Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 08/19/2021 in Records

  1. The Garrett Axiom metal detector is new for 2022, and will be released before the end of the year. The Axiom is a ground balancing pulse induction (PI) metal detector aimed primarily at gold prospecting, with possible additional uses for relic/coin, and jewelry detecting. "Advanced pulse timings provide enhanced sensitivity and complete versatility in the most extreme mineralized soils and in saltwater. Choose from four settings, each ideally engineered for finding all types of gold, from larger nuggets to sub-gram pickers." Source: Garrett website Garrett Axiom metal detector Garrett Axiom control panel TERRA-SCAN - Axiom’s advanced system provides independent dual-channel ground balance that covers the full range of mineralization, from heavily mineralized magnetic ground to saltwater, and everything in between. IRON CHECK - This feature helps you audibly identify iron targets with the Axiom when using a DD searchcoil. VOLUME AND THRESHOLD CONTROLS - Not all detectors in this class offer both, with the threshold control often gone missing. 2 AUDIO TYPES - Choose from PWM Audio or VCO Audio options. FOUR TIMING MODES - Fine (Default), Normal, Large, Salt SPEED (REACTIVITY) OPTIONS - Slow, Medium (Default), Fast FOUR GROUND TRACKING OPTIONS - Ground Grab (Default), Slow Tracking, Medium Tracking, Fast Tracking AUTOMATIC FREQUENCY CANCELLATION- Reduce or eliminate electromagnetic interference (EMI) for other nearby detectors, or other external sources. EASY ACCESS TO COMMON CONTROLS - Everything you need at the push of the thumb, with advanced options via an easy access menu. MANY COIL OPTIONS - Three mono coils, and three DD coils, 11", 13", and 16" semi-elliptical. Garrett Axiom 16”, 13”, and 11” search coils, both DD and mono EXTREME BATTERY LIFE - With about 16 hours on a full charge, Axiom’s built-in, high-capacity Lithium Ion battery provides twice the battery life offered by some prospecting detectors! USB-C PORT - For both charging via most stand USB charging options on the market, plus for use to upgrade the Axiom firmware over the internet via your computer! LCD SCREEN BACKLIGHT - For low light conditions. FULLY RAIN RESISTANT - And fully waterproof to control box, for wading in water, coils fully waterproof. HIGH VOLUME SPEAKER - For hunting without headphones. BUILT IN HIGH SPEED WIRELESS - Garrett exclusive Z-LYNK technology, for use with both Garrett wireless headphones, and option Z-LYNK enabled Garrett Pro-Pointer! 1/4" HEADPHONE JACK - For use with all types of popular metal detector wired headphone options. LIGHTEST DETECTOR IN ITS CLASS! - 4.2 lbs. (1.9 kg) with 11" mono coil and coil cover, 4.7 lbs. (2.1 kg) with 13" mono coil and coil cover Official Garrett Axiom Product Page Garrett Axiom Owner's Manual Forum Threads Tagged "garrett axiom" Garrett Metal Detector Forum Garrett Z-Lynk Wireless Audio System Details Garrett Z-Lynk Enabled Pro-Pointer AT Pinpointer Details Axiom Specifications Ultra PulseTM Technology Pulse Rate - 1500 Hz (adjustable) Frequency Scan - Automatic EMI cancellation Z-Lynk Wireless (integrated) - Yes Backlight - Yes Ground Balance - Automatic, dual channel Ground Balance Readings - Dual independent numbers Ground Balance Window - Yes Ground Track Modes - OFF, Slow, Medium, Fast Iron Check - Yes Volume Control - Yes Threshold Control - Yes Tone Control - Yes Audio Type Adjustment - Audio 00 (PWM audio) or Audio 01 (VCO audio) Sensitivity/ Depth Adjustments - 8 Water/Weather Resistance - Yes Waterproof coil/stem - Yes Rainproof control box - Yes Available Searchcoils - 11” x 7” mono coil, 11” x 7” DD coil, 13” x 11” mono coil, 13” x 11” DD coil, 16” x 14” mono coil, 16” x 14” DD coil Length (Adjustable) - Fully extended: 61.5” (156 cm) collapses to 25” (63.5 cm) Total Weight - 4.7 lbs. (2.1 kg) with 13” mono coil and coil cover, 4.2 lbs. (1.9 kg) with 11” mono coil and coil cover Battery Source - Rechargeable Lithium Ion, built-in; 76 Wh, 306 grams Battery Condition Indicator - Yes Warranty - 2 Years, Limited Parts/Labor Standard Axiom Package with Wireless Headphones
