Dean Stone

Dose anyone that has tested the Legend know if the viberiton works on small targets. I have very bad hearing and have aids in broth ears, and have trouble hearing low hits on reg. detectors. I have the XP Deus 1, and afriend has one he always ask if i can hear targets he gets and i can't hear them. I was thinking about the Legend and that might help if it will viberate on deep targets. I think i am asking this right, thanks for any help. Dean

I liked the Whites TRX, but lost mine,that is another story, It pointed deep and on the point, not 360% . I have hit small targets and dig hole to deep, the propointer will keep going off make you think the target is in the bottom of hole. I hate that. Need just the tip to point, is there any pointers that just point on the tip? Thankd Dean

I have been here awhile but don,t post much. I think i learn more by just keeping quit than talking much. I really like this forum, alot of good info. Sorry i posted in wrong place. Will keep reading, Thanks Dean

HAS ANYONE BEEN KEEPING UP WITH THE N/M Legend ? I think it is being held up trying to up date to the Deus 11. I am waiting to see how it will compare to the Deus 11 When it comes out. If it is as good at half the price, it will take over. I have very bad hearing and the vibrating part looks good to me. I had the Deus 1 or first, what ever you want to call it. I could not hear signals my friend would get on his. I hope the vibrating part works on deep targets. What dose everyone think of the Legend? thanks Dean

I have aids in my ear, all the time when i was 17 teen, i tryed to get in the army and was told i was 80% to 90% deaf, I always knew i was not very smart, but didn't know that it was because i couldn't hear in school. I am almost 69 years old now and it don't matter that i can't here. No one can use my headphones for they are to loud. I have trouble with ground balance, i can't here the tones. I still do ok, i have alot of rings. Good Luck Dean

Thanks Sven1,

Thanks all, These are the Marlex floats , not the black rubber ones. I just didn't know if they were to have air or not. They float ok, just thinking, that sometimes get me in trouble. Thanks Dean

They are the hard floats, they have air values on the small ends. with values covers like on a car tire.

Hi all, hope everyone is ready for dredging . I have a 2" Keene dredge, with the hard floats. Dose anyone how much air to put in the floats? Don't want to blow them up, but need them to float good. Any help would be good, I tried to look on line but could not find how much pressure to put in them. Thanks Dean

Thanks guys, I will call Whites and see if I can get one shipped to me.

Dose anyone where I can get a coil end that's goes on the black control box. I have a 9.5" coil that someone changed the end for another detector. I can't find where to order on Whites forum. Thanks Dean

I found one like that, though it was a pic. frame.

They will be kind of big hanging on your head. You could put them in a back pack. ha ha

As for as a pinpointer, I have a TRX and it will pick up a #4 shot, That is a lot smaller than that nug. I didn't mean that you didn't do a good job. A pinpointer will speed up your dig time and give you more time to hunt. I do some beach hunting and my pointer will pick up ear ring backs when in my hand.

Man you need a pinPointer, You can dig much more with less time trying to find it.

I sure would like any of these treasures, Thanks flintstone

Still today in SouthWest Kentucky where Fort Knox is you can't go in without singing a paper that you can't hold the USA for anything that happens to you. They still have drills for Army. I have deer hunted there and there is some trees that look like they have been hit by a boom that makes tooth picks out of them. There is still live amo in the mud that can kill you.

Some of the best info on F75 I have read any where. I have not used mine much so I need to know the defferance in the detectors. Realy grate to read about difference in detectors.

Only way to know for sure, is to cut a small piece off and send to a place that can tell for sure. Good luck, you might have a good one.

I have used the swivel nozzle on my 2" Keens, but took it off after the swivel keep getting fine sand in it and would not trun. Sometimes it was even upside down and need a big long handle of something to work it loose. They are good when they work, but if locked up then a pain. Hope yours work better if you get one.

Thanks All, Don't want to get into a big fuss over this. This is just something I have been working on over the cold weather here. I test my tailing and lose very little with the 2" Keens, but run slow so not to blow any out. I was thinking that use the same motor as the 2" and run faster would let me move more dirt. The 3" has a 5 horse motor, and that is load by itself. I think I will try the 3" sluice on the 2" frame and that motor, and run faster. I do get good gold from where I go, there was a mine back in the 1800's on top of the hill where I go. Every spring there is more gold in the same spots I did the year before. Biggest piece is about a 10th of a gram. I sometimes go and just pan when it is to cold to get in the water and get 6 or 7 pieces in a pan. Going to try and make it out more this year. With a broken back and a plate in my neck, some days when it is cold I just can't make it. If anyone has more info, put it to me. I am 67 years old and try to do what I can till my time comes. Thanks for all the help. Dean

Hi Swamp, do you think the 2" floats will float the 3" sluice and use the 3" hose? I have boath set ups, It is just the 3" hose and high banker is just so much heavier than the 2". I prospect in OHIO, and the gold is very small, I got to go about 6 times last year and ended with 1.10 OZ. of gold. Going to try and do better this year. thanks Dean

Hi All, I have a 2" Keene dredge and a 3" Keene HighBaker, I use the 2" 90% of the time cause the 3" high banker about to much for me to get to the small creek I go to. I get very small gold at this creek but a lot of it. Do you think if I fit the 3" sluice box on my 2" floats I can get better gold recovery? I never run my Honda full blast anyway. I was just thinking the bigger sluice will keep more small gold. What do you all think? Thanks Dean

Hi tboykin, The Grout/mud mixer, will work. I frond gold with clay and put a half of a 5gal. bucket with water and mix the heck out of it. Take a lid and put a hole in middle so the water and mud don't fly out. I frond most of the gold was just on top of the clay, not much in it. Hope this helps some, Dean