normmcq Posted April 8, 2015 Share Posted April 8, 2015 Not ever been a user of a heavy detector, I didn't have to use any support system but wished I had when using a large coil. Now with the ZED I can't detect with out a bungee being attached to a harness or a Hip Stick. Even a bungee has a learning curve. The habit that I got into was to disconnect it from the machine, as it was always out of the way and I could grab the eye and attach it to the detector with out looking. One problem, I didn't always get the right end, then reversing it and readjusting it was taking away from detecting time. My cure, take some electrical tape and close the adjusting end of the bungee. Norm Link to comment Share on other sites More sharing options...
Doc Posted April 9, 2015 Share Posted April 9, 2015 If Minelab was smart they would make the loop on the non attaching end very small. I took a little colored electrical tape so I immediately know which end I am looking at. Doc 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now