    7 points
  2. Just released November 2021, the new Deus II is the latest entry in the simultaneous multifrequency (SMF) category of metal detectors. The Deus II is a fully submersible VLF metal detector aimed primarily at coin, jewelry, relic detecting, and saltwater beach detecting, as well as gold prospecting. The Deus II is a multifrequency detector that can also run at numerous single frequencies, from 4 kHx all the way up to 45 kHz. "A new revolution! Today, XP is once more pushing the limits by creating, the first wireless, multi-frequency metal detector with unique features and performance. Once the coil, remote control, headphones and pinpointer are paired, they communicate with each other wirelessly and without latency using the XP patented radio protocol system. This means that the target signals generated by the search coil are quickly transmitted to the headphones without any delay, giving the DEUS II unparalleled speed and accuracy. The DEUS II performs extremely well in all terrain and conditions, both on land and at sea, thanks to FMF® (Fast Multi Frequency) technology." Source: XP website XP Deus II metal detector XP Deus II control panel Simultaneous Fast Multi-Frequency Multi-Frequencies 4, 7, 15, 21, 28, 35, 45 kHz 49 Single frequencies 4 – 45 kHz Waterproof to 66 feet / 20 meters Shockproof Fully wireless (coil to control box cable required for submersible use) Removeable Controller Detect on all terrains Mountains, Field, Desert, Beach, Underwater In-Depth Target ID Enhanced Iron Discrimination Capability Rich audio options Wireless Audio Lightweight 1.76 lbs / 800 grams Ergonomic Telescopic S-Stem Adjustable telescopic S-Stem/Shaft Optional: Bone conduction headphones Optional: Wireless headphones 5 Year warranty Official XP Deus II website See threads on XP Forum for latest news and discussion Forum Threads tagged "xp deus 2"
    3 points
  3. The GPX 6000 is a new gold prospecting metal detector from Minelab. The Minelab GPX 6000 is a pulse induction (PI) gold nugget detector, featuring a lightweight, well-balanced, rainproof package, coil options, built in wireless headphone capability, and quick release Li-Ion rechargeable batteries. See the specifications below for details. The Minelab GPX 6000 is powered by the all new GeoSense-PITM technology, which analyzes and responds to ground signals with great clarity and precision. Now you can detect difficult environments once thought undetectable. GeoSense-PITM technology rapidly suppresses unwanted signals via three overlapping feedback systems for superfast detection of all gold pieces. The GPX 6000 has three search coils available, an 11" round mono, a 17" elliptical mono, and a 14" round DD coil. The coils are not compatible with other GPX coils, having an entirely different connector. The Minelab GPX 6000 will be packaged with different coils in different regions. The Africa model will come with the 11" mono and 17" elliptical coils, plus two batteries. The U.S. model will instead include the 11" mono and 14" DD coils, and a single battery. Mains and DC charging adapters are included, as well as the new Minelab ML 100 wireless headphones. NEW! - Minelab GPX 6000 Video Training Series Minelab GPX 6000 gold nugget detector MINELAB GPX 6000 FEATURES POWERED BY GeoSense-PITM - GeoSense-PITM technology quickly and precisely analyzes gold signals buried in the ground, so you'll be able to ear all gold pieces clearly and accurately. FIND ALL GOLD - Built by the world leader in metal detection technology, Minelab's GPX 6000TM is the fastest, lightest and simplest way to find all types of gold in one machine - from tiny pieces of gold to that elusive 'retirement' nugget. EASY EXPERT - With automatic features and an easy-to-use interface, you'll be an expert at finding gold from the moment you turn on your GPX 6000TM. Because Automatic Ground Balance continuously