Jump to content
Sign in to follow this  
Bob'ke

Adapter To Fold Your Equinox Grip / Pod Into The Armcuff

Recommended Posts

Hi All,

As I looked on the website of my french md-dealer I saw an adapter to fold the grip/pod of the EQX into the armcuff. Not for me, but maybe something of interest to some of you who like to take your EQX travelling in a small case...

FYI:  Here's the link: http://www.shop-lefouilleur.com/v2/fr/nouveautes/842-bascule-poignee-equinox-7861560031186.html

€ 39 = us$ 43,80

Greetings,

Bob'ke

Share this post


Link to post
Share on other sites

Interesting,  if it's sturdy i think it would be great to protect the pod. And i bet the backpackers would love something like that.

Share this post


Link to post
Share on other sites

Looks 3D printed...I hope it has 100% infill.

Share this post


Link to post
Share on other sites

For travel....... this is pretty cool.   BUT..... when at home just like that travel shaft, i wouldnt use it constantly.   For water hunting ..... not sure it would stand up to the torque thou.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By GB_Amateur
      As mentioned previously, after rereading Dick Stout's Coin Hunting... In Depth book over the holidays I took his advice and stepped away from my standard sites to find new ones.  It seems to be working (thanks, Dick).  Statistics on that later in this post.  Last week I went to one of those 'new sites', a century old park, and in the first 2 hours I found 83 cents in modern coins searching along a road and around a crushed stone parking lot that had previously produced only one old coin -- a beat up Wartime nickel ('Warnick').  I decided to move to a picnic area for the last hour, and as you can see in the picture, I was rewarded.  (Sorry for the overexposure on the Warnick.)

      One of the Buffies showed up first, about 5-6 inches.  Next was the Merc at 4-5 inches.  The other two nickels followed (neither more than about 4 inches deep) and the big surprise was the Indian Head, also only about 4 inches deep.  My previous Personal Record ('PR') was only two old coins in one day's hunting.  Note that I don't count Wheat pennies in this category.  My single day PR there is 27.  Needless to say I was quite pleased.
      Oh, the 22 cartridge was found next to the above mentioned parking lot on a previous hunt.  Given that it's in a muni park (and we don't have gang problems..., etc.) I assume this was dropped long ago.  It's possible it was dropped after the park opened by a hunter who was getting his gear together after getting out of the car, before exiting the park on foot into the nearby woods.  The lead bullet appears to have 3 rings, one smooth and two serrated (if that's the correct word).  Can anyone put an age on this?  It was oriented vertically about 6 inches deep and sounded as sweet as any silver dime I've ever found, with the TID centered around 27.  Except for the 'P' on the back of the Warnick, there is no mintmark on any of the other coins.  The IH is 1903 and the Buffie dates are only partially visible.  I think one is 1916 and the other 1924.  None of these is scarce, but they still get counted in my 'other old coin' category.
      A little about the park.  As I mentioned it was established over a century ago.  I knew of its existence but figured so did every coin hunter within 100 miles.  Surely there was nothing left for me....  But another thing I've learned is that there is no such thing as "hunted out".  I've put 52 1/2 hours into hunting this park so far (all in 2020) and there's still more uncovered area awaiting.  Here are some numbers to mull over:  my 'other old coin' finds per hour is 0.27 for this site compared to 0.08 for all other hunted sites since beginning of 2017.  8 of the 14 finds are nickels.  Meanwhile Wheat pennies recovered per hour is 0.21, compared to 0.26/hr for all other sites starting in 2017.  And here is a sampling of my trash finds:

