?
    • By Gerry in Idaho
      I hunted a 20' x 30' site 5 years ago using CTX-3030 with small 6" coil and pulled 2 Barber Quarters,  1 Seated Liberty Quarter,  and 2 Barber Dimes. 
      I hunted the exact same 20x30 spot 2 days ago with EQ-800 and stock coil, as Lunk had my 6 sniffer.  Here is what the $2500 CTX-3030 missed. 
      1903 V Nickel,  1883 Indian Head Cent,  1897 Barber Dime and 2 early Wheat Cents I didn't take pics.
      The only thing I can contribute is the Multi IQ Technology and faster recovery of Equinox is superior for this type of site, high iron trash content. 

    • By Mark Gillespie
      Extreme enjoyment. 
      This might not seem like much but this small school (built in the late 30’s) has been hunted for over 10 years.  With machines like the:
      Tesoro Tejon
      Garrett AT Pro
      White’s DFX, V3i
      Fisher F75 and LTD
      Minelab Etrac, and CTX 3030
      And now the Equinox 800
      Countless hours hunting from three guys including myself.  Now I will say we’ve found some nice stuff from this site over the past 10 years and we all thought it was cleaned out but surprise, it’s not, yea I know they never are.  But I was not expecting this many nickels and some over 6” deep.  Then the silver nickel at maybe 5” and tilted to maybe a 45 degree angle.  
      I will say this machine has a very good audio response but one has to listen and learn.  I did the usual noise cancel and started off with park 1.  I wasn’t really happy so I tried each of the park/field programs and ended back with park 1 with one change, I set the iron bias to 0.  It didn’t take long and I knew this was the settings for the day.  Numerous times I tried park 2 and the two field programs but it seemed like park 1 was the very best at both a good audio and stable ID on located buried targets.  After a while I started wondering why these targets had been missed.  Taking my time, I stared rotating around each target and I was quite amazed at how stable the audio/ID was.  These were absolutely dig, dig signals, no doubts about it, with the exception of the silver nickel.  If the silver had not given a double beep I might have walked away but I’m glad I didn’t.  Well, toward the end of the hunt I purposely moved to the trashy area of the school and wow this machine, even with the 11” coil separates very well.  I might add, the old Minelab wiggle I used with the Etac and explorer works with the Equinox too.  Found a somewhat nice signal that I thought might be a nickel.  Did the wiggle and marked the spot.  Called my buddy over to check the spot.  He gave no indication it could be a good target but at 5” comes another nickel (gave a solid ID of 13) and surrounded by heavy trash.   Well, we had to leave and to be honest I felt sorry for him because he had not dug anything but trash.  Now I’m beginning to wonder if I should buy the 6” coil and hit the trash again.
      Extremely satisfied  user

    • By Andy Sabisch
      Wanted to see who was using the Equinox for prospecting and if you are, woudl you be willing to share settings and some find photos for the new Equinox Handbook that is getting ready to ship to the printer . . . will send a copy of the book when they come in if we can use them in the book.
      Send prospecting find photos or settings to asabisch@att.net
      Thanks in advance,,
      Andy Sabisch
  • Create New...