adapts to changing soil conditions as you swing your detector over the ground, there's no need to adjust any settings. Finding gold has never been easier. LIGHTER SWING - The GPX 6000TM weighs only 2.1 kg (4.6 lbs) with the 11" mono coil and 2.3 kg (5.1 lbs) with the 14" DD coil. The GPX 6000TM features light carbon fiber shafts, streamlined control box, and signature U-FlexTM armrest - detect longer and feel comfortable doing it. With a Li-Ion quick-release rechargeable battery supplied, you can detect for up to 8 hours on a single charge. BUILT TO LAST - Tested in the harsh environments of the Australian outback, the GPX 6000TM can withstand extreme heat and heavy rains. A 3 year warranty is included, backed by Minelab's global support. CHOICE OF COILS - The GPX 6000TM includes a versatile 11" Monoloop coil for tight spaces and pinpointing tiny gold pieces, and a large 14" Double-D coil to detect gold accurately even in salty environments (both coils waterproof to 1 m / 3.3'). LOUD AND CLEAR AUDIO - Whether listening to the 'loud and clear' external speaker or the supplied wireless Bluetooth headphones, you'll never miss out on the sound of gold with the GPX 6000TM. MINELAB GPX 6000 SPECIFICATIONS Search Modes / Ground Type - Difficult (Default) / Normal Double-D Modes - EMI Cancel (Default) / Conductive Ground Cancel Ground Balance - Auto / Manual (Quick-Trak) Noise Cancel - Auto Sensitivity - Manual (Levels 1-10) / Auto (Level 11) /Auto+ (Level 12) Threshold Tone - On / Off Volume - 5 Levels Length Extended - 145 cm / 57 inches Length Collapsed - 76 cm / 30 inches Weight - 2.1 kg / 4.6 lbs (with 11" mono coil) Display - Monochrome LCD with Backlight (Low, Med, High, Off) Audio Output - In-built Speaker / Wired 3.5mm (1/8") Headphone Jack Wireless - Bluetooth aptX Low Latency Supplied Headphones - ML 100 Wireless Headphone Supplied Battery - Quick Release Li-Ion Battery, 5833 mAH Chargers - AC Mains Charger & 12V Battery Clip Cable Included Battery Runtime - Approximately 8 Hours Supplied Search Coils - GPX11 11" Round Mono & GPX14 14" Round DD Optional Search Coils - GPX17 17" Elliptical Mono Waterproof - Coils Submersible to 1 meter / 3.3 feet and Detector Splash / Rain Proof Key Technologies - GeoSense PITM / Bluetooth / aptX Low Latency Minelab GPX 6000 User Manual Minelab GPX 6000 Accessories & Spare Parts Minelab GPX 6000 Video Training Series Minelab Metal Detector Forum Note: Minelabs GPX 6000 features three coil options: the GPX11 11" monoloop coil for versatile gold hunting, the GPX14 14" Double-D coil to detect gold accurately even in salty environments, and the GPX17 17" elliptical coil, to find large gold nuggets at greater depth. All coils are waterproof to 1 meter (3 feet). Early information indicates the Africa model will come with the 11" mono and 17" elliptical coils, while the U.S. model will instead include the 11" round mono and 14" round DD coils. Minelab GPX 6000 control summary Bluetooth® Control Enables Bluetooth® for connection of wireless headphones - Initiates Bluetooth® pairing mode for connecting Bluetooth® headphones (long press for at least 2.5 seconds). Backlight Adjust Cycles through the backlight brightness settings - High, medium, low and off Power On/Off - Turns the detector on and off - Restores factory default settings (press and hold from off for at least 7 seconds). Sensitivity Adjust - Adjusts the sensitivity level. Ground Type - Toggles between Difficult and Normal Ground Type. Toggles between the Threshold On / Off settings (long press for at least 2.5 seconds). Noise Cancel - Initiates the Noise Cancel process. When a Double‑D coil is connected, toggles between the Double‑D Modes — EMI Cancel and Conductive Ground Cancel (long press for at least 2.5 seconds). Volume Adjust - Adjusts the audio Volume Level. Quick‑Trak - Press and hold Quick‑Trak Ground Balance to conduct a Ground Balancing operation. Minelab GPX 6000 relative performance Minelab GPX 6000 control closeup
    3 points
