Nokta Detectors

Do you have the latest instructions included in the package? 2.4 GHz Wireless Headphones Pairing Instructions 1. Insert the dongle in the socket located on the left side of the system box and turn the detector on. 2. Switch the on-off button located on the right side of the headphones to ''on'' position. 3. The blue LED on the left side will start blinking fast. 4. For channel selection, push and hold the trigger switch forward and press the down button simultaneously. Each time you press the down button, channels will change between 00-05. 5. When the pairing is successful, the audio will be heard through the headphones and the blue LED will start blinking slowly. 6. If no pairing occurs, press on the button marked with a white dot on the headphones with your finger to switch to the channels at the alternative frequency. Then repeat the pairing process at number 4. Each time the white button is pressed on, 1 or 2 beeps will be heard from the headphones. Each beep indicates switching between channels at alternative frequencies. 7. Once the pairing is complete, the headphones and the device will connect automatically at the next start-up. 8. If the paring is not successful after you remove the dongle and insert it again, repeat the above processes. 6. To adjust the volume, use the on-off/volume knob on the device. NOTE! 1. If the connection is lost during pairing, turn off and restart the device and the headphones and repeat the process. 2. If the disconnection continues, turn off the device and the headphones and remove the dongle. 3. Insert the dongle again in its socket and repeat the above process. Charging 1. Insert the supplied charging cable into a USB socket (PC, adaptor etc.) 2. Insert the other end into the charging jack on the headphones. 3. During charging, the LED next to the charging jack will light up red. 4. Charging will last approximately 4 hours. 5. Upon completion, the red light will go off. Technical Specifications Frequency: 2.4 GHz Audio Output: Mono Battery: Li-Po Battery Life: 14-20 hours Charging Time: Approximately 4 hours Transmission Range: 10 meters (33ft.)

Hello! This is Dilek. We have not received any email regarding an overloading GR small coil. Which address did you send it to? I personally check each email (just like I try to read the forums on a regular basis) and I make sure that each email is answered by somebody in my team if not by myself. If the issue continues, please contact me directly at dilek@noktadetectors.com and I will take care of it directly. Thank you!

Hello all. Just to give you guys an update - we have made a change in Makro brand distribution. We will distribute the Makro brand to multiple dealers in the USA moving forward meaning we will not have an exclusive distributor.There is no change in the Nokta brand distribution. It is still distributed thru Kellyco to other dealers. For Makro, we are evaluating dealership applications and will assign a few more new dealerships based on certain criteria with location being the most important one. Any dealer interested in selling Nokta products, should still contact Kellyco directly. Should you have any questions, please do not hesitate to contact us at dilek@noktadetectors.com Thank you!

Hello all.Please note that we sent the wireless headphone samples to a few testers in the USA, Europe and Australia.We got no negative feedback on the volume from any of the testers so we released them as they are. We believe it is more of a subjective point rather than an issue.However, we are tweaking the volume now since some customers are concerned.Since we did not ship any units to USA yet, no concern for the customers who have pre-ordered them as they will be getting the revised version.For any customers who already bought them thru Europe or Australia and who think the volume is high, we can replace the headphones with a new one.

Dear Valued Customers: First of all, we thank you all for the increasing sales of our Racer series detectors. As you all know, Racer 2 is an addition to our current Makro product line up and we have no intentions of discontinuing the original red Racer. As a matter of fact, for those customers who do not need the extra features of the Racer 2, the original Racer still stands as a very good performing hi-end detector. Many of our dealers and customers have been asking Nokta& Makro for a device that would retail around the $500 price range.. Therefore, as of June 1, 2016 we changed the price of the Racer as below to meet this request. We believe that the new price change makes Racer absolutely the most competitive and attractive product in that price range! RACER STANDARD PACK SUGGESTED RETAIL $499 RACER PRO PACK SUGGESTED RETAIL $699 Thank you!

That I cannot answer yet. I have a shipment going out to USA this week... may or may not make it on this shipment. But definitely the next one. Will keep you updated.

Dear Valued Customers:Please note that we are adding a new, optional elliptical coil to the Gold Racer based on customer demand.This smaller coil is excellent on exposed bedrock or hunting around rocky areas or tight spaces. GR19 Waterproof DD Search Coil19cm x10cm (7.5''x4'')MSRP: $119

This device is not waterproof but hopefully our future models will be. The frequencies are PLANNED to be - 4 - 14- 21. Thank you.

Please note that it is all how you look at the stages of a product development. Yes, the product is in testing BUT testing can last for months sometimes as a small change may lead to many other changes in the device. We will definitely release this machine this year but giving a launch date at this stage would be misleading customers. And even we could not launch this detector in April : -)

Hello... currently, we do not have those products in our product roadmap but we could if there was enough demand. We would like to make all customers happy but we do not want to overdo it and confuse people either. Nokta Impact is still in development. We will definitely release it this year. And yes, we are working on a PI machine but will not be launched anytime soon. Thank you!

We are not discontinuing any of the models. All Fors series will stay in production.

