Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By PhaseTech
      Just curious, how many prospectors are still swinging around a Minelab SD series, GP or even GPX4000??
      These models hardly get a mention these days. 
      For those that are swinging these older models, here's a few additional questions do get a bit of chatter happening....maybe
      Have you tried any of the new flat/spiral wound coils? 
      Have you tried modern boosters, or aftermarket battery options? 
      On a personal note, I still have a SD2100e and a GP3500 but they don't get any serious use. The 2100 is very sentimental model to me as it was the detector I found my first nugget with. The GP3500 was my baby, where Minelab added everything I wished for. It still has the best audio in any prospecting detector I've used to date (admittedly she's a bit on the quiet side). 
    • By Tnsharpshooter
      I’ll post link here.  Folks can comment if they wish.  Saves me time by not posting in detail on all forums.  I like this forum very much.  Hope I am not breaking rules here or am not upsetting anyone.
    • By Ridge Runner
      I have the Simplex + and thinking about buying the Vanquish 540 but do I really need to spend over the cost of the Vanquish to get a great detector?
       I’ve had and have higher cost detectors but I want your opinion .
    • By Steve Herschbach
      Here is a good Sunday read for you. Reg wrote what is still the best introductory text on PI detectors. Recently he added extra chapters at the Findmall forum. Even if you read the original before it is worth reading again.
      Understanding The PI Metal Detector by Reg Sniff
      Deepest PI Detector by Reg Sniff
      Part One Link deleted since Findmall update broke old links
      Deepest PI Detector by Reg Sniff
      Part Two Link deleted since Findmall update broke old links
    • By Steve Herschbach
    • By Steve Herschbach
      Which metal detectors have the most reliable target ID numbers?
      Target ID is a function of depth - the deeper the target, the more difficult it is to get a clean target ID as the ground signal interferes. Other items directly adjacent to the desired target can also cause inaccurate numbers. The more conductive the item, the higher the resulting ID number, but also the larger the item the higher the number. Silver is more conductive than gold, so a gold item will give a lower number than the same size silver item. But a very large gold item can give a higher number than a small silver item, so numbers do not identify types of metal. Gold and aluminum read the same and vary in size so to dig one you dig the other. Only mass produced items like coins produce numbers that are more or less the same over the years but a zinc penny will read lower than a copper penny due to the change in composition.
      In general iron or ferrous targets produce negative numbers or low numbers. Aluminum, gold, and US nickels produce mid-range numbers. And most other US coins produce high numbers. Other countries coins, like Canadian coins with ferrous content, can read all over the place.
      The scale applied varies according to manufacturer so the number produced by each detector will vary according to the scale used. The 0-100 range for non-ferrous targets is most common but there are others. Minelab employs a dual number system on a 2D scale with thousands of possible numbers, but they are now normalizing the results produced to conform more closely to the linear scale used by other manufacturers.