  4. The Minelab SDC 2300 metal detector was released in 2014 and is still in production. The SDC 2300 is a fully submersible pulse induction (PI) metal detector aimed primarily at gold prospecting but with possible applications for saltwater beach detecting. Note that the SDC 2300 8" round mono search coil is hardwired into the control box and cannot be changed. "This compact waterproof detector comes with easy-to-use controls and is assembly-free. Quickly find more gold patches and more gold nuggets! The SDC 2300 was field tested by Minelab professional testers in real gold fields (heavily mineralised) and delivered proven results. "SDC 2300 strikes gold in field test land previously hunted by another (brand) midrange machine" - Minelab field tester. “You will find more small nuggets and fine-threaded specimen gold in mineralised soils with the SDC 2300 than any other gold detector, including the GPX 5000.” “The SDC’s unique advantage is ultra-low ground noise in mineralised and saline soils AND very high sensitivity to fine gold and fine targets (like chains) at the beach.” - Bruce Candy (Chief Scientist Minelab Electronics, SDC Inventor)." Source: Minelab website Minelab SDC 2300 metal detector Minelab SDC 2300 control panel Compact - Folds to small portable size, 8.5” (216mm) by 15.7” (400mm). Fits into carry-on luggage and most backpacks. Waterproof Capability - Fully submersible to 10’ (3m) for detecting riverbeds and shorelines, allowing you to transition with ease from land to water. Rugged & Assembly Free - Military grade construction, one piece detector designed to perform in the toughest conditions. No assembly required. Easy Patch Hunting - Search quickly and efficiently in hard to reach and remote places to find those elusive gold bearing clustered deposits. MPF (Multi Period Fast) technology incorporates extremely fast Pulse Induction switching between Transmit (Tx) and Receive (Rx) detector signals. Therefore minimal residual transmit signal is present during the receive cycle, enabling clear sharp detection of very small gold. Official Minelab SDC 2300 Product Page Minelab SDC 2300 Owner's Guide Minelab SDC 2300 - Steve's Review Forum Threads Tagged "minelab sdc 2300" Minelab Metal Detector Forum
    1 point
  5. The Garrett Goldmaster 24K metal detector was originally introduced by White's Electronics in 2018, and was still in production when White’s closed up shop in 2020. Garrett Metal Detectors subsequently purchased White's, and the 24K has the distinction of being the only White's model that Garrett decided was worth continuing to produce. All accessories like coils are compatible on both versions. The Garrett Goldmaster 24K is a 48 kHz induction balance metal detector aimed primarily at gold prospecting. "Featuring a 50% increase in coil voltage over previous models along with an all-new XGB ground balance system, take your prospecting to new depths with the Goldmaster 24k. This machine represents a new generation of VLF detection technology, with features that both sourdough and greenhorn prospectors can appreciate. Starting with the industry-standard 48 kHz operating frequency, we’ve packed all the necessities into one package to put you on the gold. A large, backlit display shows you all the machine’s settings as well as valuable target information. The Target Graph at the top of the display shows Ferrous, Gold, and High Conductor ranges, which is mirrored with Target ID numbers ranging from 0-99. An all-new XGB ground balance system can handle mineralized ground unlike other VLF prospecting machines." Source: Goldmaster 24K brochure Garrett Goldmaster 24K metal detector Garrett Goldmaster 24K control panel For advanced users, TracLock and Ground Grab are just a tap of button away. You can assign a ground balance offset in both TracLock or XGB modes. To help prospectors that prefer drywashing, sluicing, or panning, the Goldmaster 24k features a Ground Scan mode that can show you where valuable paystreaks are in streambeds and washes. The Goldmaster 24K offers 10 levels of