Jump to content
Sign in to follow this  
Nuke em

Terra Beach Finds 18-07-18

Recommended Posts

This morning i took my Terra and Nox to the beach at 7am hoping that either i would find a ton of coinage or a ring with the Nox on the lower beach .

As it turned out i didn't use the Nox as the Terra was enough . I was hoping to have a go in an enclosure with a large screen that was put in place for the World Cup but that was not available today , not sure when it will be but will check again . Over around 3 hours i found a 1 Euro coin and 2 other foreign coins , a junk ring and £16,38p and a fishing weight and a toy car . 

Tomorrow i will take only the Terra and have a go in the enclosure if i can , that might turn out to be my best score this year so far but it will also give me a chance to see if the cashless society is as bad as i think it is . A few years ago i found £157.99p and a Gold ring in 4 hours . Wont do that but it should be fun trying .

55) £16.38p FOUND 18-07-18 XT.JPG

  • Like 2

Share this post


Link to post
Share on other sites

This is the score that i got in an enclosure in 2014 on 14 - 07 - 2014 , i think that was the World cup too but not sure.

The 4 rows of Copper/ Nickel coins are the old Pound coins of the time .

 

61) £157.99p AND GOLD RING FOUND 14-07-14 ET.JPG

  • Like 3

Share this post


Link to post
Share on other sites

Went back today from 7am till 4.30pm . 

The cashless society is certainly taking hold but I didn't do to badly. 

Report to follow when I get home, stuck in traffic in the rush hour.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Steve Herschbach
      Published on Jan 12, 2019 by Gaptain's Metal Detecting Vlog
       
    • By afreakofnature
      Hello all!
      One thing that I have not seen or heard since the Nox has been out is what people are finding for Spanish treasure and relics with the Equinox out on the FL Treasure Coast.  Of course ever since the Nox has been out there has not really been any storms to get some good beach erosion going on.  Out of curiosity, what settings and mode are folks using for the relic/treasure hunt on the treasure coast beaches, including the iron settings.  Can't wait to hear the answers!  I plan on being down there for a couple weeks in Feb and if the weather gives some good erosion I'm gonna be out there with the 15' coil swinging away!
      But even if the weather doesn't "cooperate" I'll still be looking for that modern bling in the Beach modes.  I think I have to be the only person that goes on a FL vacation that hopes for a NorEaster  
    • By Steve Herschbach
      I am an avid metal detector user and I like always being at it. Just because there is no gold prospecting for me in a given time frame is no reason to not go metal detecting for gold. There are a lot more ways to find gold than prospecting, and so jewelry detecting is very high on my list. If you like finding a gold nugget, I do not see how you could not also be excited about digging up a gold ring.

      Jewelry detecting and nugget detecting share many common traits, not least being the hunt for gold. Both also require a high tolerance for digging trash items, and both are best done with detectors made for the purpose. It just so happens that the detectors best used for nugget detecting are often the best to use for jewelry detecting.

      In other words, a lot of you guys are already outfitted for this!

      There are two general ways to hunt for jewelry - on dry land, or in and around water. Let's leave the dry land for another article and focus on the water detecting for now, since I am gearing up for a water hunt myself right now.

      Almost any detector, with the remarkable exception of the most expensive one you can buy, comes with waterproof coils and can be submerged to the control box. Minelab PI stock coils are not warranted waterproof but only water resistant so it takes aftermarket coils to get them up to speed. But they are a poor choice for wading as there is probably no machine I would like dropping in the water less than a Minelab GPX 5000 with high amp battery attached.

      Detectors that can be hip or chest mounted offer even more flexibility for wading applications. Few nugget detectors are fully submersible, but there are some, most notably the Garrett AT Gold, Infinium and ATX, all waterproof models. Jan 2019 note: see also Makro Gold Kruzer and Equinox 800.

      Water detecting can be broken down into fresh water and salt water detecting. Fresh water detecting is pretty straight forward since fresh water is invisible to your detector. The tuning and operation of the detector is similar to what you do on dry land. All you have to worry about is keeping the electronics dry, and recovering targets underwater. Fresh water swimming holes are great for jewelry detecting, and there are many fresh water stream and river opportunities for gold prospectors. Any good gold prospecting detector also works well for freshwater beach hunting. The Garrett AT Gold has an obvious edge for being waterproof. The Tesoro Lobo gets special mention for being convertible to hip or chest mount.

      In fresh water VLF detectors usually have an edge due to large amounts of trash often being present but PI detectors do have their place in fresh water detecting. The only way to know is to just give it a go and see how much trash there is. The nice thing about beaches though is the digging is easy compared to what nugget hunters often face.

