-
Posts
6,096 -
Joined
-
Last visited
-
Days Won
32
Content Type
Forums
Detector Prospector Home
Detector Database
Downloads
Posts posted by Chase Goldman
-
-
54 minutes ago, GB_Amateur said:
I think that 10 below the Panda stands for 10 Yuan and for a 1986 date that means it contains 0.1 ozt of gold.
Correct, it also says 1/10 oz on the coin which helps avoid having to do the math, too. Not being good at math, I cheated and that's how I came up with 0.1 oz in my previous post.
54 minutes ago, GB_Amateur said:If the bezel is gold alloy, then the gold content found goes up some more.
That would be great, but it looks from the photos to be gold plated brass or some other low value base metal. Also, the 87 TID might indicate copper or brass base, as well. Let's see what CPT comes up with. Nevertheless, gold coin pendant is a great find.
- 1
- 1
-
Fantastic CPT. It's fun to be surprised even after the hunt is over, and gold to boot. Congrats!
Those Chinese Panda Gold Bullion Coins are popular for gold investment and as jewelry pieces like yours. Even though its chewed up, the spot melt price is just over $200 today for that 0.1 oz coin. So great start to 2024.
- 1
-
- Popular Post
- Popular Post
I retired from the rat race in 2023 which naturally opened up a lot more time for metal detecting. I didn't know what to expect for 2023, but I did figure that I would at least get more opportunities to detect which hopefully would translate into more quality finds than in previous years. It turns out that was case, but what really made 2023 enjoyable was not just the finds but the opportunity to try out different things and to hang out more with my detectorist buddies. Especially partnering up with Bob (@F350Platinum) who is just constantly pillaging the Northern Neck of Virginia with new finds and permissions. I was fortunate to meet Bob 3 years ago after he started posting his yard finds on the forum. He was really just starting out and while I knew he was aware of the history behind his amazing finds, I am not sure he realized at the time just what a detecting paradise he had at his doorstep. I know a lot of folks who would consider just about everything he found on his first few hunts as bucket listers because they would not have ready access to detect such historic relic laden areas. As a Northern Virginian city dweller I had little to offer in terms of reciprocation in terms of permissions and sites but I did know detectors and how to detect relics and met up with him to detect and share my knowledge of detectors, history, and relic hunting. The mentor soon became the mentee as Bob's opportunity to frequently detect, his rapport with the local landowners, and his research and IT skills soon lapped my abilities and now I am just thankful we became friends and he let's me tag along with him at his permissions.
Anyway, with that backstory out of the way, on to early 2023. We started out hitting some of Bob's sites that he has had access to for a couple of years. Happily pulling out whatever we hadn't already found or that were turned up in the plowed fields. And as per usual, we ran into one of the landowner farmers who were out and about on their properties. An offhanded comment to that landowner and low and behold Bob made another connection and a potential permission to a farm we had been eyeing for some time.
Off to a new permission and all the excitement that comes with it. We've posted our finds on these sites before so not going to bore you all with that, suffice to say, I found some bucket listers and finds that I have never before recovered including a pipe tamper, a brass men's ring stamped 18K, and a North Carolina CW button and the largest spectacle buckle I have dug (though only partial). Bob snagged A LOT of silver coins from the "front yard" of the home site. It was supposedly pounded previously, but the site was challenging with lots of iron and other junk and we felt that in this case, the latest D2 detector technology (fast recovery, multifrequency) provided an advantage vs. those who had gone years before us, probably with slower or less discriminating machines. We were rewarded and had a great time visiting that site throughout the year and anticipated Fall harvest to access fields that were unavailable to us at that time.
