ed 1

Hi, thanks all for the inputs, will post on any success, cheers ed

Hi Phrunt, thanks for your input, will do. Not sure if I trust the depth meter or the pinpoint come to that matter. Think you are spot on about covering the ground and will probably start early next week weather permitting, cheers Ed

Hi, a good friend of mine lost his father about 5 years previously and has worn his fathers ring ever since. Four months ago my friend broke a bone in his hand and changed the ring to a finger on the other hand. The ring dropped off his finger as he was cutting the grass, unfortunately the mower was a ride on type and could have dropped off in any one of three small fields. Would I be better off switching to gold mode or leaving the equinox in field 2. In gold mode will it ignore all other metals(would save me a lot of time if it did ). Any ideas to my best approach? Regards Ed

Hi, looks good! Ed

Hi, thanks for the replies/advice. Brought an evolution today and just had to go out and try it ! Very wet ground here in Suffolk but couldn,t wait. Less than 20 mins got a strange signal, tried it from several directions and still not what I was expecting(using my nox 800). Dug a small sod and retrieved a 20p coin.Replaced plug and swept detector back over and got another strange signal. Re dug and got a corroded button. Replaced plug, re swept the nox and this time got a very strong, clear signal. Re dug(smiling by now) and retrieved a nice hammered silver. Just goes to show, always re swing over previously dug holes. Regards Ed PS you cannot beat a large bar of Cadbury,s.

Hi, I'm baffled by choice. There are so many digging trowels on the market that I cannot choose what the best is. I have cut the options down to a handful. My choices are Garrat, Whites digmaster and the evolution extreme blade(with serrated edges). I intend using it to cut neater holes if possible on some of my pasture permissions where a larger dig may be frowned upon. Regards Ed

Jeff/Chase, thanks for both replies. Excellent advice which I will obviously take. Regards Ed

Hi , as your advise have performed factory reset and can now pick up £1,£2, hammered silver and gold signet ring using field 2, happy days. As Jeff stated the reset does still have the new F2 in iron bias_ my question is that the factory reset has both Fe and F2 set at 6 leading me to believe that the detector will now operate with both running.If not how do I delete/disengage one of them. Has anyone tested to ascertain optimum settings? Regards Ed

Hi, have completed factory reset and customised Field 2 and can now pick up £1,£2, gold ring and hammered silver so thanks for the advise. One last question- iron bias now has both FE and F2 options. Do I use both of these or should I only be using 1? If I should only be using 1 how do I get rid of the other? Regards Ed

thanks Jeff.

Thanks Jeff, will take your advise, regards Ed

Hi, when testing was in the back garden, have checked in several different locations and still field2 will not pick up as my previous mail and signal as field 1 ,park1 and 2 and beach 1 and 2. Steve, if I factory preset will I have to re download the latest updates? Regards Ed

Hi, thanks for taking time to reply. I didn't ground balance but was set at 0. Recovery was at 3 and iron bias was FE3. Will try factory reset, just waiting in case its a common problem. Had not recently tested my nox and wish I had, the problem may already have been there but I didn't notice. It is obviously a fairly recent problem as a couple of the hammered silver coins that didn't register were only found a couple of months ago so they obviously registered then. Regards Ed

hi, have just updated my equinox 800 with the latest software. On checking my favourite profile (field2) found that it doesn't pick up gold signet ring, some hammered silvers, pound and 2 pound coins. Field 1 does pick all of these targets up. Anyone got any ideas as to why this should happen? Good job that I checked or would have wasted a lot of time and effort. Regards Ed

thanks for feedback, have ordered a garret, ed

Thanks, I did switch of when not in normal profile so will have to reset.

hi, thanks for the advice, have ordered a carrot and cannot wait to use it, ED

Hi, am looking to purchase a good pinpointer to use with my Equinox 800. Talked to the sales guy at the shop where I purchased the detector and enquired about getting either a Garrett pro or the latest Nokta. The sales guy would only recommend that I get a Minelab pro find 35 as the others would interfere with the detector meaning that I would have to switch it off if I wanted to use the pointer. Has anyone had these sort of problems or was it just a creative salesman ?, any thoughts would be helpful, thanks

Have seen several reviews of the Jeemak pointer but am not sure about authenticity of the reviewers. Normally if something is this cheap it rings alarm bells. Has anyone got one, are they any good? Would be interested to see if anyone has any experience of them, thanks in advance.

Hi, know that this is not Minbelab specific but what is the most informative/interesting magazine for me to order

Thanks,for the reply.

Hi, Is it only possible to save one user profile? Or is it possible to save two, for example a park and a beach profile both saved. Thanks

thanks, tried as you suggested and it works

Thanks guys, really helpful ! Appreciate the replies.