adjustable sensitivity, adjustable audio volume with two levels of Boost, adjustable discrimination, vSAT, adjustable threshold, non-motion pinpoint, and a Tone ID mode. But don’t let that scare you if this is your first prospecting machine – this is a turn-on-and-go machine, with advanced features you can grow into as you gain experience. SENSITIVITY – Set the sensitivity at a level that does not result in false signals from the ground. Very strong ground may result in the symbol on screen and a loud sound – this means the sensitivity is too high. GROUND BALANCE – With the default setting, the detector will use XGB to automatically ground balance. Tap to lock the ground balance to the current setting. Tapping when the ground balance is locked will update the current ground setting to what is under the coil. GROUND SCAN – Hold to put the detector into Ground Scan mode. The top bar displays the ground strength and the two digit numbers display the ground type (phase). Useful for tracing paystreaks. IRON CANCEL – Tap to silence hot rocks, trash and mineral changes in both audio modes. Hold to select the Iron Cancel setting (1 bar is default). Note that this setting may decrease the detector’s sensitivity to very small gold, but is necessary in difficult ground conditions. VOLUME and THRESHOLD – Tap to adjust the volume with the up and down buttons. Hold to adjust the threshold with the up and down buttons (“th” displays on screen). Set these to a comfortable level for your hearing and preference. AUDIO MODE – With the displayed on screen, the detector is in “BEEP” audio mode (high tone = good target, low tone = bad target). The default setting (without on screen) is a traditional All-Metal audio mode with greater sensitivity to small targets. SAT – SAT can smooth out ground inconsistencies. Hold to adjust it (“Sa” displays on screen, 2 is the default setting). PINPOINT – Hold for non-motion pinpoint mode. In difficult ground this mode may be affected by mineralization. BACKLIGHT – Tap to enable the backlight (this reduces battery life). FREQUENCY SHIFT – Hold when turning the detector on to shift frequency (useful when there is EMI). Power off to save the selection. FACTORY RESET – Hold when turning the detector on to perform a factory reset. AUDIO - Built in speaker, 1/4” headphone jack, lightweight headphones included. BATTERIES - 8 AA Rechargeable NiMH batteries included, with International mains charger, plus 12V charging adapter. WEIGHT - 3.5 lbs COILS - 6" x 10" DD standard. Official Garrett Goldmaster 24K Product Page Garrett Goldmaster 24K Owner's Manual Goldmaster 24K XGB Ground Tracking Explained White's Goldmaster 24K - Steve's Review Forum threads tagged "24k gmx" Garrett Metal Detector Forum
    1 point
  6. The Nokta/Makro Legend metal detector was introduced in 2021 and is still in production. The Legend is a fully submersible VLF metal detector aimed primarily at coin, jewelry, relic detecting, saltwater beach detecting, and gold prospecting. The Legend is a simultaneous multifrequency detector that can also run at one of several single frequencies: 4kHz, 10kHz, 15kHz, 20kHz, and 40kHz. "Get ready to own The Legend, the newest metal detector from Nokta | Makro. With Simultaneous Multi-Frequency, you can now see even more treasure right beneath your feet. Don't worry about missing the gold while you hunt for relics, because the Legend does it all. A carbon fiber lower shaft gives you added stability and takes a little weight off you while you detect for hours. At only 3lbs, you won't have trouble toting around this detector, particularly since it collapses to 25". And a removable, rechargeable battery pack will let you do just that, detect for hours and still have a spare battery (not included with this set only with the Pro Pack) to keep you digging up treasures. A fully waterproof metal detector up to 10ft or 3m with vibration mode lets you get in the water and still feel every signal that your detector is catching. The flashlight that is standard