Hit a park that used to be an estate then run by Nuns for many years then turned over to the town as a park. There is approx. 10 acres or so and most of it over grown so I figured I would hit some of the area that has been flattened down by the winter before it grows back in. Surprisingly there is tons of stuff there and doesn't seem to have been detected on. In just a few passes in a small area I found a really old remnants of a button with no marks, handful of pocket change, 18k gold earing .037oz and this old dime in pretty descent shape. New stuff dropped is probably from people sledding down the hill side.
I went out this afternoon on the beach in 20 mph winds and about 58 degrees so it was going to feel nippy. This trip I put on the right jacket. It is one that I found in the surf a few years ago. It is a Port Authority jacket made in Vietnam. It's kinda like a ski jacket but wow, I was not bothered at all. Normally I have about 3-4 layers and can still feel the wind blowing through!
On to the hunt, I found the chain as a result of seeing another detectorist closing in in front of me and I wanted to go back the way I came. I had just dug a coin and about 5 feet away I got a 2 on my 800 in beach 1 at 23 sensitivity. I swung on it a couple of times because this is normally junk on my beaches but I was in the right area to dig most everything so I did. I saw the glitter in the scoop and of course I had to hide it from my fellow detectorist so he wouldn't come over and share my potential patch. haha Later I put it down on the sand and I got a reading of 6. Funny thing is that it didn't chirp like some targets. It was just a solid signal. (It is a combination of .575 and .375 gold and weighs 4.8 grams.)
About an hour later on my way back not more than a couple hundred feet from the chain I got a 21. It was solid and full sounding. It wasn't quite like the pennies which chatter sometimes and go from 15 to 22. I somewhat expected a penny but it is .925 silver. It is missing the stone that was mounted on the top but silver is silver! (It weighs 2.7 grams.)
I would have liked more for 3 hours of detecting but there were no swells to move more sand.
I spent a couple of hours in the local park today, using the Nox 800 with the 6" coil, and found my first gold. The target ended up being 7 gram gold teeth 😀 and TID was 10.
I also found a bunch of change. All of these quarters were in the same hole.
I feel like I am starting to get the hang of this.
It has been pretty fun so far!
Hi to app.
I have a Nox 600 since 1 year and I used here in Italy to find everywhere generally on beaches but not only.
I choosed to buy the 600 instead of the 800 version due to the fact that here I can't find native Gold but this is my opinion that for me Nox 800 was wasted.
I found just 4 Gold little items last year and I made a lot of work for that. I digged a lot on beaches and I digged from VDI 1 to VDI 29 in Beach 1 and 2 depending of near the sea or just in the Sand. As I remember 3 little rings at VDI 6, 10 and 12.
Now what I want to ask you in your experience is:
Is it ok to stay with 600? Or could be very different for finding gold rings in the beach (my possibile gold items here are just rings and other little items on beach, no native gold nuggets...)
Is a good idea to change mi finding way to All Metal mode?
I used generally 5 tones. Do you advice me to start Learning the 50 tones in the way that I could choose to dig low ID (2 to 12) and be more helpful to find gold instead of tinfoil. Now the probability that from VDI 2 to 12 could be gold items la very low just looking at the target ID.
In your esperience with Equinox which trick or method you advise me most for the search for gold objects like rings or earrings or small objects on the beach?
Thank you very much. Every SUGGESTION is appreciated.
I would like to see a table of VDI made by you diggers to compare it with mine on attachment related to findings here in Italy:
By Mike Hillis
You either have the right metal detector for micro jewelry detecting or you don't.
I hunt gold jewelry on land. It is my desired target. I focus on it to the near exclusion of all else. I hunt for hot spots and when I find them I prep them for efficient recovery of new losses. It is what I like to do. And I find pretty small jewelry. Too small to even take good pictures of with my current camera. So I thought I was doing pretty good. Maybe using the term 'Micro' was splitting hairs.
I had asked Tom Dankowski what to use for a Micro Jewelry test piece. He replied back that a 10k White Gold 4 or 6 prong stud earring capable of holding, what? a 1/4 or 1/2 caret stone would be a recommended test object. So I went searching for something and finally obtain something at the right price off of ebay; 3mm solid 10k white gold 4 prong stud earring. Silicone backing. So its just the earring stud itself with a topaz stone in it. Pretty tiny. Smaller than I thought it would be when I ordered it.
Ok. The Gold Bug Pro is a proven prospecting unit, and my G2+ is nothing more than a Gold Bug Pro on a different rod set up. I've seen the pictures of the small gold pickers it can find. So surely it will hit this earring no problem, Rght?
Well, I put the 5" DD on it, and start bench testing. All metal gets a hit on it out to about 1-1/2" if the prong end of the earring is facing it. Horizontal and Vertical orientation presentations are much less. In Disc, I can get a signal about an 1" away with the prong facing the coil and the other orientations are about 1/2" with mostly non-ferrous responses. That is at maxed out sensitivity. Wow. I thought it would be better than that.
I have a V3 with a 22kHz single frequency option with a hot gold program on it that will hit it good, too. Right?
Well I put the 4x6 DD on the V3, load up my hot little gold program and start my test. Hey, I'm getting something, thinking positive...better depth than the gold bug, oh...wait....its picking up my hand. So I transfer the earring stud to a ruler and try again. This time no response. Or at least no usable response. Did some tweaking to the program and still no thing. Wow. Got to try some programming changes and see if I can at least equal the G2.
Not done yet......what about the Omega 8500. No. Not a chance of every finding one these little earrings with that. Put it up.
Still not done yet....what about the F75LTD? Lets give it a try. I put the little football concentric on it, maxed it out and frequency shifted for stability and give it a try. WOW. In both JE and Boost mode it did better than the G2. The G2 audio wasn't that strong but the F75 audio was great in all orientations. And I was getting at least an 1" in the vertical and horizontal orientations and about a 1-1/3" with the prongs facing the coil. And it was giving mostly non-ferrous TID. This reminded me again of what a top notch detector the F75 is and will always be.
Wow. Just Wow. I ended up sitting there thinking about how much time I have wasted at some sites thinking that if 'any' gold was there I would have gotten it. I got over it a day or so later as reality set in and reminded me that hunting really small jewelry has its own little focus and that I need not worry about unless I'm specifically hunting for it. But that if I'm going to hunt for it I need to equipment myself for it.
And that is the back story to my pre-order of the Makro Gold Kruzer.