Jump to content
Sign in to follow this  
Steve Herschbach

Fisher Impulse AQ Video - Hrs® Highly Reactive System

Recommended Posts

Demonstration of the high speed responses for various objects waved under the coil of the new Fisher Impulse AQ metal detector. HRS® "Highly Reactive System" 3/19/2019 Official Fisher video.

Fisher Impulse AQ Detector Data & User Reviews

fisher-impulse-aq-highly-reactive-system-hrs.jpg
Fisher Impulse AQ HRS® "Highly Reactive System"

Share this post


Link to post
Share on other sites

That's very impressive.  I think if I was to buy one it would be the first detector I'd be forced to use headphones with though, I couldn't imagine walking along the beach and my detector make fart noises as I pass over a nail, I get enough looks already swinging my detector, it'd be far worse if my detector started farting ?

They accidentally had a bit of a typo too calling it a Golg ring twice in the video.

This is a pretty exciting detector release, I really really hope they make a prospecting model at a reasonable price.

 

  • Like 1
  • Haha 2

Share this post


Link to post
Share on other sites

These videos were interesting while they were still up. At least a peek at the much discussed project. Looking at it, I did not see anything I wanted bad enough to pay big money even though I like the general concept. Anyone else have an opinion on this?

Share this post


Link to post
Share on other sites

Well, you have to be a person that does a lot of beach detecting. If you are not a beach hunter, no, I don't see much reason to be interested unless you like playing with new technology.

I am sure many beach detectorists are loving what they are seeing. The physical design is not quite what I would have done but nothing ever is.

Share this post


Link to post
Share on other sites

 

  • Like 2

Share this post


Link to post
Share on other sites

Nothing new that I can see.  My White's SL can perform the same audio responses.  Like I said, nothing new that I can see.  I can detect a gold ring and ignore nails too.

 

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Joon hawn oh
      Don't you know when it's going to be released?
    • By Rick Kempf
      The latest developments of the AQ pre-production platform continue to increase the utility of the ferrous discrimination capability of the machine. Steady refinement of the design have made the machine not only deeper overall but greatly narrowed the gap between sensitivity in all metal and sensitivity in the iron ID modes of mute and multi-tone. 

      I suspect that if no iron/steel trash existed at the beach, no serious beach hunter would use anything except a Pulse Induction machine - unless they were in dry sand, and maybe not then. The reason I say this is that the depth advantages of existing PI machines is well demonstrated since they can operate on most beaches without the penalty of using ground balance. Also, except for iron/steel, no other level of discrimination is useful since gold jewelry can appear almost anywhere in the ID range above iron. So of the iron wasn’t there - PI’s would likely dominate. 

      In the case of Phase shift discrimination systems like VLF IB detectors use, the strong iron signal dominates the audio output, either silencing the audio entirely in the case of a single tone VLF, by nulling like an FBS/BBS - or by giving a lower tone in a multi-tone Detector. Even in the case of the multitone VLF’s, hearing the non-ferrous target depends on the recovery speed of the processing hardware in the detector. 

      With the AQ’s PI time-based discrimination, The discrimination of iron is reported to the user either as silence (in the mute mode) or as a low tone (in the case of multi-tone). 

      In mute, not only do you not hear the iron, but you hear instead silence - unless there is a non-ferrous target, in that case you hear the target with no hint of the iron at all. In this mode, the AQ software simply makes the ferrous targets disappear - just disappear. 

      In the case of multitone, you hear a high tone for non-ferrous low and medium conductors and a high tone for ferrous targets - close or even superimposed, makes n difference you would hear both tones in any case. 

      This has several major advantages. 

      First, there is “zero recovery speed” - All targets produce an output signal if they return one - the ferrous is - by operator choice - either silenced or assigned a low tone. The low/medium conductors always return their characteristic high tone. This occurs 100% of the time - there is no “switching delay” from target to target based on processor speed limitations happening. 

      Separation distance between adjacent ferrous and non ferrous targets is ZERO. 

      By zero, I mean exactly that, even non-ferrous directly beneath ferrous gives a clear non-ferrous high tone and the iron simply “isn’t there” (in mute - in multi-tone it gives a low tone which you would hear along with the non ferrous high tone). 

      This means that “silent masking” that Tom wrote about long ago, where even a tiny bit if ferrous like a common staple can mask a deeper and larger valuable target, is largely eliminated. 