with the Simplex comes with the Legend as well so you can always be sure to spot the gold or silver even at night. Whether you prefer to look for coins, jewelry or relics, the Simultaneous Multi-Frequency will not leave you disappointed." Nokta/Makro Legend metal detector Two Simultaneous Multifrequency Modes Five Selectable Single Frequency Modes Frequencies 4kHz, 10kHz, 15kHz, 20kHz, 40kHz Programmable Target Id Yes Target Id Segments 60 Threshold Adjustable Discrimination Adjustable Pinpoint Mode Yes Ground Balance Automatic, Manual, Tracking Vibration Mode Yes Search Mode Types Beach, Custom, Gold, Park, Pinpoint Search Flashlight Yes Backlit Display Yes Volume Control Yes Bluetooth Compatible Yes Interchangeable Headphones Yes Battery Quantity 1 Battery Life (hr) 8-20 hours depending on settings Waterproof to 10 feet Rechargeable System Yes Special Features FerroCheck to Inspect Trash Targets, Frequency Shift, Noise Cancellation, Carbon Fiber Lower Rod, Vibration Mode, Digital Clock and Time Tracker 2 Year Warranty Nokta/Makro Metal Detectors Forum
    1 point
  7. The Tarsacci MDT 8000 metal detector was introduced in late 2018 and is still in production. It is a selectable frequency metal detector aimed primarily at beach detecting at this time but that may find applications in relic detecting and other types of detecting. The Tarsacci MDT 8000 allows the operator to choose between one of four operating frequencies - 6.4, 9, 12, and 18 kHz. Tarsacci is a new U.S. based company just getting off the ground , founded by Dimitar Gargov. Dimitar worked previously at Fisher Labs and is credited with being a major force in the development of the Fisher Gold Strike, Coin Strike, and ID Edge detectors. The Tarsacci MDT 8000 is a different detector in that it is employing time domain processing in a selectable single frequency detector. This is in addition to the frequency based phase processing typical of most single frequency detectors, and so the MDT 8000 is being referred to as having multi domain processing, or as the Tarsacci website calls it, Mixed Domain Technology. This means the MDT 8000 has some unique capabilities and operating characteristics compared to nearly all standard single frequency detectors on the market today. The method employed is unique and currently has a patent application pending. In particular, the MDT 8000 features completely different controls for handling ground balancing, and also what it refers to as a salinity balance control. Multifrequency detectors usually handle the compensation for ground and salt mineralization as an under the hood process beyond user control. The Tarsacci MDT 8000 gives you the ability to ground balance with one control, and compensate for salinity and other low conductive issues with a separate control. In a nutshell, this unique ability is what makes the MDT 8000 different from other metal detectors available today. See the owner's manual link below for details. November 2020 - It had been firmly announced that a 12” elliptical DD accessory coil is under development, with availability sometime in 2021. The price is projected to be under $400. Tarsacci MDT-8000 metal detector From the Tarsacci MDT 8000 Owner's Manual: "The Tarsacci was developed under the premise of mineralized dirt. There is a wide variance of minerals around the World. As such, performance may be gained (in many cases) with "Black Sand" and/or "Salt" Mode(s) invoked, even if local dirt conditions do not contain black sand or salt. Finding a few deeper targets; then experimenting with the Black Sand and Salt Modes on these deeper targets, can be a real eye-opener. For example: a combination of natural graphite (a form of hot rock) present in mineralized magnetic soil. In this case, find a piece of native graphite. Using the salinity balance function, balance the detector to it: then ground balance the detector. With a proper salinity balance setting, the graphite will no longer exist to the detector and the targets ID and detectability range, in graphite presence, will be greatly improved (unmasking more targets). Depending upon local conditions, the Tarsacci can use the conductivity of the wet-salt to enhance overall depth performance. This is to say; there may be cases whereby buried wet-salt performance presents better results when compared to air-test performance. It is also common for the conductive wet-salt to increase depth performance too much; subsequently, lowering the Sensitivity a few points becomes a 'stability' requirement. Remember: The intended purpose of balancing the Tarsacci to "Salt"...