Bob and I attended a group hunt we both attended the prior year that was fun and productive. This year, not so much. Bob managed a CW Eagle button and, I managed...nothing. I was focusing on learning my new Axiom PI detector and also testing out a new smaller coil. I could have exploited some previous minie ball hot spots, but decided to not limit myself and we explored a large portion of the farm. It happens and the Axiom proved itself later at a bigger group hunt in hot soil. That was Diggin' in Virginia (DIV) at a new site that was the location of a running artillery and infantry battle of the Civil War called the Battle of Freemans Ford which was a tactical water crossing of the Rappahannock River. Union Artillery and Infantry units engaged a Confederate supply column that was being protected by a number of Confederate regiments. The Union units were routed back across the river but the Confederates took a lot of shelling from the Union batteries on the high ground across the river. A ton of artillery shell fragments, fuses, sabot, and unexploded ordanance were recovered as well as other typical CW relic items such as plates, buttons, minie balls, etc. Since the site was adjacent to the river, it also contained a number of old Colonial, 19th and 20th century former home sites. I recovered a number of shell fragments, sabot, a fuse, and small arms projectiles with my new Axiom, but one non-CW-period find was my favorite. A 1923 SLQ in excellent condition. Probably dropped exactly 100 years prior. The Axiom proved itself that day and my GPX found a new home with another detectorist.
Over the summer, during the traditional relic detecting hiatus (the fields are planted, the bugs are out, and the sun is high), I did some beach detecting on the Chesapeake Bay and also met up with Bob a couple of times at his local "beach" haunt at Colonial Beach VA. Found some bling and a lot of quarters and yet another beached Sacagawea dollar coin (weird) and generally had a great time soaking up some rays and talking to the local beachgoers. Sometimes getting some more leads to permissions in the general area.
When fall finally came around, we some of our old haunts. Didn't expect too much because the sites had either been minimally productive or we had pounded them to death. In that context of low expectations I had one of my best days ever. Three 1930's silver quarters and an Bob snagged an eagle button, but nothing else out of a traditionally stingy field so we moved on after a couple of hours. The next field we had pounded multiple times but hit the known hot spot areas. We weren't getting much other than lead bale seals until we hit a known iron patch where we started pulling out various old flat and ball buttons and other pieces of brass. I then finally pulled an unfamiliar two-piece button with an anchor on it. I knew it was some sort of Navy button or possibly even a civilian decorative button until I did the research and found it to be a British Naval Officer's button from the late 1700's to early 1800's. In context, it makes sense. The area was raided by the British during the war of 1812 and also there may have been colonists who were former British Naval Officers who lived there. Anyway, for me this is a bucket lister in the sense that it is potentially linked to British military action in the area during the war of 1812. I also got to detect some sites up north in central Virginia, Pennsylvania and Maryland and scored some silver, copper, brass, lead, and pewter Colonial spoon bowl.
Bob got some additional intel regarding one of our sites about a potentially unexploited former home site. It was in a field in which we did not have previous access due to crops. When the crops were finally harvested, Bob let me know, we met up and we "attacked" the area and were successful in finding the site. We hit that area twice and it was very productive. Bob got a 1798 Largie (a bucket lister for me is recovering ANY pre-1800 minted US coin, silver or gold would be a bonus). I was very jealous of that because even though I was seemingly pulling relics from the ground at will, I could not get my coil over any coin. Regardless, it was a great couple of outings and stood out to me because of the sheer number of relics but also because, even though I was not able to snag a coin, I was able to snag silver in the form of a very old, patterned cufflink.
We capped off the year with a hunt at an initially promising new site that coughed up a number of colonial buttons, some oddities (including an unexpected Eagle GS button), and we each somehow managed to snag Merc's in the same area to finish off the hunt with some silver, which is always nice. My final hunt of the year turned out to be the capper for me, and hopefully, a sign of good things to come for 2024. It was an especially good year for silver for me. At least 4 silver quarters, a number of silver dimes, a silver 1840 Seated Liberty half dime (my first), and the silver cufflink. We hit a field that had iron but had only given up a few keepers. I noted to Bob that I was not ready to give up on it, though we both had low expectations based on our previous visit there. Bob and I started to hit areas that we had not detected previously and hit the iron patches hard. A few brass relics started to pop and then I hit a solid 91 that did not waver even after I did a 360 turn. I thought to myself, well at least I am going to dig a silver or clad dime. I flipped the plug, pinpointed and flipped out some more dirt and silver DID pop out of the hole, but not what I thought it was going to be. I thought, wow its a quarter or half, by sight, but that didn't jive with 91 TID. I looked closer at the coin design details and realized that I just popped my first 2 Reale Spanish silver - 1793 King Charles IV (stamped as Carolus IIII on the coin) with a Lima, Peru mintmark. If that coin could talk and tell the tale of how it ended up in a Virginia farm field, I would have loved to hear it. Called over to Bob, and even though it was only 10am, told him my hunt was over and I was going home because I knew I couldn't top it for the year, much less for the rest of the day. I might have dinged it with my digger, but in my defense, I thought I was recovering a dime. It happens. I stuck around though, for the rest of the day, and we pulled some more brass and then called it a year!
