Jump to content


  • Posts

  • Joined

  • Last visited

  • Days Won


 Content Type 


Detector Prospector Magazine

Detector Database



Everything posted by Tiftaaft

  1. While I wait for availability of the 10x5 Coiltek, I decided to make myself feel better by constructing an interim solution. Good ergonomics, runs quiet and stable, great depth and separation. Almost like it was designed in cooperation with the Equinox for optimal operation. 😉 ~Tim
  2. The area that the bricks are located is evidently an old dump area. The ground is uneven to start with, and not covered with turf. There sometimes is a depression where I removed the brick, but the ground is pretty easily leveled. There are a bunch of broken bottles and other trash in this area as well. I think they tore down the old school and just dumped the excess debris on the edge of the field into a shallow pit. I would love to see what it the area looked like back in the "operation" years. Now it is just a vacant field of wild grass and wild flowers that the city mows down every 3 to 4 weeks.
  3. As I continue to spend my after-dinner strolls to the old school grounds with detector(s) in tow, and finding a 3rd War Nickel in the process - I am hoping to complete the quest at this site with the last item (IHP). Honestly, I am digging any repeatable tone at this point, but tend to get my hopes up when I see something in the high teens/low 20's (which are becoming more and more rare). Interestingly, old Texas Diamond red bricks give a solid 17-18 on the Equinox. Having committed to the dig by the time I identify the brick (usually 7"+ deep), I decided to clear the discovered bricks in hopes they are covering a more desirable target below. But alas, so far not the case. On a positive note, I am about 1/2 way to a nice brick shed for my detectors at this site haha :D.
  4. It is a very interesting thread GBA, and as you said different to each detectorist. I know some turf hunters are dedicated to the silver count - or relics. Beach hunters tally in terms of "rings" and some by only "gold rings" as the silver ones are "bling" haha. Value, as you mentioned, is another measure. To each their own. The comparison between silver dimes and gold by weight definitely puts things into perspective. I have some work to do before matching a gold ozt in silver coins.
  5. Hey, sometimes a day of digging iron is what the ground gives you! (I have the rusty horseshoe and railroad spike from last week to prove it) 😄 I agree, the sample size is too small to use as empirical data. I hope I am wrong (most likely I am) as falsing on iron probably was well vetted by the CT team. I was thinking that throwing in a few deep iron signals on each "pass" could identify how each coil treats a deep non-ferrous item is a good suggestion you made, especially if one ID'd as ferrous and the other as non-ferrous or vice-versa. Of course there are always the variables of approach angle, swing angle, swing speed, and other man-made (at least this man) inconsistencies from one path to the next. I will say that I have spent a lot of time (probably at least half of my total swing time) with the ML15 on the 800 since purchasing it... I know that machine and coil as well as any I have. The CT "feels" different... just trying to figure out how to use that to my advantage. 👍
  6. Thanks El Nino! For future tests and hunts I will try to get more adept at running my GoPro. Interesting thought on larger items... I'll pay attention to that when I have them out again. ~Tim.
  7. Thanks GBA. I only targeted non-ferrous on this test... but good comment, marking targets on the ferrous side of the scale is another telling test. I think that would be a good test running F2=0 as well.
  8. I spent a few hours yesterday with some Mano a Mano testing on the ML15 and the CT15. Disclaimer: This is what I observed in my testing, my ground, my occasional surmising, and feedback from the targets I marked. Your results will most definitely vary. I am not a scientist, nor an engineer... just a guy trying to find the best way to use the equipment I have. I am also not trying to speak poorly of either coil - as both have merits. I ran both coils with the exact setup - including noise cancel setting (it took me a few times to get the same setting though they were pretty close between the two) and pumping for the ground balance on the first coil - resulting in 0, then ensuring same on subsequent coils. Park 1, 50 tones, Horseshoe, Recovery 6, F2=6, Sensitivity 20. I marked 10 targets with the ML, then followed the same path with the CT and marked any additional tones. Then went through the process again starting with the CT and followed the same path with the ML marking any additional targets. Targets ranged in depth, wanting to better understand the VID comparison at varying depths as well as the sheer depth from each coil. Unfortunately, nothing spectacular for the virtual finds table (I guess I need to tag along with Gerry to his silver fields :)), but I wasn't expecting anything but some results I could use on other locations. Without diving into the details of each dig, what I found was: Both coils have similar depth in my ground, which is also to say - neither coil is deeper than the other - at least in the targets I tested. I found the audio feedback to be very similar on deep targets. One specific target was a piece of smashed copper tubing that was 15" deep (I'm lucky this ground was conducive to digging), and gave me a similar faint-ish signal bouncing between 17 and 20 on both coils - (quarter for size reference): I mentioned this in my earlier post - I am finding it more difficult to pinpoint the CT coil, as I don't think the hot spot is centered on the coil.. more testing needed. But using the wiggle back method works, as long as there are no other targets under the coil (which is 3" wider than the ML obviously), especially on the deeper, more faint targets. I have some initial ideas on how to approach pinpointing with the CT, having swept over the ML targets with it... but again, I need to do more testing to verify my thoughts. ID's are somewhat equal on each coil with one exception noted - the CT coil seems to