… is to generate a condition whereby the Tarsacci no longer sees the wet-salt; unlike conventional detectors that must phase-shift out/compensate for the wet salt. If the Tarsacci sees/uses too much of the conductive properties of the wet-salt, the unit may become unstable; hence, zero the salt via "Salt" balance. Use this function wisely and to your advantage. If the volume of salt becomes too conductive (i.e.: submerged in salt water) it may also become a requirement to lower Sensitivity in order to bring excessive (unstable) depth performance back down to maximum (stable) depth performance." Tarsacci MDT 8000 control panel and display Technology : Mixed Domain (Patent Pending) Operating Frequency : 6.4kHz/9kHz/12kHz/18kHz Ground Balance : Manual / Fast Auto Tracking : Yes Black Sand Mode : Yes Salt Mode : Yes Salinity Balance : Manual Salinity Level : 0 to 50 Target Identification : Ferrous -30 to 0 / Non-ferrous 1 to 30 Sensitivity : 1 to 9 Threshold Level : -9 to 0 Target Volume : 1 to 15 Target Tones : 4 Tone Break : Ferrous and Non-ferrous with adjustable notch filter Audio Modes : All Metal / Discrimination / Mix Audio Output : Speaker / Headphones Display : 128X64 Graphic LCD LCD Backlight : Yes Battery : 26650 Rechargeable Lithium-ion battery (3.7V @ 5000mAh) Battery Life : Up to 18h@6.4kHz/24h@9kHz/30h@12kHz/36h@18kHz Operating Temperature :-10C to +50C (+14F to +122F) Search Coil : Tarsacci MDT 11” x 9” DD Optional Coil : 12” Elliptical DD for release in 2021 Shaft : Telescopic 3K carbon fiber with molded 3K carbon fiber “S” rod and armrest Length : 965cm to 1346cm (38” to 53”) Weight : 1280g (2.82 lbs) including the battery Waterproof : IP68 (Up to 1.5 meters for up to 30 minutes in still water). Headphones (Included) : Wired 3.5mm non-waterproof Tarsacci Company Website Tarsacci Metal Detector Forum Tarsacci MDT 8000 Owner's Manual Tarsacci MDT 8000 Quick Start Guide Tarsacci MDT 8000 Usage Notes, Part 1 Tarsacci MDT 8000 Usage Notes, Part 2
    1 point
  8. The Fisher F22 metal detector was introduced in 2015 and is still in production. It is a weatherproof 7.69 kHz VLF metal detector aimed primarily at coin, jewelry, and relic detecting. "The F22 is a fully weatherproof, easy to use turn-on-and-go metal detector. It has superfast retune speed with excellent target separation and easy to use Discrimination, Sensitivity, Notch and Pinpoint features. Fe-Tone® adjustable iron audio allows you to set the volume of ferrous targets lower than the volume of non-ferrous targets for increased clarity on desirable targets. Easily identify buried targets with the 9-Segment Target Categories and a 0-99 numeric Target-ID enhanced with 4-Tone Audio-ID System. Custom made to allow users to set their own tones. Go ahead, get it wet! The F22 can handle almost any environment!" Source: Fisher 2016 catalog Fisher F22 metal detector Fisher F22 control panel Fe-Tone® Adjustable Iron Audio 4 Modes of operation 9-segment visual and Numerical Target-ID Adjustable Sensitivity and Volume Static Pinpoint Notch Discrimination System Large 2-Digit Numeric Target-ID Numbers, 1-99 Iron Identifier Icon Non-Volatile Memory Saves Settings Ultra-lightweight Only 2.3 lbs. Operational Weight 7.69 kHz Operating Frequency Operates on 2 AA Batteries 9-Inch Triangulated Concentric Elliptical Waterproof Searchcoil Official F22 Product Page Fisher F22 Owner's Manual First Texas (Fisher) Metal Detector Forum
    1 point