In 2024, my quest for my ideal VLF IB detector has pretty much ended with the Deus 2. I still dabble with other machines but if I am serious about the dig, it's going to be the Deus 2. ALL my quality finds this year were recovered with the Deus 2 or the Axiom.
Thanks to Bob for some great detecting adventures and friendship!
Goodbye 2023, had fun. Hello 2024, can't wait! Wishing everyone great digging in 2024.
- 28
- 1
-
2 hours ago, HardPack said:
I would suspect in higher mineralized soil types sensitivity adjustments would have a proportional impact on detection depth…
It's not proportional. The sensitivity to depth relationship is non-linear. It plateaus (i.e., the steepness of the curve significantly decreases) at sensitivity levels above 22 or so in my experience.
- 1
-
Bob - The ring, lock, and that dome button were all individually visually interesting and great finds in their own right because they each infer an interesting story in our imagination of how they came to be where you found them.
All I can say is thank you for the hunt today a great wrap to the year and when I get a chance I’ll provide a recap on the great time I had not only today but this Fall and past Spring hunting Virginia’s Northern Neck with you and some of my other 2023 mid-Atlantic state detecting adventures. Looking forward to more adventures with you in 2024.
- 3
-
Like it says in the email, call the repair center direct line and someone may tell you or @Keith Leppert may have some additional insight.
-
Welcome to the forum SR. Sent you a PM. But might be helpful for you and others lurking to publically share with the forum some background information so we can give you the best recommendations and advice.
First what general region of the country are you going to detect in? This helps us better understand your detecting environment. (Inland, beach, mild or mineralized soil, lawns, fields, farms or woods, etc.) Certain detectors do better than others in different environments.
Second, it would be helpful to better understand what specific type of detecting you are most interested in as the various “types” of hunting require different approaches, detectors, and recovery tools. For example, are you interested in park hunting for coins and jewely, hunting private property (residences or farms with permission) for coins, jewelry, or historic relics, salt or freshwater beach hunting, or hunting for gold/meteorites?
Finally, related to the above, it would be good to know why you have already narrowed down your detector choice to the Deus II and eliminated others from consideration. The Deus II is an excellent and versatile multipurpose detector with great ergonomics. But it is also an advanced detector with a learning curve and a significant investment. Just want to make sure you’ve set realistic expectations on how this is all going to go down. Have you accompanied others on detecting outings firsthand or know of a local detecting club or have you only been exposed to you tube and TV detecting which edits out the hours of futile swinging and pouches full of trash you will inevitably encounter? And that’s if you’ve been fortunate enough to have detectable public sites or have been personally granted permissions or invites to desirable private sites and have done the research to know where it’s both promising and legal to detect. Not trying to be a Debbie Downer, just keeping it real. Metal Detecting Enthusiasts are all subjected to these downsides and challenges, regardless of skill or experience but are hooked nevertheless by that one great find of the day and the promise of the next one to come.Welcome to the obsession and standing by to help you dive in.
- 7
-
16 hours ago, Digalicious said:
I don't own a 900, but if you're getting a lot of true iron falsing with that low of an iron bias, I don't see what else you can do other than raise the iron bias, or dig it up to see what's going on.
Bingo.
15 hours ago, HardPack said:The iron falsing drops off with the EQX 900 “iron bias” at the max settings but is not eliminated. With all coils Recovery 4, Iron Bias 1 at GB 40 seems to work best for depth and separation on test targets. With the 11” coil a clad quarter TID adjacent to a square nails is pulled down to 52. Outside the iron test area, except for nickels, the two smaller coils are unable to detect 6 inch deep coins in a granitic clay soil; none of the Nox coils have detected the 6” deep memorial penny. (side note: within the iron test area & out, the XP Deus with 9” X35 at 12kHz detected all ferrous & non-ferrous test targets at depth).