false on rusty iron more than the ML. Again, this was one test run, however in my test method listed above, I found 4 additional targets with the CT following the same ML path... all were repeatable (one way... which is the fall back to keep from digging iron I understand) and ended up being bent nails when dug - and this was in F2=6... if I was running F2=0, this may have been a different story - more testing needed. When I started with the CT on fresh targets, the ML didn't find any additional targets, and 3 of the CT targets ID'd as iron with the ML. One wheat seemed to hit a little harder on the ML (9"), but I was going by memory, and the swing path was most likely slightly off... so difficult to tell. Both coils gave me the "dig" tone and id. It should not go without mentioning (again) the weight of the CT coil is noticeably heavier than the ML. I will most likely feel the effects of that if I were to spend a long day detecting with the CT. I am also interested to see what it feels like in the water - hopefully a trip to the beach soon to test it out. So, my first test I was able to target a range of coins and trash at depths between 4" and 9" (plus the one dig down to 15"), both coils accurately ID'd the non-ferrous targets (I recovered several clad coins and a host of copper pennies - including 4 wheats, no silver on this hunt, several ring pulls and square tabs, along with some aluminum trash and 3 or 4 .22 brass casings). Again, one hunt, one guy, non-scientific, my opinions. For my own edification, I will want to continue testing at different locations before I determine if there are any advantages for one over the other. As I led out with - there are most likely merits on both - just want to identify where each of them fit in my hunting. ~Tim
  9. Thanks GBA. Challenge indeed (I put a few pretty hefty gouges in some clad in the process). The ring is from 1985 - I was going to say not too old... but I guess that is still 36 years ago... though could have been dropped at any point since then. Thanks Dog. I think my wife is on to me... she gave me the "side-eye" as I asked her when she wanted to go shopping again... haha. Not yet VL, but I have a feeling if I repaired the clasp, she may be VERY interested in the chain.
  10. My thoughts and prayers are with you Norm. ~Tim
  11. Had a couple hours while my wife was shopping today, so went to a sports field to hunt for jewelry. Glad I did, early in the hunt got a solid 15 on the Equinox at about 6". Texas turf is getting pretty hard packed by this time of year, so digging was tough, especially working to leave the field the way I found it. Out popped 14k class ring. I was happy to see a name on the inside, and with a little research located the owner. Unfortunately, since passed away, but I will try to reach out to the family to return it. My first gold of the year, and my first class ring. Separate signals on opposite ends of the field, I got similar 12-13 signals, and pulled silver from each... first the chunky chain marked .925, then the child sterling cross. Also a pocket full of clad including a Martin Van Buren $1 Coin. All in all, a good day. ~Tim
  12. I don't mind a little marketing inside an informational post. It isn't like KellyCo is hiding behind a shill user ID, pretty obvious who they are. As long as I can speak my opinion from my experience in response to an infomercial thread (as I, and others did by discussing products that KellyCo doesn't carry), no harm/no foul. ~Tim
  13. I agree GBA. But if you are in the right location - the weight and curve of the blade are tremendous - pulls a perfect plug that is easily replaced and deep enough that there are no issues with a dead plug. My other two "go-to" digging tools (other than a screwdriver) are Lesche (standard Lesche digger, which is always on my belt; and a T-handle Lesche straight edge shovel for non-manicured locations - not for fear of damage... that shovel pulls the best plug of the three - but for optics more than anything - I am hoping to leave people with a good impression of metal detecting, not "some guy digging holes in the park with a shovel"). I do my best to work around tree roots rather than cut them. I have found this as well Coinboy - I considered sharpening the edge - but haven't taken the time to do it. Especially when I have the Lesche digger that is exactly what I would be trying to re-create. Oh, and Left Serration Lesche for me... I am not as precise with the right edge serration for some reason.
  14. Not sure if this helps, but the poll threads you referenced have the results at the top.
  15. I should mention my hunting is mostly turf, looks like you are a beach hunter Erik. Abenson and others will be able to speak more to the beach performance... which I will be taking note of as well - as I am planning on increasing my beach hunts this year on the Gulf Coast of Texas. ~Tim.
  16. I have had the Coiltek 15" out a few times. I hope to run some pure comparisons in wild dig settings this coming weekend between the ML 15 and the CT 15. My initial impression after a few isolated hunts, I didn't notice any improvement over the ML, but wasn't running them head to head. I found it a little more difficult to pinpoint, though the wiggle back method was accurate off the front and back of center. I will post my findings when I have some direct comparison results. ~Tim
  17. How about a good old fashioned stakeout? Just remember to have eyes on the site!
  18. Wow! What a haul!! I would agree that the ATX is gelling with you! That and a prime location!
  19. I have only found one of each (Walker and Standing), and they happened to be nestled right next to each other in the hole. The quarter sized ring visible on the Walker. My two favorite designs as well! I am constantly amazed at the amount of silver you pull off the beach. I will continue to live vicariously through your amazing beach hunts. I have a feeling this is your year GBA!
  20. Thanks for sharing GBA, we sound very similar, though your expertise in numismatics is light years from mine. Wishing you a few excellent days and at least one great day at this site when you are able to get out and hunt it. 👍
  • Create New...