Jump to content

Fisher Impulse AQ (formerly Aqua Manta) Pulse Induction Metal Detector


Recommended Posts

3 hours ago, Mark Gillespie said:

I'd love to compare this machine to my TDI at the beach.  But it most likely won't be available before August.   I know there is a lot of discussion as to depth and that it will detect a nickel at 17".  This compared to my TDI at 16", but the TDI has a 12" coil and the AQ will have the 12 1/2" coil.  Size will also increase the depth capabilities.  So that being said, it would be very interesting to see, comparing the two detectors using identical coil dimensions (the old saying apples to apples) .  I know there will be many more advantages of the AQ, pulse delay, iron features etc. but coil sizes need to be the same for a truthful analysis.

 

the difference will be greater
if you have the target at 16 '
AQ will be at 20 '

the difference is stronger on low conductors (gold!)
thanks to the 7us under 16 volts

silence allows you to go further
I detected many gold rings
who was just a breath
  I think the TDI is able to see some
  but they are drowning in the noise
.....

not to mention that tdi are rarely 10us (real)
the best was pulscan 14.4 volts first generation
number from 1 to 200
the real copy of the goldscan 5

mass production to a little lost in performance ....

for AQ the specifications are very strict
to lose nothing .. / and especially the starting point is better !

 

++++ please
ask questions on the forum
I can not answer any mp / takes too much time ...

I do not have a specific release date
no price
(((and if I knew / I could not say)))
and to choose the AQ and TR testers
it's Fisher who manages ....

Thnaks

 

  • Like 2
Link to comment
Share on other sites


On 6/28/2019 at 2:35 PM, LE.JAG said:

the difference will be greater
if you have the target at 16 '
AQ will be at 20 '

the difference is stronger on low conductors (gold!)
thanks to the 7us under 16 volts

silence allows you to go further
I detected many gold rings
who was just a breath
  I think the TDI is able to see some
  but they are drowning in the noise
.....

not to mention that tdi are rarely 10us (real)
the best was pulscan 14.4 volts first generation
number from 1 to 200
the real copy of the goldscan 5

mass production to a little lost in performance ....

for AQ the specifications are very strict
to lose nothing .. / and especially the starting point is better !

 

++++ please
ask questions on the forum
I can not answer any mp / takes too much time ...

I do not have a specific release date
no price
(((and if I knew / I could not say)))
and to choose the AQ and TR testers
it's Fisher who manages ....

Thnaks

 

Of all the detectors I've tested and written reports on for 1st Texas, I can say, I never once ask if I could test, they contacted me to see if I was willing to check a particular machine.  It's not an easy job but extremely time consuming. 

Now that said their is one "You Tube" guy, that in my opinion does the very best detector comparisons and that is without favorites given and that is "detector comparisons" 

 

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Well we are in the July/August production zone so here's hoping units are being mass produced and boxed getting ready to go out. I'm pretty sure I'm going to be a buyer on this one as my hunting has become nearly 90/10 beach to land. I love my 600 with the 15" trash can lid for a coil but I would really like to get deep in the wet sand with a PI. I hope that any of you who know a little more about dates for release will continue to bounce this thread.

  • Like 1
Link to comment
Share on other sites

I too am eager to see this detector released. I've always hunted in the water with VLF but am really keen to try PI to have a bit of an edge and this unit sounds pretty good.

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

I thought I'd bump this up to see if anyone has heard anything.

Link to comment
Share on other sites

I'm quite pitiful.  First ever for me.  I dreamed I had the AQ.  Craziest dream, I could see the controls and all the features.  The whole time (in my dream) I was wondering why I had one.  When I woke up I was even more puzzled.  In the 20+ years of using metal detectors I've not one time dreamed about any of them.  Strange.   

Must be a SUBCONCIOUS thing I guess.

Even though I'm very interested in the machine, I don't think I would ever purchase one just to use one week out of a year but you never know.  I'm more interested in the land version to replace my TDI but what goes on behind the scenes "subconscious" is an unknown thing.  Still has be puzzled and at times confused as to WHY I would have a dream like that.

 

 

 

  • Like 1
  • Haha 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...