FWIW - With the 900, I would personally up recovery speed from 4 and set the iron bias to max and back off on sensitivity to 20 or less to minimize falsing as much as possible in thick iron and see if you could cherry pick at least some shallow non-ferrous out of the iron muck recognizing you are just going to lose depth on deep non-ferrous regardless. I mean in thick iron, depth is pretty much out the window due to falsing, masking, and target ID down averaging, so one of the first things I do in a thick iron patch after upping recovery speed is lowering sensitivity, the filters never really do much. I know your test garden is showing you some potentially “optimal” settings but your test garden can’t really replicate all the myriad of real world 3-Dimensional ferrous to non-ferrous target spatial orientations, soil moisture conditions, and old target halo effects that can result in masking and falsing at your tough mining site.The Deus might be a better tool in the thick stuff as well. I would tweak Silencer up or use Goldfield with mild IAR unless the soil is very mineralized (in which case I would set IAR to 0) and again lower sensitivity to focus on unmasking shallow non-ferrous.
None of the iron filter features on the peer detectors mentioned (Manticore, Legend) or Deus II are really going to work any miracles in your situation over and above your Deus and Nox 900.
If neither detector is pulling non- ferrous out of the iron patches with these tweaks, it might be time to start the tedious process of scraping and removing iron.
Good luck in any event.
- 5
-
2 hours ago, F350Platinum said:
Ordered a new port cover, the best thing about these detectors is you can literally build one from parts. It would be more expensive tho. 🤪
Totally agree with all of the above, I think this whole experience is of value to anyone with a Deus 2. 🙂
Yep. Thanks again for posting. You mentioned a very important point earlier as well, specifically, communication. I don’t think many of these repair centers realize the importance of comms and how much value there is in simply keeping the customer electronically informed of status. In this case, lack of a heads up email or text stating the repair was complete and shipped out with a tracking number and notification regarding requiring a receipt signature delayed receipt of the repaired unit at least an additional day because Bob had no clue it was arriving and was not available to sign for it or to leave alternate delivery instructions with the carrier. Something else others dealing with XP repair need to be aware of.
- 4
-
13 hours ago, F350Platinum said:
It's not an egregious thing that they didn't replace the plug despite the obvious wear, I'm merely pointing it out because I would have done that while the back was open. This is coming from 30 years of repairing and directing repairs of computing devices. 😅 Perhaps it's an unfair standard.
Yes, not egregious but it definitely would have been nice if they did it all at once while the unit was already opened for the connector repair, because you do want to minimize disassembly on watertight cases.
Not sure if you mentioned the fact that the port cover was worn in the warranty repair request form (even though it may have been visually obvious), but for those who might be in a similar situation, never hurts to explicitly mention such things so as to not leave them solely up to the discretion of the repair technician and let them also tell you explicitly whether or not it's covered by warranty. That way you up your chances of getting a freebie proactive replacement or can decide whether you want to pay for the non-covered repair while the unit is already in the shop.
After many such electronics warranty repair experiences (primarily phones), I have learned to be annoyingly explicit in my repair expectations with these repair outlets, especially warranty repair where they are motivated to do only the absolute minimum necessary to satisfy the conditions of warranty.
I know the remote is definitely going to outlast that plastic port cover as you have to unscrew it EVERY time you charge the unit as well as when you plug in wired phones. It's also easy to cross-thread which shaves a little more plastic off each time. It's all very annoying but I guess it comes with the territory on these watertight/dust tight IP compliant electronics. Nokta went with a metallic screw-in port cover and wire retaining lanyard on the Legend's control pod headphone/charging/data port. That might have been a better design move in this case, though it also can subject the connector threads to wear. No perfect solutions, I guess.
- 2
-
On 12/26/2023 at 1:54 PM, F350Platinum said:
Hey y'all,
Want to tell you about my first repair experience with XP repair in Shrewsbury MA.
Some background, one of the pins on the charging cord broke off in the center hole of the DIN jack making the RC difficult to charge. I bought a second RC fearing a long wait to get the first one repaired, and while it did take a short while I would have missed out on a couple of great hunts. I'm really glad I have two now.
I called the repair center on the 12th of December (1-800-933-2897), printed the forms they sent me, packed it up carefully and shipped it insured for $1,000. Total for shipping was $25.15, $20 of which was for insurance.
I would have received it on the 23d of December but I was out hunting, they did not send me any shipping notification so UPS could not get a signature. I finally got it today.