      Salt water adds a whole new dimension. Salt water is conductive, and therefore a hot metal detector can actually get a signal from salt water or wet salt sand. Many prospectors already know the issues surrounding salt and alkali flats. Detectors that are used in salt water need some way to tune out the salt signal. The problem is even worse on beaches that have mineral content, classic black sand beaches. A white beach composed of broken down coral and shells is no problem at all, but add volcanic material and the issues compound. Most prospectors would not be surprised to hear that pulse induction (PI) detectors have an edge in dealing with salt water scenarios.

      There is an unsolvable conundrum however. The signal for salt water and small gold items, like post earrings or thin gold chains, actually overlaps. When you tune out the salt water, you tune out these items also. There is no solution to this problem with existing metal detectors because of the way they work. It is possible to find these items at the beach using a hot detector, like a White’s Goldmaster or Fisher Gold Bug 2, but you must be on bone dry sand. Any attempt to get near wet salt sand with these units will result in the sand acting like one giant target.

      Most mid-frequency gold machines handle salt water beaches to varying degrees. They will generally have no problem until you get on sand currently seeing wave action or actually in the water. The higher the frequency, the less able to handle wet salt sand. The Fisher Gold Bug Pro at 19 kHz and Garrett AT Gold at 18 kHz are not happy on wet salt sand. They can be made to function but only by losing a lot of depth. The Tesoro Lobo has an alkali setting and White’s MX Sport a salt setting specifically designed to handle wet salt sand. In general though these detectors will all work better higher on the beach and have an edge on small rings, earrings, and chains that other beach hunting machines tend to miss.

      The Minelab Eureka Gold and X-Terra 705 have low frequency options that make them well suited for beach hunting. The Eureka can be hip or chest mounted, but be aware the stock coil is another that Minelab does not warranty as waterproof.

      The PI detectors fare better, the Garrett Infinium and new ATX having an edge again for being waterproof designs. The White’s TDI and Minelab series do well but must be kept dry. The TDI models except the TDI SL have an advantage in being convertible to hip or chest mount. Be aware that turning off or not using a ground balance system can often add extra depth with a PI on white sand beaches. The TDI and GPX 5000 can turn off the ground balance setting, and the factory default on the ATX before ground balancing offer possibilities on low mineral beaches. For 2019 see the new White's TDI BeachHunter.
      For serious salt water beach detecting hunters turn to detectors not normally used for prospecting. Ironically, this is because the general lack of sensitivity that makes prospectors eschew these models makes them ideal for salt water. Multi-frequency VLF detectors are not very good prospecting machines but they excel in salt water. Two detectors that vie neck and neck in the salt water VLF market are the Fisher CZ-21 and Minelab Excalibur. On the PI side the Garrett Sea Hunter, Tesoro Sand Shark and White’s Surf PI are the three popular models.
       
      Minelab Excalibur II waterproof metal detector
      There are lots of options but if you ever want a specialized waterproof detector for both fresh and salt water and want to make a safe choice, get a Minelab Excalibur. It is probably the most popular water detector made and for good reason. It gets the job done with minimum fuss and will work well anywhere.

      I am a PI guy myself however. I have used the Garrett Infinium extensively trying to deal with salt water and volcanic sand and hot rock conditions in Hawaii. I have had success with the model but it is difficult to deal with, suffering from an inability to ground balance into the salt range and susceptibility to EMI interference. Huge numbers of posts exist on how to try and get an Infinium to behave in salt water. The new ATX has taken steps to address these issues but the jury is out there yet. I will be giving the ATX a good go in Hawaii soon. My latest water detector is a White's Surf PI Dual Field to back up the ATX. I have had good luck in the past with the White's Surf PI models and recommend them for people interested in a waterproof beach PI. Again, a simple unit that gets the job done, and at a bargain price.

      Where to hunt can fill a book, but really boils down to two things. The first is that the best finds will be made where people who wear quality jewelry congregate and engage in some kind of physical activity. On fresh water beaches where items get dropped is generally where they stay. The second item comes into play more often on salt water beaches. The waves and seasons concentrate items on layers, much like placer deposits. They sometimes bury the items too deep to find, and at other times expose them for easy recovery.

      Beach watching can teach you a lot. There is the towel line, where people set up shop for the day. Lots of items get lost here. Then there are the places where people tend to play beach sports, like Frisbee or volleyball. Best of all, are areas in the water where people congregate, with areas where people can actually stand on the bottom being best.

      Items dropped in sand obviously sink over time, but hard sand will resist this longest and keep the targets close to the surface longer. Extremely soft sand swallows items quickly and is not a good place to hunt. Areas where the sand tapers into a hard rock or coral bottom can be very good when the overlying sand is shallow enough to reach that hard layer with a detector.

      Beach detecting is very popular, but beach hunters have on tremendous advantage over prospectors. The finds are being constantly replenished. There is no beach, no matter how heavily hunted, that does not have the potential for finds. The more activity there is the more items are lost in a given period of time. The finds made by beach hunters can rival the best made by prospectors, as not many gold nuggets come with diamonds attached.

