To use the Miller Table you need to classify. My demo video the gold was much larger than the con I was running. The demo was just to see how well the gold was sticking. The very fine gold would need the water flow much slower to capture the fine gold. You will need to classify and run like 30, then 50, then 100 mesh. What I do in the field is classify down to like 1/16" mesh, throw it on the table to capture the bigger gold then save the con for a later day to capture the fine gold. I have a small tray under the end of the table. It is angled backwards to capture the con but allows the water to spill back into the black tub. When it become full I remove the tray and dump the con into another tub. This method seems to work for me as I do not want to spend hours in the field chasing fine gold when I could be dry washing, running the trommel, etc. During the video I was adjusting the angle and water flow trying to find that sweet spot. There was some really small fine gold laying on the mate. I did find some very small fine gold about half way down the 36" table and this was due to adding to much con too quickly. Again it’s a learning experience in figuring out what works best for different size gold being captured.