relicmeister

I’m set to try out the following:  I keep the WS6 master on the stem using WSA II headphones. The remote is in a waterproof smartphone bag which is fastened to the top edge of my Gray Ghost ultimate catch all. It rests inside and when I need it I pull it up where it rests on top where I can see it and adjust it and where it is secured. I’m using the WSA II headphones when using the remote as well. 

I too have 9” and 11” coils, having started using the 11” only until the 9” became available. I think the 11” is ideal when I want greater coverage first plus depth section. It’s not heavy and works well in any environment. I still use 9” coil 80% of the time. 

I’d hunt farms in VA any time of year under any conditions which I had the opportunity, just  for the potential Colonial rewards it could bring. There is Colonial where we live but I was sparsely populated in the Colonial era making those kind of sites rare. 

Just an aside, the folks that purchase the Deus 2 Master, given that you need the remote to do updates, are they out of luck in terms of updating their WS6 Master? Or borrow someone’s remote to do the updates?    I have the whole shebang so for me I’m just wondering. 

Since I’m using the remote in a waterproof phone “bag” (Yes I know the remote is itself waterproof)attached with a carabiner to my gray ghost ultimate catch all pouch, I could use something wired via adapter, or even use the speaker in some cases the remote being fairly close to ear this way. I considered the WSA II XL but as I’m a big woods hunter I don’t like ear covering headphones for safety reasons. 
As of present With  a single WSA II I can have paired both the  remote and WS6 puck and just share'the one pair of back phones. 

I purchased a pair of WSAII headphones so I could use the WS6 puck on one shaft w/9” coil, and a second shaft for 11” coil mostly using remote ( On the 9” I’ll use the remote at times and the WS6 other times. ) my question is if I bought another WSA II would I pair one to the puck and the other for the remote?  Could both be paired to remote or WS6 puck or both simultaneously? 
I’m confused and would like to know if it makes any sense to get a second WSA II. There’s a convenience to having one for each (essentially) detector. 

I haven’t seen anything about this- does anyone know if we can expect a Deus 2 guide within the next year?  I think the manual is quite good, and lots of informative videos- but I like book form. 

Hi Brad,   I’m really impressed with your grasp on the Deus 2 used in a water setting. ( I’m impressed with your ring count also). But to me it really seems you have it dialed-in for how you hunt. 

On Christmas Day I ordered a Legend PP at the temporary lower price plus a loyalty discount just over $500 tax free. Was excited but guilt got the better of me and I canceled the order the day after Christmas ☹️
   I bought a lot of detectors in the past couple years and must say it hasn’t done anything to improve my enjoyment or finds. The only detector I currently have is the Deus 2 ( w/ 9”&11” coils). I’ve decided to focus on this one machine and just my detecting. I still have plenty to learn on the Deus 2.   
   ……. But it sure would’ve been nice to have a shiny new Legend, lol

Mine will arrive on Friday. From W. Coast dealer. I mostly use my 9” but on bigger sites like fields, the 11” increases my coverage area significantly along with an increase of depth so I wanted the capability. 

It’s nice having so many configuration options. 

Thanks for this clarification. So I am assuming the stem puck mount and the horseshoe adapter are available separately? Are they exclusive Deus ? Or    The same for original Deus ?  
 

thanks again 

I’m confused. Is the master WS6 display different than the WS6 supplied on the full deus2 other than the stem mount and headphone adapter for the headset? My understanding is that with the full Deus 2 you can use the remote as master, or mount the puck on the stem ( with optional stem mount ) but I thought the only option then is wired headphones. Am I missing something?  
I’d sometimes use this way assuming I didn’t have to be tethered via wired phones. 

Glad you like the Deus 2, Tim. I’ve pared-down to just the Deus 2 and it is serving me well. I’ve also made good finds at sites that stopped producing, some of them being great finds. My preferred programs are sensitive full and I’m increasingly using fast. I’m looking for ideas for custom relic programs, as of present I have one- using sensitive FT and the XY screen. Good luck as you use it more and at good sites 

On 7/31/2022 at 10:27 AM, midalake said:

So this morning had everything disconnected and my machine was dead as a doornail. Not even enough battery to power on the unit. Thanks to all who double checked their machines. Will let everyone know how the return and replacement goes.  

So it’s the remote that’s bad and needs replacement? 

Usually I need to hear ambient sounds so I don’t plan on getting these. Being a MD hacker, I might try making removable ear cups for the WS6 to make them sound more like over ear phones. The sound from the WS6 is great, but there are times it would be nice ( like noisy areas) if I find a good way to do this I’ll post the results with photos.  By the way if they ever make bone conduction work in wireless form, I’m all in for that. 

Welcome Tam

Scotland?  I’m sure I have a great many ancestors there as my Dads side is fully Scottish ( my surname is Stewart paternal grandmother, Ogg. ). I need to use Ancestry. Com and trace out my relatives. Anyway, I hope you find someone you can detect with. Anyone on this forum will be glad to answer any questions you have. Good luck with the Deus 2. The factory programs are quite good to begin with. 

I just put my spare essentially new Mi6 up for sale in D-P classifieds. I am keeping one and an Mi4 that I have. As I may have mentioned previously, I alternate between the Mi6 paired and the Mi4 ( which I prefer when there’s a high number of targets. Sometimes I leave it on getting 2-3 targets done before it turns itself off- I hold I. Under my arm Pit so it doesn’t sound off in between.  I I love the xp pinpointers and only use pitch mode. My only issue is with my Mi4 the volume seems a bit  low. I’d use the Mi6 unpaired before switching to different brand. It’s often advantageous to run the coil over the open hole if the PP isnt detecting the target- a quick pass with the coil helps, and you can’t do that paired unless you turn it off/on. 

Before the Deus 2 never took a coin from there, just relics. So far it’s been barber dime barber quarter, a silver Roosie , 3 IHP , V nickel.Same with buttons. Many masked gems waiting. 

Same here connects 3/4 of time 1/4 fail requiring restarting mi6. I keep a mi4 with me when I have many targets cause I can leave it on- it turns off on its own but by then I’ve dug 2-3 targets and just keep turning it on. I leave it on and hold it under my left arm ( pit) where it won’t detect metal and is always ready for the next hole. 

They should replace for you at the price he’s getting for it. 

I just received another Deus 2 accessory- 3-d printed coil centering device for my 11” coil. After having swung the 11” only for the first 2 months and getting along fine, I can say it is a lighter feeling swing, maybe a bit easier on the wrist. It’s definitely noticeable and will help in long detecting runs. I wouldn’t even bother for the 9” coil but for the 11” I recommend it as it is a low cost helpful gadget. 

Thanks. Went back and WS6 decided to turn off on its own. I was able to update. All I need to do now is re-pair to remote and I’m set. 

It’s been a while but I finally got around to updating my original Deus 2 (my 9” 2nd machine was updated some time ago) and ran into a problem I seem to remember some having, where the remote update is done ok, but after powering down the WS6 doesn’t power down as it should, and no matter what buttons are pressed I can’t access the menu in order to update the WS6. The only buttons only adjust volume  and I can’t turn the WS6 off. Do I remember correctly that when this happens all you can do is wait for the power to deplete so they turn off, and then you can turn it on , access menu and finish the update?  
this seems to me the only option unless I’m missing something. ?