I can certainly tell it was the one I sent them. 😅
The returned form says they replaced the charging port, it does look new, but although I hate to be picky they could have replaced the charging port cover as well. 😠 It's getting worn out and will cost me an additional $11 to replace. I'd have to remove the speaker grille to do it which might void the warranty.
11 days isn't bad, the remote functions as it should so far, and it was not initialized so my programs are still there. My only concern at this point is I hope that they did not compromise the IP68 water resistance, and that I can still dunk this sucker.
Maybe I'll use the new one for that 🤔
Bob,
First of all, thanks for the warranty repair report. It's good to do these for the benefit of everyone else who might have to eventually follow down this path so folks know the process and policy details regarding send/return shipping costs which vary across the board and how long to expect to be without their gear, etc. Encourage everyone to post their experiences in this regard.
Couple of thoughts from the peanut gallery...different perspective. Maybe they will help allay some of your post repair concerns or not but thought I would share with the forum anyway.
AFAICT - the port cover is not there for watertight integrity but simply to keep dust, debris and salt residue out of the connector (which I would recommend flushing with fresh water after a salt water hunt). So it's good to have but not essential. If it actually wears out, I probably wouldn't bother replacing it or might just get a replacement port cover and not bother with disassembly to attach the lanyard. You could also see if they would replace it under warranty if it can no longer perform its intended function but the cost to send it in and insure it, etc is probably not worth it. It's most likely considered a normal wear and tear item which is not covered under warranty anyway and might explain why they did not touch it during your repair, unfortunately. Would have been a nice touch if they replaced it.
If they screwed up the watertight integrity of the remote due to the repair, they would still be liable for warranty repair if the remote is subsequently damaged due to water intrusion. As a result, I would think that they would be motivated to do the repair properly and restore it to IP68 compliance. I'd personally want to know that sooner than later and would use the older remote for water use rather than subjecting my new remote to water hunting abuse, in any event.
Anyway, glad you got it back mostly fixed and have the peace of mind that comes with having a backup.
HTH
- 2
-
19 hours ago, midalake said:
The current D2 coil at 8 3/4" is not small enough?? The Detector with the best separation values in the world. Not knowing any better, I might think it was April 1st. Or do they need to make a 3" coil?
Since we are talking about a DD, this really has little to do with separation other than if there are multiple targets under a coils footprint, you may get some edge interference from targets that are detected at the edge of a coil and the smaller the footprint, the less chance of that happening in areas where you have high target density. There are advantages to DD elliptical coils in general and small ellipticals in particular versus round coils. The narrow width allows more side to side swing room when in tight swing situations such as brush or cornstalks as mentioned several times previously the longer length provides for more swing coverage that a round coil with a diameter the same width as the elliptical. For example, a 10x5 affords more side-to-side swing ability than a 10-inch round coil when there is less than 10 inches of swing room. It also provides the SAME amount of swing coverage as the 10-inch round, and if you use Geotech's rules of thumb for detection depth vs. coil size, a 5x10 elliptical has about the same depth performance as a round coil of approximately 6.3 inches in diameter. In the linked Geotech post there is a chart that shows the optimal target depth for a coil at 10 inches diameter is about 5 inches (not maximum detection depth) and for a 6.3 inch coil it is about 4.75 inches. In fact, Geotech's post which references some insights by Eric Foster discusses the pros and cons of small and large coils beyond just depth and might be a useful read for those who are interested this Deus II coil discussion.
- 4
-
34 minutes ago, Dirtshark said:
I will be looking for headphone alternatives though. I know there is one or two aftermarket headphones that will work so I might do that. My piggy bank is empty now tho....lol
Glad your are enjoying your new Deus 2.
The beauty of the Deus/Deus 2 modular platform is that there are a LOT of configuration options - a lot more than just one or two aftermarket headphone choices.
You can go with your current full up remote and wireless WS6 puck/backphone configuration or you can opt for several different options with the WS6 Puck as alternatives to the backphones:
You can get a wired headphone adapter plate (about $20) that slides onto the WS6 puck and then plug your favorite wired phones (you can use your existing Legend wireless headphones in wired mode using the included wired connector) plugged into the puck to run untethered from the detector by just slipping the puck into a pocket or you can get any of several puck mounts/holders that enable you to strap the puck on your wrist or strap it to your belt or a shoulder strap or mount just the puck on your Deus stem and shaft. You can even plug a Bluetooth APTX-LL transmitter into your puck adapter and use your Legend wireless phones. Although the collective audio lag may not be ideal.