      Now this isn’t magic, it’s just that the iron is above the ground balance point (or at it) and you are hearing the signals below the GB point and the ones at or above the GB point are silenced (or give a low tone). 

      Is it perfect? - no. In discrim on the AQ some high conductor targets will be “above the GB point” and be treated as iron. If your idea of a good beach hunt is finding a bunch of dimes and quarters in dry sand, then stick with whatever light, cheap VLF you want, they can help you avoid all that aluminum and gold which would just slow you down - lol 

      All this is clearly demonstrated in the video I have linked to before. The machine in the video is the Manta prototype from 3-5 years ago. The system has gone through a lot of development since then, including the very latest gains in overall depth and depth in the iron ID modes which I reported in the first sentence in this post. 

      Will the AQ “obsolete” any other detectors? Depends on what you mean by obsolete. The gas turbine aircraft engine (the jet) quickly replaced the extremely complex, high maintenance multi cylinder reciprocating aircraft engines for heavy, fast and high aircraft, but lots of light aircraft are still piston powered. The piston engine is still undergoing development for some aircraft applications. 

      So I expect that IF the AQ in the hands of the early buyers lives up to its claimed capabilities, that serious beach gold hunters will adopt it quickly. When a new tool in the hands of early adopters proves to be superior at doing a specific job to the previous best tools for the job in question, those who are really serious about performance for economic or other reasons will adopt the new tool and stop using the old one. How many framing carpenters still use a hammer. Not many if the compressor/nail gun noise at any construction site is any guide. The framing hammer is not obsolete - it still works just fine - but for serious users the nail gun became “compelling”. 

      Time will tell how “compelling” the AQ will become for serious beach jewelry hunters.
       
    • By Steve Herschbach
      There is on-going field testing of the Fisher Impulse AQ in progress trying to improve the discrimination. This despite the machine getting ready to go to production at any moment.
      For those that do not know metal detector development never stops. It just gets to a point where it is good enough and you launch. Engineers can improve for eternity if you let them. This does raise a concern however. This machine is as far as I can tell using a new premise for what it does, and is obviously up against deadlines to get out the door. There is nothing here about internet update capability, and in fact it seems I recall somebody at FT saying there never would be such a feature on their machines. But given that nearly every serious platform released by FT sees software bugs and updates in the first year, including the recently released F-Pulse, the odds are this machine would benefit from an update once it gets into user hands and the inevitable bug is found. It really is a set up for having to mail machines back to be updated.
      I would like to be one of the first to jump on one of these but given the First Texas poor track record in this regard a lack of update facility does give me pause, especially in a detector that will likely be over $2000. I get a cheap detector having no update facility, but First Texas may end up regretting not putting the capability in this detector. Forget the unhappy customers - it costs the company money if it ends up having to physically reprocess every machine sold to perform some kind of software fix. In this day and age internet update capability is an expectation - every Nokta/Makro machine no matter the price has it, even the upcoming under $300 Simplex. I am a bit amazed that there is no mention of this capability on what appears to be the most expensive First Texas metal detector ever made. 
      Source thread at Dankowski Forum
      Fisher Impulse AQ Data & User Reviews

      Fisher Impulse AQ metal detector
    • By Steve Herschbach
      In a weird way I see this as good news. Apparently Fisher was ready to start producing the Impulse AQ. The reason I know that is there has been a publicly announced "production delay" over some sort of mechanical aspect of the detector. So I read that as meaning that as soon as this hardware bug gets addressed units will be rolling out the door. The only problem is we don't know how long it will take to fix the bug, but they must be on it 24/7 at this point. Management has to be cracking the whip hard by now to get it out the door. I have to assume we will see this before end of summer. Fingers crossed! 
      Source for the info at Dankowski Forum
      Fisher Impulse AQ Data & User Reviews

      Fisher Impulse AQ metal detector
    • By Steve Herschbach
      Demonstration of how the new Fisher Impulse AQ handles non-ferrous items surrounded by or under ferrous trash. ZTS® "Zero Target Separation" 3/19/2019 Official Fisher video.
      Fisher Impulse AQ Detector Data & User Reviews

      Fisher Impulse AQ ZTS® "Zero Target Separation"
×
×
  • Create New...