midalake

OK Steve, who hired you???? 😁 Or is it just that bad of a long COVID winter???

SO TODAY. I switched from FE-6 to F2-6 for the last hour. I did not see any real difference in operating. It almost seemed F2 let the peso coins wrap around a little more. I will flip back and fourth more this week including on some more non-ferrous hits and see what happens.

I would add. Do a cellphone test close to your pod and see if your pod is effected. Then try the same cell phone test with with the alumn foil. ALSO I am using hard wired headphones!

Well I am not within eye sight of any tower equipment? Did you happen to try different modes? ALSO I am using hard wired headphones! I am hunting the beach here in Beach 2 and that mode is what resulted in my EMI loss with the mod. Might be worth a try to toggle over?

I have been running FE 6 here at the beach. FE 6 stops the wrap around of the ferrous 1-2-and 5 peso coin. Well at least this thread made me look on Youtube on how to find F2. 😄Guess I kind of forgot about it. I was kind of impressed with a Vid by Calabash that showed the F2 cranked up to 9 and there was zero depth loss in his test garden. 😲 Any of you beach hunters using it cranked up???? Does anyone notice better response in moving salt? I really do not dig any iron at FE6. I am out today on my machine and will experiment a little! With running FE6 for days on end now, I should be able to notice any changes quickly. Dave

Wired all the way.

Sodbuster, Start slow just like I did with aluminum foil wrapped around the pod for your first experiment. If it works......then go hog wild. Dave

Ya, watched your vid like 10 times already. You do not understand the issue. At any time the waters edge can be 15 feet away to the ocean and 50 feet past me in 20-40 seconds time. Nothing to SB [just the way it is] Yes, there is lots of tonnage of moving water here! And yes, like I told Dew. The machine really likes to be out of the wash or in the wash. As long as there is 6" or so of water over the coil zero issues regardless if the water is moving [from my limited experience] I don't want the readers to think this is some sort of game changer, rather an issue of concern/caution. One thing I will be a bit critical of is the coil mount location. Lousy, to put it mildly. It is way too easy to tip the coil or have the force of the water tip it for you. The MDT does not take kindly to being tipped, and will sound off when it is in the water [every time] If I had the ear of the designer, this change would be job #1. Dave

When I first turned the machine on in the Condo, saw the OVL on the screen [figured out what it was] While I only have two days on the machine, I agree. There were several times where the electronics got real chatty. I was running blk sand on, tracking off. The condition showed most when a wave was completing it's cycle and washing past me back to the ocean. It appeared to me [at times] the machine just "had enough" enough black sand washing by, enough water rushing, and was making it unstable. Not all the time, but it happened a few times. The fix: Keeping it still for a bit/ and or slowly working up the beach away from repeated wave wash. Even though there was not an audio blackout, I could tell there was a loss of detector performance. Regularly I swing my scoop handle at the coil. If you do this at times when a machine is running clean as opposed to chatty/bubbly/dirty, one will understand the reduced capability of the machine when it is not performing well. EMI has the same type of effect! A machine experiencing even a light EMI pulse will not be working to it's highest potential. You can get this same scenario on the Equinox as well. Without the overload symbol coming on. Dave

I hunted a couple of days ago and forced myself to use all metal. It is OK but the headphones are very inferior. don't think my ears really like the all metal tone. I took my Equinox cable for my Black Widow's and put it into the MDT cable and the !$$#^& headphones won't work. WHY can't all this chit interchange? Surely, the makers know all their factory phones are junk if you are working a beach????? Now I have to chase another audio issue...%$&$$** Dave

Never been a big fan of Coiltek. Hopefully we can get some good test garden results to separate fact from fiction. I will be watching carefully.

Thanks! I took my friends Tarascci out yesterday for the first time. I too liked the mixed mode better. I have LOTS of targets here so all metal can be a pain. Tomorrow, I will give AM a little more go, but I would like to know what you think too. A member here has help me get a good base! Dave

Is that the new 12" coil on it????

No matter what. The most important item for the beach is headphones that kill the outside sound. Minelab yellows do not have that ability. Speakers in phones with -25db and more is where it is at.

Detecting Doodads items are made from Infill, NOT SOLID PLASTIC. They are JUNK!

I have used JB Weld before. But I like the working time of the Marine epoxy better. I also think it is more durable to prolonged salt use. I noticed JB weld would always wear off the bottom of the coil faster. Slower setting epoxies as a general rule are stronger. Dave

Yes it is epoxy. Loctite Marine Epoxy. Step 1 Coat the entire coil protector bottom and sides with epoxy and set into place making extra sure of full epoxy contact. Step 2 Epoxy extra side plates to each side. Step 3 Enjoy coil ears that will never break. Especially when 2000 miles away from home and no where near Minelab service. Dave

ALL yous guys have seen the fix. Don't put a coil in the water until complete!!!

Thanks, interesting stuff! It's not plated it has a 10K stamp. The bands are rose gold. There is very little gold weight. I will get the stone checked when I get back home!

Well it has been a dry spell, but finally connected! Besides the gold stamp there is gcic4 stamped in the ring. Does this refer to the diamond? TIA

There is no luck of the draw. Their are going to be lots of broken coils.

GOTTA pay for those MFG defects!!!

Yes Cal, Duct work tape. Less than $5 roll.

Hey Badger I am 100% positive my EMI was communications equipment. I have been waiting for feedback on Electric EMI. So please post, I guess no guarantees? Thanks Dave

You know this is not that hard! The tape is sticky, not peeled it is not sticky. I assembled it so all pieces touching my cover still have the backing on it!