Jump to content

Recommended Posts

Contact  problems. The + (positive)  tab for the right side battery bends backwards when changing batteries. Any suggestions on a fix?

20190331_195457.jpg

Share this post


Link to post
Share on other sites

well no one has any ideas?, have you tried contacting the manufacturer? they might fix it. who makes it?

  • Like 1

Share this post


Link to post
Share on other sites

Bounty Hunter is the manufacturer and yes I contacted them. I would have too ship the detector back to them. I wanted to reach out to see if anyone had any ideas on a fix before sending it out. No luck so far. Thanks for the reply!!

Share this post


Link to post
Share on other sites

try asking in the bounty hunter/fisher specific forum.

  • Like 1

Share this post


Link to post
Share on other sites
43 minutes ago, gambler said:

try asking in the bounty hunter/fisher specific forum.

Now moved there...

Share this post


Link to post
Share on other sites

The metal tab is probably mounted in a plastic slot on the chassis and the slot has become loose.  Might be able to bend it back with some long needle nose pliers???  You maybe able to open the case and super glue the tab back into position but if something goes awry you may void the warranty???  The best option is to send it to the manufacturer if it’s still covered by warranty.  That way you won’t have any worries about ruining it permanently.  

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Tugboat
      Hi People when you see other detectorists, how much distance should one give each other?  and 2nd question is, i have the minelab 15 pinpointer  but it really struggles unless its all most on the target, it was a free pinpointer that came with the 600. Do i buy the minelab 35 or another brand? thanks
    • By Joe L
      Being new to these forums, if this is not the place for this, please move. Due to excitement just wanted to sing out here.
      I am adding a Gold detector to my arsenal..  I did research this for quite a bit and realized that gold detecting, nuggets anyway, would only be maybe 1%, well maybe less, use of the machine. It would also be used for general detecting and a unit for friends that want to give it a try (it’s a easy to use detector.) But, I do want a capable detector the will work for gold also. Reading Steve’s review and rating of this detector, I'm pulling the the lever.
      For these reasons I have chosen a     Fisher Gold Bug Pro.
      Thanks for listening.  Joe 
    • By kac
      Found this while scouting out another section of woods along a main trail. It's a Harvard Crimsons pin that was gold plated over brass.
      Also found a 61 silver Canadian quarter. Got excited at first until I whipped the dirt off the rim and saw it wasn't a really old USA coin :( . Also a musket ball and small round.
       

    • By geof_junk
      A interesting article with some good videos.
      http://golddetecting.forumotion.net/t26534-home-made-skid-plates-easy
    • By old goldy
      I was wondering if anyone on this site can help me setting up a Goldseeker 9000 VLF/TR Metal Detector.The detector was built here in Australia by the creators who are now Minelab [I think].Well, my dad [Deceased] bought the unit in 1983 but never got a chance to use it because he had a stroke, so my Mum just put it away in the shed,Well, about 6 months before my Mum passed away last year, she gave it to me after she found it cleaning out her shed.There are a few instructions with it but not very clear, so if anyone out there can help me out, it would be very much appreciated.I know it is a good machine, and I would like to use it and try it out.Thanking everyone in advance.
    • By Steve (UT)
      I found this button in a early 1900’s park in Utah County. I has a 3 point crown in the middle. No luck on the “google machine” so hopefully someone on here may have some insight as to a date and or manufacturer.
      The Nox read brass area but it was found about 8” with a square nail next to it.
      thanks for any help with this!


×
×
  • Create New...