  9. The Fisher Coin Strike metal detector was introduced in 2002 and was discontinued in 2006. It is a 6.2 kHz VLF metal detector aimed primarily at coin, relic, and jewelry detecting. "The I.D. detector of the future is here! The Fisher Coin Strike brings you a new level of performance and features that include fast automatic ground tracking, a precision auto ground balance system, four-tone ID system, programmability and our new D.P.A. (Digital Phase Analysis) technology. Throughout this operations manual, we are going to explain to you the controls and LCD Display Panel of the new Coin Strike as well as give you a few tips to get you hunting. As with any new detector, we strongly encourage that you read the entire operations manual and call your local dealer with any questions. The Coin Strike control panel and LCD display is designed to give you constant control read out. In addition, the Coin Strike provides a 4-tone audio system to give you more target information." Source: Coin Strike Owner's Manual Fisher Coin Strike metal detector Fisher Coin Strike control panel New D.P.A. Technology© Fast, automatic FisherTRAK© ground-tracking system Extreme depth and I.D. accuracy High resolution numeric I.D. readout Visual precision pinpointing (linear numeric readout) Precision auto-ground balance system Accurate Numeric I.D. in both ALL METAL or DISC mode Notch Discrimination (Foil, Nickel, Tabs, Zinc) Numeric I.D. averaging function control 3 modes of operation: true ALL-METAL motion mode, DISC mode, & all-metal PINPOINT mode (non-motion) All new digital I/O --- keypad and large LCD with constant control read-out 4-tone audio I.D. system (IRON, FOIL/NICKEL, TABS/ZINC, COPPER/CLAD/SILVER COINS) Programmable interface: last-setting, favorite-setting, and factory preset memory features High resolution Iron Discrimination Salt mode for beach hunting - Splashproof control housing Lightweight with cushioned armrest & grip Hip-mount configuration 3-piece handle Limited Lifetime Warranty Fisher Coin Strike Color Flyer / Specifications Sheet Fisher Coin Strike Owner's Manual First Texas (Fisher) Forum
    1 point
  10. The Tesoro Vaquero metal detector was introduced in 2004 and ceased production in 2018. The Vaquero is a 14.5 kHz VLF metal detector aimed primarily at coin, jewelry, relic, and gold nugget detecting. "The versatile Vaquero is an all-around detector designed to do just about anything a detectorist could want. Named after the Spanish word for “cowboy,” the Vaquero lives up to the hard-working, take-on-the-tough-jobs reputation that made cowboys in the Old West famous. What enhances the Vaquero’s versatility is its 3-3/4-turn manual-adjust ground balance, which gives the detectorist the capability to set up the machine to suit mineralization conditions and personal treasure-hunting style. We’ve also added an ED180 discrimination feature for filtering trash from treasure, a push-button pinpoint for easier digging, and a VCO-style all-metal operating mode—features that give the Vaquero its “do anything” power. With a weight of just under 2.2 pounds, the flexibility to use any Lobo SuperTRAQ or Tejón accessory coils, and its lifetime warranty, the Vaquero is the ultimate go-anywhere treasure tool." Source: Tesoro 2007 catalog Tesoro Vaquero metal detector Tesoro Vaquero control panel MicroMAX Design VLF 14 kHz Frequency One Drop-in 9V Battery Variable Threshold 3 3/4 Turn External Ground Balance Ultra-lightweight Design 9x8 Monolithic Coil 3-Piece Knockdown Pole Limited Lifetime Warranty Operating Frequency 14.3 kHz, 14.5 kHz, 14.7 kHz Searchcoil Type Monolithic (Carbon Fiber) Searchcoil Size 9 x 8 Searchcoil Family Delta Cable Length Approx. 3' Audio Frequency Approx. 293 Hz or VCO Audio Output 1 1/2" speaker and headphone jack Headphone Compatibility ¼" stereo plug Weight (may vary slightly) 2.2 lbs Official Tesoro Vaquero Product Page Tesoro Vaquero Owner's Manual Forum Threads Tagged "tesoro detector" Tesoro Metal Detectors Forum
    1 point
×
×
  • Create New...