Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Old Farm Hunter
      Has anyone ever made a homemade shaft for a metal detector with PVC pipe ?
      I think im gonna try it ill keep you informed on how it goes
    • By flakmagnet
      Since people are chatting up new stems, I would like to recommend a three piece telescoping replacement for the stock Equinox stem. I received it today and love it. It is super lightweight, simple to assemble (I did it so it's simple), it obviously has had a lot of thought put into it. I don't make a habit of putting up ad's for equipment unless I am pretty sure they are first rate and I believe this shaft meets that standard. 
      I took a couple of quick shots of it after I closed it up to it's shortest length. They also included a nice cover for the Eq. control box which I also have shown.
      Take a look at their website and see what you think
      https://www.detecting-innovations.co.uk/TELE-KNOX_Detecting-Innovations_Telescopic_Stem/p6292256_19741720.aspx
       



    • By eagleseye
      Hello everybody,
      can I use the Golden Mask Shaft (converted for the Equinox) in salt water?
      Are there metallic parts that will be corroded / oxidized by being submerged in ocean/sea ?
      Thanks
      Editor's Note - this thread was split from an older existing thread about the Golden Mask aftermarket rod

    • By Condor
      I really needed the Equinox on a collapsible shaft so that I can put it in my backpack or stow it on the Rokon for riding cross country.  I already had the Golden Mask shaft that I had modified for the Deus, so I started tinkering.  The original Equinox shaft has a smaller diameter than the Golden Mask, so the shaft mounts will not mate up directly.  I took the dremel tool and relieved the areas around the screw holes just enough to get the Nox handle brain/screen section to snug up to the Mask shaft.  I removed the original Mask handle and fitted the Nox in the same location.  (Mask handle is bolted and glued to the shaft, it takes some work to get them apart.)  I then used longer NOX sized metric bolts (shown below)  snugged them into the NOX handle around the Mask shaft.  Its a very tight fit so the bolts end up a little bent.  I then cut the heads off the bolts to make them more or less studs.  I cut and drilled a hose clamp band, fitted it over the studs, then pulled them down tight over the shaft with a nut and washer combination.  I added a little black paint and the whole thing is really stable.  I'll had a little black Duct tape to the whole mess so that it doesn't hang up on my shirt or pants. 
      It collapses to 24 inches and fully extends to about 50 inches.  The Golden Mask shafts are all carbon fiber so corrosion, weight and shaft wobble are not a problem.  I gave it a test run this morning was quite impressed.  For whatever reason I can not explain, my bump falsing was cut by about half.  That was the first thing I noticed so I went through all the set up functions to make sure I hadn't accidentally changed something like Sens or Recovery.  Nope, all my same settings, but now a noticeable reduction in bump sensitivity.  I don't know how, but I'm liking it a whole lot better now.   



    • By calabash digger
      He made this custom 28 inch dive shaft for me....

×
×
  • Create New...