You can also get full size third party headphones with a puck mount.
Or get either of two WSA II wireless phones (WSA II Puck or WSA II XL full size over the ear phones) that lack standalone control features of the WS6 Puck. Since you are not an XP backphone fan, then WSA II XLs would be preferred, except that they cost about $170 - $200US.
Here are some pics and links to alternatives to the backphones:
WSA II XL:
WSA II
Wired headphone adapter plate for WS6 or WSA II puck
Puck stem adaptor mount.
Both of the above are included in a single kit for about $19US at https://a.co/d/9xsAiiC
Puck wrist mount
Detecting Doodads puck mount over the ear phones. I like these. They are weatherproof, have mute switch, and an audio input jack so you can use them with other detectors.
https://www.detectingdoodads.com/store/p43/Over_the_ear_Treasure_Phones.html
Quest XP Deus Compatible Puck Mount Phones
Gray Ghost XP Deus Compatible Puck Mount Phones
Hope this helps give you some options to consider as alternatives to the backphones you can spend as little as $20 or as much as $200 or more to address your issues with the backphones.
- 6
- 1
-
12 minutes ago, Joe D. said:
I beg to differ, a gold coin will trump any silver you've found so far! (Jmo) And they hold up better in anyone's soil conditions! Next year, I predict you will find one!🥇😉🍀👍👍
I'm surprised he hasn't turned one up yet as he's hit just about all my other bucket listers, so yeah, maybe next year. Just glad Bob lets me bottom feed off his permissions. It's been a good Fall/Winter relic season so far for both of us. I'm doing good on total quality finds, but can't get my coil over the old coppers like Bob can. Of course I have to drive two hours to pillage Bob's front yard and other Northern Neck permissions vs. his daily access. Despite that I'm holding my own and enjoy Bob's company, coffee, and permission access generosity.
It's been a fun 2023, Bob, thanks and looking forward to a some more visits in 2024. Congrats on the Colonial Copper, Merry Christmas, and Happy New Year!
- 5
-
The Original Simplex and the Legend use different wireless headphone protocols so the Simplex wireless headphones cannot be used with the Legend.
- 1
-
2 hours ago, Digalicious said:
That's a pretty decent haul.
I love sites with little to no aluminum trash like foil and pulltabs. Although it seems one can go to sites in the middle of nowhere, and still find foil and tabs! So much so, that I've come to the profound conclusion that foil and tabs have the ability to fall from the sky 😁Kids gotta party somewhere, hunters use farm fields to access the woods, and some farmers like to partake in the field, too. So if you are in a farm field or next to any kind of well travelled road, there is going to be scattered aluminum, and aluminum especially concentrated on the edges.
- 3
-
2 hours ago, Zaj56 said:
One more quick question.....my hearing aids are BT LE and while they wont work with my Nox 900 ..I am wondering if they would work with a Legend without adding a transmitter?
They might connect, but if the headphones don’t support APTX-LL then there will be a significant delay as they will probably connect using the SBC code which is pretty laggy. Legend doesn’t support the low latency LC3 codec used by the latest Bluetooth LE wireless devices only APTX-LL for low latency wireless detector audio.
13 hours ago, Zaj56 said:Thanks....I remember you mentioned earlier in the year that another company was considering using that technology but I am guessing that fell through?
Bluetooth LE is an industry standard and the LC3 codec is the latest and greatest low latency codec utilized by BT LE. But manufacturers can choose whether or not to make their BT LE devices compatible with third parties. Minelab has intentionally chosen not have their Bluetooth LE audio devices connect with 3rd party devices, so even though 3rd party Bluetooth LE devices with the LC3 codec are starting to appear on the marketplace, none of them will be compatible with the ML detector Bluetooth LE transmitters.
-
12 minutes ago, Lodge Scent said:
The tone bin of 73 to 88 also had a volume of zero.
Thanks for the additional information, Lodge. FWIW - That bin at zero would knock out a lot of the flat and two-piece buttons we recover at our Colonial sites that fall in the 73 - 78 range. A lot of aluminum there too, though. No easy day.