      These are from 12 1/2 hours of hunting this park.  All but a couple of the ring-and-beavertail pulltabs had Equinox TID's in the modern USA coin regions:  12-14 (nickels) and 19 and above.  If the nickel and pseudo-nickel target ID touches 15 I don't dig.  My custom high tone is 20 and up to make sure I notice Indian Head pennies.  (Note from the photo: I count Zincolns as trash and that's what the pictured discs are.)  The 14-18 region is typically thought of as pulltabs, but those in the photo (exception of a couple r&b's) all sounded and TID'ed like nickels.  The aluminum screwcaps TID 21-23.  Crown caps can be in both nickel zone and Zincoln zone (elsewhere, too), depending upon composition.  I did dig more trash than this, mostly can slaw but also some aluminum foil and the usual few bent nails, square nails, copper wire, etc.  This park is absolutely loaded with the old pulltabs, and the broken off beavertails are the worst.  It got to where I was requiring the TID to at least flash a 13 for me to dig 'nickels', and still you see what I pull out.  Unfortunately I later dug a pure 12 and it was a nickel.  😪  I wonder how many of those I left in the ground.
      If you're still here I hope you don't mind one more statistic:  for common coins of denomination 25 cents and less (so not counting Wheaties or other old coins, but including Zincolns), the fraction of nickels among common coins since beginning of 2017 (but not counting this site) is 15%.  At this site (again, not counting the eight old nickels) is 26%.
      In summary, I'm finding a lot of old coins compared to my other sites, but not more Wheaties.  I'm finding a lot more nickels (relative to other coins) than my other sites.  I'm finding tons of pulltabs in the nickel zone.  How does all this tie together?  Simple:  the site has been hunted by detectorists cherry picking the high conductors and ignoring the nickels because they don't want to dig pulltabs.  Of course they missed some Indian Heads (probably didn't want to be bothered with Zincolns either) and a few silver dimes.  Hopefully I'll find a higher denomination silver coin, but even if I don't I'm happy with the oldies that have been showing up.
    • By Bash
      After a bit of a drought of finding cool coins with the Equinox, I found another V nickel detecting in the neighbors parking strip in between thunderstorms.  It was pretty worn and pitted, and not of any numismatic value, so I cleaned it up a bit.


    • By Ridge Runner
      I find myself waiting again for something new they call Apex .
       I had been thinking about buying the Vanquish 540 pro pack but about the time I was going to pull the trigger on it another toy pops up. The trouble is I can’t have it today and not even tomorrow. Just like always I find myself in line waiting on something or someone.
       Well I’m not standing in line for nothing anymore.
       I’ve had a Nox 800 but sold it and I’m still kicking my butt for doing that . I had a detector that out shined all others and like said stupid sold it.
       Enough is enough so I called Rob and ordered a Nox 800 , 6” coil with a extra lower shaft and a MI 6 XP Pinpointer for my ORX .
       I ordered this just this past Monday and by 6 the next morning the check was in the mail. 
      I wish all of you the best that’s waiting on the Apex. Just mark me off that waiting list . Chuck 
    • By ColonelDan
      I was hunting at the beach yesterday and did my usual "dial it in" routine...adjusting F2, Recovery and Sensitivity using my test sticks to optimize my EQX 800 performance for that particular beach.

      As I hunted, I got a strong tone of a high conductor and started to dig and dig and dig. I couldn't see or find the target but I knew it was still there...somewhere...the EQX said it was!

      I finally narrowed it down to a certain pile of sand from the ever growing hole. Still couldn't see it but it was there among the brown sand...somewhere. Finally resorted to my Pro-Find 35 pinpointer. It rang up nicely but I still couldn't see this high conductor! I started to test small hand fulls at a time and finally...finally I saw a minuscule piece of wire on the edge of my hand. Could this be what all the fuss was about? YES. I measured the depth of the hole with the Pro- Find 35 and saw that it was approximately 8 inches!

      I brought the wire home specifically to post this story about the importance of adjusting your detector to meet the conditions. When we change beaches, I "dialed in" my EQX again for that new beach and had to change the settings from that first beach where my EQX sniffed out that piece of wire. Conditions change and so must your settings....one size DOES NOT FIT ALL.

    • By Andy Sabisch
      Wanted to see who was using the Equinox for prospecting and if you are, woudl you be willing to share settings and some find photos for the new Equinox Handbook that is getting ready to ship to the printer . . . will send a copy of the book when they come in if we can use them in the book.
      Send prospecting find photos or settings to asabisch@att.net
      Thanks in advance,,
      Andy Sabisch
×
×
  • Create New...