Jump to content

Detecta

Full Member
  • Posts

    24
  • Joined

  • Last visited

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Everything posted by Detecta

  1. I have a Quest X Pointer Max too and really like it except for the hard to push buttons, but something I can live with also and plenty loud. If it keeps going off in boost turn on with pointer touching the clean ground with no metal and it should ground balance it. You might lose a bit of sensitivity.
  2. No, you imagined wrong. low and slow is my style regardless of the weather otherwise your wasting your time. He's doing a review then detects like that and blow's everything out the window.
  3. He would have found a lot more if he'd slow down his sweep speed and lower his coil.
  4. Looks like a hinge off a folding wooden ruler.
  5. The Unabridged Zip Zip is the first two books combined, edited and updated for the new millenium.
  6. Your going to have to keep pausing the video to read it but it's free.
  7. I own a Whites GMT and found it very helpful.
  8. Here's an interesting point about the Deeptech Vista X I found on Dankowski Detectors Forum. JCR [ PM ] Re: Minelab Equinox owners - Question New October 12, 2021 09:34PM Registered: 2 months ago Posts: 33 Not Minelab or Equinox related but to Tom's EMI observations; on Steve H's site there is an interesting discussion on the new Detech Arrow coil. This is intended to be an updated Bigfoot/Cleansweep type coil. It was stated that the original Whites Bigfoot for the DFX had a figure 8 coil winding that gave the coil very good EMI mitigation. Also the polarity of the windings were different than "normal". Maybe some of the looking back Tom is doing? Also it was mentioned to me by someone who should know that the Deeptech Vista X uses a reversed polarity for it's coil & that is a big part of it's high resistance to EMI interference. It would be great if the answer to the EMI problem was fairly simple but just overlooked.
  9. The sole purpose of two triggers is for left and right handed people. I can't see that causing any glitch if nails have been properly discriminated out. I've never had a iron nail high tone. Turn your primary disc up to disc out all nails.
  10. As an example, Find's Treasure Forums has a Deeptech Forum which doesn't get much attention, it's a pity. I use a Vista X and find less junk with that than my Equinox and the simplicity of the X is a pleasure to use. I just crank my main discrimination up until it can still pick up a Threepence and it will pick up every other pre decimal coin I'm looking for and I've never dug a nail they don't exist with the X. Turn the disc up a touch over 40 and you knock out aluminium screw caps but loose Threepence's, that's OK if there's to many screw caps. If you get a loud high tone lift the coil a foot off the ground, if it's still reasonably loud more likely a aluminium can. Vista X is like my Tesoro Cibola but on steroids.
  11. You will have to wait for the release of the GPX6500D (Discrimination)
  12. A tappered pick handle doesn't have a wedge in it, the pick is mean't to stay on by friction once you hit it down on a hard surface a few times. Get a wood rasp and take off all the high spots till you get a snug fit ALL around the handle in contact with the pick head. No oil to make it slippery.
  13. Social media, never been there and never will go there.
  14. Once you enter the ocean you become part of the food chain.
  15. The cheapest way out is to place a rubber washer under the GB knob.
  16. Phrunt, try a master reset to see if it makes any difference to the sensitivity.
  17. What you got there is rare Crystalline Gold. Worth more than it's weight value. Don"t dolly that up. A real collectors specimen. How big is it.
  18. This bloke does a test on nails at 11:12 in this video. with F2 update.
  19. I would soak it in sulphuric acid for 48 hours + to dissolve all the impurities and be rewarded with a masterpiece. Flush under a tap well when finished.
×
×
  • Create New...