- 1
-
5 hours ago, Zaj56 said:
Is there any earbuds ,neckband , or bone conduction audio devices on the market that are compatible with the Nox and Manticore BT LE or is this a pipe dream?
To more directly answer your question, Minelab has locked down the BT LE on Xterra Pro, Nox 700/900, and Manticore BT LE such that you can only use the ML branded headphones that are specifically designated as accessories compatible with these detectors. ML appears to be coming out with a compatible wireless receiver called a WM-09 into which you can plug any wired phones or earbuds but it is not released yet nor do we know the cost. Otherwise, your only option is using a BT APTX-LL transmitter plugged into the Xterra/Nox/Manticore headphone jack as Mark pointed out above and compatible BT APTX-LL receiving devices/phones/earbuds.
- 1
-
41 minutes ago, BigSkyGuy said:
Yes. It says "shipped", supposed to be delivered 12-27. Thet must of sold out quickly.
Yep. I noticed that the banner changed from "add to cart" to "pre order" so it must have been a short window of opportunity before they sold out. Congrats on snagging them.
-
5 hours ago, phrunt said:
They've caught it up a little bit with the recent update, however it's still a long way behind current gold prospecting machines and that HF elliptical is the missing piece of the puzzle.
It would be great if @Jeff McClendon would weigh in on this one. I think his last head to head amongst VLF detectors including the Legend and Deus 2 with the latest update indicated relatively small gap remaining in micro gold sensitivity vs. Legend. At the end of the day, I think Jeff has embraced the Axiom as his new gold machine over and above any of the VLF machines mentioned above, but noted significant improvement in the D2, such that "long way behind" the current crop of multipurpose SMF machines is no longer a fair characterization (unless you were actually referring to dedicated prospecting machines), though I do not recall any D2 v2 testing head-to-head with the Nox 800 or Manticore. I understand, Simon, that at least half of your detecting involves gold and also that you have relatively mild ground and not a whole lot of iron trash to deal with, so I get that the D2 may not bring anything game changing to the table for you. No detector does it all, as we know. Therefore, I am trying to determine whether the Manticore brings anything to the table for me to compliment the Deus 2 as far as relic detecting is concerned. I don't think that will know until I can get my hands on an M8 coil - which is getting rave reviews from fellow hot dirt/high iron relic detectorists who do have an M8 for their Manticore and who also have the Deus 2. All that being said, no argument from me that a small elliptical coil would definitely help matters wrt to small gold performance (and Jeff states this as well in the test post linked below) and of course in tight terrrain. I also link a field test outing where Jeff put the D2 head to head with the Legend (9" coil on D2 vs. the Legend's 10x5). Just trying to provide perspective on the D2's gold performance with facts vs. adjectives that may lack context.
One additional point, I think earlier in the thread people were also mentioning that the D1 HF elliptical coil also operated at much higher frequencies. While true, I think that SMF detectors such as the Nox, Manticore, and Legend, as well as the Deus 2, have conclusively demonstrated that SMF gold modes, ostensibly operating at 40 to 45 khz top end frequencies are getting the job done on small gold, such that I think that if XP simply provides a D2 compatible small elliptical running at the same frequency FMF (XP's term for simultaneous multifrequency as implemented on the D2) range as the other three D2 normal search coils, would be sufficient.
- 2
-
11 minutes ago, BigSkyGuy said:
For those in the US, both the M8 and M15 are in stock at Seriousdetecting.com. I just ordered both.
It says "Pre Order Now" and Delivery between 1/1 through 1/9 if you order today. That doesn't sound like they are actually in stock. Did you get a delivery estimate when you ordered?
-
1 hour ago, HardPack said:
Perhaps there is Deus II sales volume break point before XP invests in new coils.
They were probably focused solely on releasing the Xtreme Hunter two-box coil so they could recoup their R&D investment after announcing it 6 years ago. Maybe now that is behind them, they can focus on a fifth coil.
- 1
-
Welcome to the forum!
A Look Back At 2023
in Metal Detecting For Coins & Relics
Posted
Ha ha. Not yet. May do some beach detecting if we get major erosion from a winter Nor'easter. We have one coming this weekend. Otherwise, that will have to wait until April/May. It's all ready to go!