      White's Visual Discrimination Identification (VDI) Scale
      Increasing ground mineralization has a huge effect on the ability to get a good target ID. Ground mineralization is nearly always from iron mineralization, and this tends to make weak targets, whether very small targets or very deep targets, misidentify. The target numbers get dragged lower, and many non-ferrous targets will eventually be identified as iron if buried deep enough. Small non-ferrous readings and iron readings actually overlap. That is why any discrimination at all is particularly risky for gold nugget hunters.
      If you want target ID numbers to settle down, lower sensitivity and practice consistent coil control. The target number will often vary depending on how well the target is centered and how fast the coil moves.
      Higher sensitivity settings lead to jumpier numbers as the detectors become less stable at higher levels. The interference from the ground signal increases and interference from outside electrical sources also increases, leading to less stable numbers.
      Higher frequency detectors are inherently more sensitive and are jumpier. So lean lower frequency for more solid results. Multi frequency detectors act like low frequency detectors and tend to have more solid target numbers due to the ability to analyze a target with different frequencies.
      Another issue is the number of target categories, or ID segments, or VDIs, or notches, or bins (all names for the same thing) that a detector offers.
      For instance here are the number of possible target id categories or segments each detector below offers:
      Fisher CZ-3D = 7
      Garrett Ace 250 = 12
      Minelab X-Terra 305 = 12
      Minelab X-Terra 505 = 19
      Minelab X-Terra 705 = 28
      Minelab Equinox = 50
      Fisher F75 (and many other models) = 99
      White's MXT (and many other models) = 190
      Minelab CTX 3030 = 1750
      Fewer target categories means more possible items get lumped together under a single reading, but that the reading is more stable. Many detectors will tell you the difference between a dime and a quarter. The Fisher CZ assumes you want to dig both so puts them under one segment along with most other coins.
      People who use detectors with many target numbers usually just watch the numbers jump around and mentally average the results. Some high end detectors can actually do this averaging for you! But I think there is something to be said for owning a detector that simplifies things and offers less possible numbers to start with. The old Fisher CZ method still appeals to me, especially for coin detecting. So do detectors like the Garrett Ace 250 or Minelab X-Terra 505 for the same reason.
      The problem is that as people strive to dig deeper targets or smaller targets the numbers will always get less reliable. But if you want to have a quiet performing metal detecting with solid, reliable target numbers look more for coin type detectors running at lower frequencies under 10 kHz or at multiple frequencies and possibly consider getting a detector with fewer possible target segments. And with any detector no matter what just back that sensitivity setting off and you will get more reliable target numbers.
      ads by Amazon...
      Detectors often use tones to identify targets and often use far fewer tones than indicated by the possible visual target id numbers. The X-Terra 705 for instance can use 28 tones, one for each segment. However, most people find this too busy, and so simple tone schemes of two, three, or four tones may be selected. I think it is instructive that many people often end up ignoring screen readings and hunting by ear, using just a few tones. This ends up just being an ultra basic target id system much like the simpler units offer. Reality is that most people do not need or care about huge numbers of target numbers. For many just three ranges suffice, low tone for iron, mid tone for most gold items, and high tone for most US coins. The meter could do the same thing, but for marketing purposes more is better and so we get sold on detectors with hundreds of possible target ID numbers. Perhaps this is a digital representation of an old analog meter with its nearly infinite range of response but the reality is we do not need that level of differentiation to make a simple dig or no dig decision.
      Finally, a picture often says it all. Below we have a shot of the White's M6 meter. I like it because the decal below illustrates a lot. You see the possible numerical range of -95 to 95 laid out in the middle. Over it is the simplified iron/gold/silver range. Note the slants where they overlap to indicate the readings really do overlap. Then you get the probable target icons. -95 is noted as "hot rock" because many do read there.

      The M6 can generate 7 tones depending on the target category. I have added red lines to the image to show where these tones sit in relation to the scale. It breaks down as follows:
      -95 = 57 Hz (Very Low) Hot Rock
      -94 to -6 = 128 Hz (Low) Iron Junk
      -5 to 7 = 145 Hz (Med Low) Gold Earrings, Chains - Foil
      8 to 26 = 182 Hz (Medium) Women's Gold Rings/Nickel - Small Pull Tabs
      27 to 49 = 259 Hz (Med Hi) Men's Gold Rings - Large Pull Tabs
      50 to 70 = 411 Hz (High) Zinc Penny/Indian Head Penny - Screw Caps
      71 to 95 = 900 Hz (Very High) Copper Penny/Dime/Quarter/Dollar
      Note that the screen reading of +14 is noted as being a nickel or ring but it can also be the "beaver tail" part of an aluminum pull tab or the aluminum ring that holds an eraser on a pencil, among other things.
      The best book ever written on the subject of discrimination is "Taking A Closer Look At Metal Detector Discrimination" by Robert C. Brockett. It is out of print but if you find a copy grab it, assuming the topic interests you.
      Always remember - when in doubt, dig it out! Your eyes are the best target ID method available.

  • Create New...