NSC Posted July 19, 2018 Share Posted July 19, 2018 Hi from cold & wet Downunder ☺️, I recently picked up this little coil and did some air tests on the my back lawn. I was impressed with its depth on our standard $2 coin - about 9 or 10 inches But what impressed me more was what I was hoping for...its sensitivity to tiny native gold It picks up my smallest gold specimen - a wee little smear of thin gold on a tiny piece of rock (on the right in the pic) ...the 11" Coil could not hear this piece at all and I thought the 6"" wouldnt either so I was quite surprised Air Test : 6" coil gets 6-7 inches on a 0.8gram piece (in the perpex case in the pic) I get the clearest, most definite signal with both 6"" & 11""coils in Gold 1 I have had the Eq800 & its11" coil onto one of our local goldfields once and only managed buckshot, .22 bullets etc but this little guy seems like it has better depth on small stuff and should cope quite well with the mineralised goldfields. ? The photo has a US 1c , a Euro 10c and a 5c AUD happy hunting 3 Link to comment Share on other sites More sharing options...
mn90403 Posted July 19, 2018 Share Posted July 19, 2018 Thanks for the report. I have one on its way to me. Mitchel 1 Link to comment Share on other sites More sharing options...
Buzzard Posted July 20, 2018 Share Posted July 20, 2018 Looks like I will have my 6 inch coil today so I am planning to go to Gold Basin AZ and hunt in the morning...we will see how it goes. 1 Link to comment Share on other sites More sharing options...
mn90403 Posted July 22, 2018 Share Posted July 22, 2018 It IS good for prospecting and a lot more. Mitchel Link to comment Share on other sites More sharing options...
SteveJJ Posted July 25, 2018 Share Posted July 25, 2018 I'm curious to hear how it stacks up against GoldMonster, or if it's even close. Link to comment Share on other sites More sharing options...
PG-Prospecting Posted July 25, 2018 Share Posted July 25, 2018 Ive done a few basic air tests and it seems to be a little less sensitive to small gold when compared with the gm1000. Gm1000 was in auto 1 all metal. nox800 was gold mode 1, sensitivity at 16, since thats what ive been having to run it at in my area. May be able to increase it since the smaller coil should see less ground. Surprisingly i didn't see much of difference in depth when toggling between all metal and discriminate. The nox was seeing at 2 grain piece of gold about a half inch to an inch behind the the gm1000 with its 5 inch coil. I plan on doing more testing this weekend. Could be a different story out in the field. 1 Link to comment Share on other sites More sharing options...
Chase Goldman Posted July 26, 2018 Share Posted July 26, 2018 I have noticed that Segment 1 (ferrous) discrimination has little to no effect on non-ferrous target depth unlike the discrimination circuit in other machines such as the Deus. It almost behaves like an audio notch vs. a disc circuit in terms of its transparency to the non-ferrous target segments. Link to comment Share on other sites More sharing options...
Dig It Posted July 26, 2018 Share Posted July 26, 2018 Anybody know of a dealer here in the states that has the 6" coil in stock ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now