Mind? Aboslutely not... we appreciate feedbacks and comments especially the constructive ones such as this one. Thank you!

First time hearing this feedback...thank you!!!

By no means are we on this forum to make claims or to sell or to get into debates regarding competition. As a matter of fact, we refrain from getting involved in such discussions as a manufacturer and we leave all that to the users of the products. Anybody who has been following my posts on this forum or others can vouch for that. We are just trying to verify some results to avoid any misinformation as well as support you in case there is a reason why you are experiencing different results than what we are seeing.

For a more objective test: Please conduct the test outdoors as these 2 devices have different operating frequencies and may get affected differently from EMI. We are very familiar with the model in comparison as we also do many benchmark tests in our development stages. Use the Gold Racer at factory defaults and set the model in comparison as you feel more comfortable with. You can compare All Metal to All Metal and our Discrimination 2 to the other model's iron off setting. Test materials- as gold nuggets will vary in size and shape the best would be to test a US Quarter and a nickel. No audio boost is necessary. After you finish testing and recording the results, turn up the sensitivity on the Gold Racer to the maximum level that the environmental conditions allow (you can leave all other settings at the factory defaults) and record your results again. Thank you! PS - Coils - Try to compare similar size coils. In case you really have an issue with the 10x5.5'' coil, you can compare the small coils.

We cannot post a bench mark test video as a manufacturer as it would not be ethical. However, below is the link to our air test video for the Gold Racer conducted with gold dust, different size nuggets as well as a men's wedding band. You can tell us what you are doing the air tests with and we can take a video with the same material here.

We need to determine whether there is something wrong with your device or not. At the factory defaults, can you please tell us the air test results for a US quarter and a nickel both in All Metal and Discrimination 2 modes for the Gold Racer as well as the model in comparison above? I really don't know why you did not hear from the team as we are pretty quick in responding under normal conditions but I can guarantee that I will personally take care of it if there is any issue.

Hello. Just wanted to chime in here as your post got our attention. There is really no way that the Gold Racer results will be 3 inches less than the GB2 in an air test unless there is something wrong with your coil and/or your detector. I will be PM'ing you with some questions if you do not mind. Thank you!

THANK YOU ALL on behalf of my team. We do it all as a team here and I was part of that team. We always try to think '' How could we make metal detecting easier for our customers?'' and I guess we did it right based on your positive comments - The source of our motivation. Thank you again.

Dear Valued Members, As a relatively younger company, we would like to offer a full product portfolio for our valued customers. Most of the time, the new products evolve as a result of customer demands & requests and to meet the different needs of customers around the world. Each device has its own specific use, features or performance to it. With that said, here is the new addition to our product line-up - The FORS Relic: Built on the famous FORS platform, the FORS Relic offers new features and unbelievable unmasking capabilities for relic as well as coin hunting. Operating at 19 kHz frequency, the FORS Relic features 6 search modes, iMASK (Intelligent Masking), Tone Break and Iron Volume. MSRP - $799 • 6 Search Modes (All Metal / 2-Tone Disc / 3-Tone Disc. / Conductive Ground / Boost / Swift) • Adjustable Tone Break • Adjustable Iron Volume • Ground Tracking • Auto & Manual Ground Balance • Pinpoint & Depth Indicator (cm/inch) • All Terrain • Dual LCD Display • Digital Target ID & ID Masking • Frequency Shift • Built-in LED Flashlight • Waterproof Search Coils • Easy Use • Ergonomic Design • Long Battery Life • 10 Languages Thank you all!

Hello all. Just wanted to chime in here. This is in fact a Kellyco exclusive product in terms of distribution. Nokta will not ship this unit to resellers or end-users. Kellyco will ship the product globally and may sell to resellers who are interested. The detector has been tested in the USA, Africa and Australia. Steve Herschbach also tested the product and he can feel free to comment on it. The pre-production unit Steve tested did not have the long coil cable or the hipmounting belt . The only change we made on the production units were the LEDs based on Steve's and another tester's feedback. They were not visible enough under bright sunlight so the update was made before we went into production. Nokta did make the first shipment to USA and Kellyco should have the product in stock in a few days. We can answer all questions regarding the specs or the features of the product. Any questions regarding pricing or shipment dates though should be directed to Kellyco. Hope this info helps those who are interested. Thank you all!

Thank you! Racer 2 ID range has been re-arranged and optimized for non-ferrous targets so yes that has been addressed as it was requested by many users.

We are proud to announce the new Makro Racer 2 - a device that customers asked for and we designed! The Makro Racer 2 is boosted with features to find more treasures and less trash! To view the full features, specs and pricing please visit: https://www.detectorprospector.com/metal-detector-database/noktamakro-racer-2-r85/ Makro Racer 2 metal detector

Thank you Steve for the comments. Yes, you did float the idea of the LEDs and you know we do listen to all our testers and customers and try our best to offer them what they need to the extent we can.

And the answer is, it is legit. The unit is going to be hip mountable and the cable will be longer.