Jump to content
Sign in to follow this  
kac

Close Call On Broken Wire

Recommended Posts

Was looking at my AT Pro that I run with a big coil and trying to figure out if I could make a counter weight or not and looking under the armrest I discovered Garrett put a wire clip! After all these years I never noticed it. After giving up on the idea of a counter weight I hooked the headphone wire to the clip and discovered the wire had a nasty slice through it and was only held together by the copper shielding!

Dug through my box of stuff I use for electronic repair I had a container of liquid electrical tape. Looks like I'm good to go. Close call as I plan to hit the beaches this weekend.

  • Like 2

Share this post


Link to post
Share on other sites

Glad you caught it before you had a real problem!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Steve Herschbach
      Garrett Detectors June 27, 2019 - The AT Max is not just another AT Pro. Tim “Ringmaster” Saylor and George “KG” Wyant discuss the superior performance and key feature differences between an AT Max and Garrett’s popular AT Pro.
       
    • By calabash digger
      A look at two detectors and talk about the detecting game of odds...
       
    • By lauchon03
      Hi guys, I have a question, can a coil break the detector computer? because a friend has a garrett at gold and he placed the Nel Storm coil for AT GOLD, after using it for a few hours I turned off the detector for lunch, and when turning it on it did not work anymore, the garrett guarantee said it was a factory problem and it replaced. Now, I want to try that coil with different large nuggets 5g, 10g and 15g but I'm afraid to break my detector, is there any way to check the resistance of the coil and values are optimal for AT gold? Could the coil break the detector? I clarify that it is a coil for AT gold
    • By kac
      I swapped out my Nel Big coil on my AT Pro and put the stock coil on and just for kicks I did a quick air test to see if there was any difference and I found that the targets now hit 15-20% further away ie dime at 10 inch instead of 8.
      For those that don't have Garrett machines and a 3rd party coil, the procedure when changing coil Garrett says to do a factory reset of the machine.
      So if anyone knows, does using a large coil setting on a stock coil essentially do a tx boost?
      Do other machines require factory reset after changing coils?
    • By kac
      I have the AT Pro for a while now and it is very reliable. I got it just before the AT Max was released. Buddy just got the Max recently as he was using my Pro and the controls were familiar for him.
      If you don't already have a pinpointer and looking for a complete package then the Max is a great choice. Depth wise it goes about 50% deeper than my AT Pro with the same size coil. That is the equivalent of my AT Pro with a Nel Big coil weighing 3 lbs and measuring 17x15". The true All Metal mode is great in open areas with little or moderate trash, Iron Discrimination on Max is better. AT Pro with stock coil hits quarters 12" or less on average on the ground around here that has high mineralization though I had picked up a Spanish Reale at 14" but it was really faint. Typically in poor conditions the Pro hits in the 10" and under range" which is average for any machine with an 8 1/2 x 11 coil
      Comparing the 2 machines I think the AT Pro audio tones are a little easier to follow and notch discrimination is just a simple 2 clicks.
      The Max has a threshold control that is adequate but I find the lowest tone is none and next tone click up is a little loud. That could be just my preference as I also use a Tesoro with much finer controls since it has potentiometers and is an audio only machine.
      Both the Max and Pro have fairly course id blocks as compared to other machines out there and can limit discrimination but going a block under or over is not a big deal.
      Learning curve on the MAX is really short, no menus to decipher through and you should be up and running in a few minutes. There are no canned pre-sets as many machines have. The AT Pro has canned Standard (noob) mode that bings on a target and is rarely accurate and Pro modes with tone roll that I ended up using quickly and found it more responsive. The Max is basically a more of a professional model of the older Pro.
      I had considered upgrading my Pro to the Max, maybe next year as they are solid and reliable machines and the Max does pretty well in the Salt in the single frequency class.
      If you decide to get one also consider the RnB lithium battery for them. I get over 40 hours running with no performance drop as compared to alkalines that as they wear down the machines performance diminishes. Think the rechargeable battery runs around $80.
×
×
  • Create New...