Jump to content

Recommended Posts

Hi,

How are we all going? My names Jed and I come from all the way down under!! Unfortunately not Victoria or Western Australia tho..

I was hoping that Steve or perhaps someone else could help me out with a problem I've got with my ATX.

The bottom 'Cam Nut' out of the 3 that you use to tighten the telescopic stem now just spins freely and doesn't tighten. I small black piece of plastic fell out onto the ground. It obviously needs to be glued back on.. somewhere..

The shop I bought the detector from in 2016 is now closed and I'm not sure if I want to risk sending my detector away to someone I've never met to fix it. I'm also not all that keen to take the detector apart myself, but perhaps that will be the avenue I head down.

Has anybody had or heard of this problem before? I would appreciate any input.

Cheers Lads

Share this post


Link to post
Share on other sites

Welcome to the forum!

The following thread shows how to take the rod apart and where that black part came from....

 

 

Share this post


Link to post
Share on other sites

Thank you very much Steve, that is very helpful information, I'll go and try to buy one of those tools and give it a go.

Many thanks

Cyar

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Seeker Shawn
      I noticed Steve mentioned in his post where he rebuilt an ATX into his LTX that he said something about not using his 1st ATX because he'd been using the new one...…...I've been researching for days, eyes are crossing and I can't find anything about any updates to the ATX since it was released in 2013...….except on one thread a person (this year in spring of 2019) said that their new ATX came with a different cord (so possibly Garrett has recently addressed their degrading cord issue?)  Does anyone know anything about either of these? 1. have their been any upgrades to the ATX since 2013 introduction? 2. did Garrett finally fix the cord degredation issue this spring?
    • By Steve Herschbach
      Hi,
       
      I determined that Garrett Infinium DD (not mono) coils work with the Garrett ATX. That opened the door for some kind of hip or chest mount. But the control box is large enough and with the handle sticking out not really working out the way I wanted in that regard.
       
      A nice thing about the ATX is it retains all settings when switched off. So in any location it is just set and forget. The headphones have adjustable volume controls.
       
      I went with backpack mount. I got a cheap but surprisingly nice backpack at Walmart for $20 that was the right size with extra pockets and well padded. I put the control box in nose first and punched a small hole in one lower corner pocket for the coil cable to enter the backpack. The cable comes around under my right arm. The headphones just route out top of the backpack zipper and to my left side. The headphones tuck into an exterior pocket for packing around and I could break the rod assembly down and stow it also if need be. The rods would stick out of the top of the backpack a bit but in reality I would just leave it assembled unless shipping.
       
      The only thing I want to do now is use the headphone adapter dongle to rig an external speaker on one backpack strap near my ear like I do with my Minelab.
       
      Kinda crazy doing this but bottom line is it is sweet. I hope to get out in a few days and give the new setup with 10" x 5" DD coil a spin prospecting. I ran the rig for two hours in a tot lot and it was great. Very sensitive to tiny targets. The coil does not false when knocked about like the stock ATX coil. Should be an excellent prospecting setup for rough terrain.
       
      Coil and rod part numbers at https://www.detectorprospector.com/magazine/steves-reviews/garrett-atx-metal-detector-accessories/
       




    • By Steve Herschbach
      Garrett ATX Owner's Manual, 2.52 MB pdf file, 43 pages
      Garrett ATX Data & Reviews
      Garrett ATX - Steve's Review
      Forum Threads Tagged "garrett atx"
      Garrett Metal Detector Forum
    • By Steve Herschbach
      Garrett ATX Color Flyer, 3.53 MB pdf file, 2 pages
      Garrett ATX Data & Reviews
      Garrett ATX - Steve's Review
      Forum Threads Tagged "garrett atx"
      Garrett Metal Detector Forum
    • By Steve Herschbach
      If does help to have a bulldozer and jackhammer also! Published on Oct 6, 2014 - Yes, over his 35+ year prospecting career Matt has found more than his body weight in gold nuggets.
      Garrett ATX Information Page
    • Guest Paul (Ca)
      By Guest Paul (Ca)
      Hi Steve,
      Wanted to share with you an issue you may have when detecting the sands of Hawaii, I found this out this past Sunday when hunting a California beach.
      No matter how careful you are with keeping sand away from the shaft it will be in there and be almost impossible to get out, The find ocean sand will find it's way in there especially the cam locks boy was it a nightmare getting the find grit out even after washing down the detector and shafts.. 
      In fact, Scratched the shafts that will be the last time I take the ATX to the ocean.  Fresh water lake sand isn't as fine as ocean wet sand so lake sand can be washed off allot easier, If you can hip mount your detector for the ocean wet sand.
      If not, Prepare yourself for punishment.
      If anything, Enjoy your time there and take another detector if you can't get the ATX hip mounted in time.
      Paul (Ca)
×
×
  • Create New...