Jump to content
Nokta Detectors

The New Anfibio / Kruzer 9'' And 13'' Coils

Recommended Posts

That 9" concentric (?) looks almost identical to the old 8" Fisher concentric that came with the CZ's, C$, etc. back in the day.

Share this post


Link to post
Share on other sites

Hoping Dilek is listening ...........

Is there a timeframe for availability of the new coils????

Want to give the 13" a try

Share this post


Link to post
Share on other sites

Hello guys...sorry I am responding late..was in the US for 10 days and I am in Mexico now. All coils have been available with the release of the detector. 

  • Like 1

Share this post


Link to post
Share on other sites
On 9/20/2018 at 7:51 PM, Cal_Cobra said:

Dilek is the new 9" coil a concentric? 

Cal_Cobra: I know that you really like the Multi-Kruzer. Looking at this new one do you think it might be better for relic hunting? I hope that you get one to let us know. I have read some of your posts on the MMK and it sure has me wondering as I use the Deus for relic and love it but if the MMK or this one is better I might have to give one of them a try. I thought of getting the MMK but I now have to wait to see if the new one is better. Thanks

Share this post


Link to post
Share on other sites
7 hours ago, martygene said:

Cal_Cobra: I know that you really like the Multi-Kruzer. Looking at this new one do you think it might be better for relic hunting? I hope that you get one to let us know. I have read some of your posts on the MMK and it sure has me wondering as I use the Deus for relic and love it but if the MMK or this one is better I might have to give one of them a try. I thought of getting the MMK but I now have to wait to see if the new one is better. Thanks

Hi Marty,

I wish I could answer your question, but I have no experience with the Anfibio.   Had Nokta sent me one to test, I'd happily put it through it's paces and been able to answer your question.  That said, the MMK is by far the best detector I've used for relic hunting in heavy iron, or sea of nail environments (amazing what it can do with the stock coil).   What I can tell you is that since using the Red Racer, Racer 2, Impact, and now the MMK, with each progression of detector, they've all been improvements of their predecessors.  I'd expect that the Anfibio has some improvements over the MMK, but again without testing one, I couldn't say what.  It could simply be that they took the user feedback from the MMK and incorporated that into the Anfibio.  Things like the lighted keys, but I see they did not incorporate tactile reverse divots on the keys so one can use the PP and GB buttons without looking at the buttons.  This may seem trivial, but it slows you down, and at the end of the day, wasted time hunting for buttons means less finds in your pouch.  From preliminary reading the main two improvements that stand out are the lighted keys and the new coils (which also work on the MMK).

Wish I had more to share.
Cal

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Smithobx
      I have had my 800 since the end of April. I have to admit I was a little skeptical of all the hype but after using it a lot I the last 3 months or so , I am very impressed. This past Friday I was at a new site and when I picked up the detector to take it out of the truck the coil fell off. Both the mounting tabs were broken. I am pretty particular with my equipment so I really don’t think it was anything I did. I emailed the repair center and has been my experience in the past, they were prompt in their response and had shipping instructions to me that same day. They said the coil would be replaced under warranty but would take a few days because the service center had run out of coils and they were currently on backorder. This leads me to believe their must be a lot of people who have had the same issue. It will be interesting to see if this new batch of coils has beefed up the mounting tabs. They really are kind of flimsy when compared to the Explorer series of coils. I don’t mind the wait, it gives me a chance to get to know my 6 in.  coil. 
    • By kac
      I swapped out my Nel Big coil on my AT Pro and put the stock coil on and just for kicks I did a quick air test to see if there was any difference and I found that the targets now hit 15-20% further away ie dime at 10 inch instead of 8.
      For those that don't have Garrett machines and a 3rd party coil, the procedure when changing coil Garrett says to do a factory reset of the machine.
      So if anyone knows, does using a large coil setting on a stock coil essentially do a tx boost?
      Do other machines require factory reset after changing coils?
    • By Jim in Idaho
      Finally got to work on testing the 7 1/2DF,  8x6 Sadie, MJ 8x12, and 12"DF. Did a comparison on the 7 1/2DF and Sadie with both battery packs, and a comparison of the MJ 8x12 FM, and the Whites 12"DF at 16v.
      EDIT: I notice I cut off the early portion of the Miner John comparison. Hope you get enough of the sensitivity of that coil. It works very well on my SL.
      Jim
    • By kac
      I have 2 coils on my Tejon. 8x9 conentric I use in high trash areas and parks (same thing) and a 10x12 i use for woods and fields.
      I got lazy and left the widescan on and hit a local park and came across bottle cap after bottle cap and could not find a good tone break to cut them out without losing too much range.
      I saved a couple and tucked them in my back yard 6" down and did a quick test. I set my 2nd discrim for break on the widescan and the primary for the concentric  and there is a huge jump between them.  Both discrim match up on other items such as coins and rings, pull tabs.
      Note that both coils actually ground balance the same and the widescan can pick up the tiniest pieces of lead and foil. I have found lead pellets from a pellet gun 4-6" down with it. I can also place a cast iron hammer head half over a dime and still hear just the dime though broken signal It's there. So I am really stumped on the bottle caps. Maybe someone here knows why.

    • By karelian
      I did a coil test some time ago using a Tdi Pro OZ, quite a variety of coils involved. Just a bit of information not wanting it to go to waste.
      The test area was located in the middle of the Golden Triangle in Victoria, Australia. Looking at the images the test site is located on a area that produced large nuggets. Heavily mineralized to give the depth tests some authenticity. Targets were varied as were the coils tested. The Tdi Pro was ground balanced, gain was at 5, conductivity was in ALL, pulse delay was 10. Frequency was set in the middle and the audio was boosted by a Nokia MD-11 external speaker. Only clear repeatable signals were recorded.
      All targets were buried in the ground sideway from a miners hole, so as not disturb the soil on the surface or above the target. Only the 1 grain ingot and one 0.5 gram gold coin were buried from the surface disturbing the ground.
      Not sure how useful this is for Tdi SL users, deduct 10% maybe.. Just gives a sense of what is realistic is this one location at that one time with the Pro with the variety of coils available back then.
      All the best, Karelian



    • By PG-Prospecting
      I know everyone probably gets sick of coil questions, but i have another.  
      So the area i have been detecting and finding nuggets in VA was found back in about 2011 by some friends of mine.  They hit it hard for a few years till it got to thick to hunt.  One of the patches they found at this place was 100s of yards from all other gold finds, and was initially found with a 9X12 nugget finder coil, when they found a 1.5 ounce nugget.  The next trip out they used a NF 24X12 coil and found, i think a 3/4 ounce, an ounce piece and hold your breath a 7 ounce lunker at about 30 inches down.  
      But to my surprise that NF24x12 is the biggest coil they used.  He has owned a 18inch and 24 inch mono coil as well but never really used them at this site due to EMI issues.  
      Now my understanding is, that a 14 inch round should out punch the NF 24X12 on large targets at depth, and that Detech coils seem to generally less affect by EMI when compared to NF and coiltek coils.  However would a 14inch DD coil out punch a 24X12 mono?  Please correct me if im wrong.  
      So the question is, is a 14 inch detech mono going to be a better option, or detechs new 15 inch Ultimate DD coil.  Which would punch the deepest in fairly hot ground, with a good bit of EMI flying around.  
      Lots of questions as i learn more about the site im detecting. 
       
      Thanks guys, 
×
×
  • Create New...