      I know for many prospectors it is about getting out into the middle of nowhere and away from the crowds. Beach hunting is not for everyone. But you can hunt early in the morning or even on rainy days, when people are few and far between. As more and more areas accessible to prospectors get hunted out, it is possible other places are near to you where gold may be easier to find. If you have a detector already you certainly have nothing to lose by giving it a go. Hopefully this post has at least made you consider the possibility. As always, volumes more information can be found just by Googling “beach detecting forum”.

      Here is an example of a hunt at White's Surf PI Pro and Platinum Rings in Hawaii I got four platinum and three gold rings over a couple week period. One of the gold rings is white gold so it looks like only two gold. All fairly plain men's bands reflecting the rough surf area I was hunting. There is a picture of everything I dug at the link including the junk. All the platinum I have ever found was rings, and when platinum peaked at over $2000 an ounce I cashed in over two ounces of platinum.

      Another very successful hunt was Detecting Gold in Hawaii with the Garrett Infinium Please note that unlike my prospecting outings I do not spend every hour of every day in Hawaii detecting. These finds are being made hunting on an average of two or three hours a day. I am not one to just sit around so detecting keeps me busy. And a good vacation can be paid for in finds or at least subsidized with some hard work and a little bit of luck.
      Waterproof VLF Detector Comparison Guide

      Some gold and platinum finds made by Steve in Hawaii
       
    • By Voyager32
      I’m considering buying an Anfibio multi and am wondering about it’s abilities in and around saltwater, I know it has a beach mode but do you have to lower the sensitivity much to get it stable? I have an Equinox 600 and it’s a great machine except I live in Canada and find it frustrating on our clad coins, I’ve heard the Anfibio does well on it, the 600 is great in many ways but my buddy finds way more clad with his AT gold but can’t go near the salt, I have used the 600  snorkeling and would also dive with the Anfibio, the fact that it is rated deeper is a bonus along with the collapsible shaft. Anybody have experience with one.
    • By Sinclair
      Hi folks,
      I've been a die-hard Equinox 800 user since april 2018. Now I've got enough clad together to buy another detector, or upgrade my homecinema
      Does anyone use the deus on the dry sand beach? I love my Equinox, but my right hand is not the most healthy, so weight and balance counts alot for me. Also the Equinox puts many stuff found on my beaches in a very narrow ID range.
      Will XP ever come out with a multi-frequency? At the moment I would opt for the 11" X35 coil with RC and WS5. Weight wise the XP in this configuration is about 1000g with remote vs 1300g for the Equinox - that's quite a difference. I also like the portability - you can easily put it in a backpack. What I don't like: No bluetooth, expensive headphones needed, even when you buy the RC (if you don't want to mess with additional tranceivers etc. for wireless freedom).
      If I ever get my permission to detect fields, the deus would be handy, for sure - but at the moment I am only allowed to detect our beaches. I'll keep the Equinox anyhow.
      Suggestions? Or should I just buy a new projector for my homecinema?
    • By schoolofhardNox
      Last week I visited my favorite gold beach and hit an area at the end of the day that produced 5 silvers, a couple of war nickels and 8 wheat pennies. Much better than the limited amount of clad I found the first part of that day. It was posted in the Equinox forum under Equinox and EMI. Today I hit that same area with the GPX instead. Being a holiday, I figured there would be limited train runs, and for most of the day that was the case. I ran the GPX as hot as I could handle and put on the 12 1/2" DD coil to get the most depth I could get. It worked! Had a great hunt. Some oddities for the day included a nice old Ford key, a twisty tie (bread tie) that fooled me for a bit, as it is the brightest gold foil that I have ever seen. Thought I had a gold chain  But the oddest thing I found (or actually re-found) was a deep (18+ " ) remains of a Pringles potato chip can. I found it a while back and the chips still looked like the day they were made. I never took a picture of them and left most of the remainder of the can and chips in the hole. Well, today I came across it again and took them home. Unbelievable what they label as food these days! As for the goods, I found 21 Wheats (one wrapped in red cloth from a change purse?), a bunch of silver coins including some war nickels and a W/L half. The best find of the day was the unmarked gold ring. Gold beach gave me some yellow today!  As for depth on the coins?  Nothing was shallower than 9-10" And 2 of the Mercs came in as a repeatable ground mineral signal. If you use a GPX you will know what faint ground variations sound like, I dug a lot of those today and most disappeared when you took some sand of the top. But 2 of them got louder and I knew I had a small fringe target. What I was surprised at was, that both of those dimes came in at a measured 18". I used a pin pointer to locate them and dug the last inch by hand. I wanted to make sure I did not drop the target back into the hole while digging deeper. I needed to see just how deep this machine can go with no EMI present.  I am still in awe of how good that GPX 5000 is. So, a great start to the New Year and hopefully I can count on the GPX/Equinox combination to handle any beach conditions I come across.





×