Nokta Detectors

Hello Chuck. First of all, we are really sorry that you had a bad experience with our product. Normally, we refer our customers to Kellyco who is currently our repair center in the USA. And for all parts we replace directly, we almost never ask for the defective part back. The reason we replaced your part directly and we had to ask for the defective part back is that we had some failures with the small LCDs on the handle in the past but those were complete failures where the LCD did not work at all and we could find the cause. In your case though, you stated that the light comes on the LCD but no numbers. We must find the root cause of the problem. We really do not want to cause any inconvenience and our goal is to avoid future issues and offer better products for our valued customers. The address is: Nokta Muhendislik Emek Mah. Sıvatyolu Cad. Sakız Sok No 4 Sancaktepe ISTANBUL Turkey Tel: +90 216 415 5686 Just call DHL for a pick-up and use the DHL number we gave you when sending the part back. Thank you!

Hello. My team wants to investigate on this further so please email dilek@noktadetectors.com. Thank you.

Hello all. A little bit more patience. The availability date and price will be announced the week of December 7th. Thank you!

Steve, a thank you will just not be sufficient for all this hard work but I will say it anyway - A huge thank you on behalf of my team for all you have done. I sincerely hope that you find a lot of gold with our device so that it at least pays off for this hard work although your feedbacks and your review are worth a lot more than that for us! Once again, this is very appreciated and I cannot wait to get the final unit in your hands.

Thank you Ray! My comments to Steve's post applies here as well. You may post your test results keeping in mind that the device you have on hand does not have the final menu setup. It is also missing the Audio Boost function and the revised iSAT resolution which were added to the device after its test results in Australia. Other than that, the performance is the same. Thank you very much for taking the time to test this device and provide us with your very valuable feedbacks.

Thank you Steve - you may post your test results. The only thing is, I want members to be clear that the device you have on hand does not have the final menu setup. It is also missing the Audio Boost function and the revised iSAT resolution which were added to the device after its test results in Australia. Other than that, the performance is the same and I leave that up to you to comment on. I also want to thank you once again for taking the time to test this device and provide us with your very valuable feedbacks.

Thank you Chuck for your nice comments and for purchasing our product! The Fors Gold+ shipment has arrived in the USA and I am sure they will distribute it soon to dealers.

Find the tiniest nuggets, micro jewelry and even coins with the most sensitive and versatile gold detector ever made! Specifications and Details on the Makro Gold Racer

Hello there! As a matter of fact, many customers were requesting a left-handed version of the device so we made an announcement months ago that customers can place a special order for the left-handed version. You may have missed that announcement.

Gold Racer is next in the pipeline. The Gold Racer is a high-frequency gold detector designed to detect the smallest nuggets and has necessary adjustments to deal with high-mineralization.

Hello all! This is to inform you that we started shipping the Fors Gold+ to dealers. Please check with your dealer on the availability date. Thank you!

Hello all.... I guess I need to step in here : -) The device is ''planned'' to be launched as a multi-frequency device. As the product is still in development, it would be misleading to make definite remarks. Thank you all...

FYI - we are planning to start shipments to dealers in 2 weeks. Please check with your dealer in terms of availability date.

Hello there! The extra lower shaft and the 5'' coils were included based on customer feedbacks. We could have included the case and the covers, too but to be honest with you we did not want to increase the price more as for people who own a FORS Gold already and who want to upgrade to the Fors Gold +, it would be a waste of money. Environmental covers can be thrown in the package at the time of order, not a real big issue.

Yes, that is the next one in line. Although the launch date is not set, I can say it is not too far out at this point.

Dear Valued Members: We are proud to announce that the new FORS GOLD + is available for pre-order now including a FREE 5'' DD coil. Built on the famous FORS platform, the FORS Gold+ offers advanced gold prospecting capabilities. Operating at 19kHz frequency, the FORS Gold+ features a new advanced All Metal Mode with iSAT (Intelligent Self-Adjusting Threshold) and 2 discrimination modes (Fast & Boost) all designed for harsh ground conditions. The two included waterproof Double-D search coils make the FORS Gold+ the best choice for prospecting in rivers and streams as well. MSRP: $799 PACKAGE CONTENTS FGP26 Waterproof Search Coil (26 cm x 14 cm (10’’x 5.5’’) DD Also includes a FREE FGP13 Waterproof Search Coil 13 cm (5’’) DD Extra Lower Shaft Headphones 4 AA Alkaline Batteries OPTIONAL SEARCH COILS AND ACCESSORIES FGP26C Waterproof Search Coil (26 cm x 14 cm (10’’x 5.5’’) Concentric FGP40 Waterproof Search Coil (39.5 cm x 33.7 cm (15.5’’x 13.3’’) DD Carrying Bag Weather -Resistant Cover AC/Car Charger & 4 AA Rechargeable Batteries Please also find attached the product brochure. Should you have any questions, please feel free to ask or contact me at dilek@noktadetectors.com

Hello..this Dilek from Nokta. There may be a disconnection or a short with one of the cables in the system box. If there is a disconnection, it will be easily resolved. If there is a short, this may have been caused by the rain if it went inside the system box. Please send me your email address at dilek@noktadetectors.com and I will further assist you with instructions. Should you need any repair work, Kellyco is currently our repair center in the USA.

Steve, thank you so much for your nice compliments! Your support and your objective feedbacks certainly mean a lot and lead us in the right direction in terms of providing the best products we can for our customers!

You are very welcome. It is our job. Your satisfaction is the biggest motivation for our company. Although we are physically thousands of miles away from our customers, we always stand by them in terms of service.

Hello! Just sent you a PM regarding the issue. It will definitely be taken care of, no worries. We do not need frustrated customers, just happy ones : - )

Enjoy!

Hello all... many of you have been asking for more reseller options. With the efforts of our distributor Kellyco, here is our first additional reseller in the USA: http://www.arizonaoutback.com/azoroot/shop/category.aspx/nokta-metal-detectors/1039/ Thank you!

Dear Valued Members: We are proud to announce the new waterproof Nokta Pointer: http://noktadetectors.com/nokta-pointer.asp

No need to say sorry Steve. I thank you! You always have been a great help with your sincere and objective feedbacks. I also know you are more interested in the Gold Racer than the current one. When the gold version is close to finalization, I will definitely share more info.

Hello all..as I see many posts and comments on our shipping date, I wanted to clarify a few things: I saw a comment: ''makro is up to its arm pits with trying to trying to straighten out the mess they have with the Racer release.'' on another forum. I guess this is the price we have to pay for being so open and let all speak their free opinions about our products and also not denying any fault if there is any but rather keep everybody updated with the changes we are making on public forums. We understand that no matter what we do, we cannot make every single person happy or appreciate what we are trying to accomplish but it is OK. We will continue to do what we are doing for all those who are appreciate it and see the value behind it. There are NO delays due to any changes we made based on customer feedbacks as they are all taken care of already such as coil covers, tone sequence, 3-tone depth increase etc. And these were NOT any faults in the machine but rather changes we made based on testers' and customers feedbacks. The only fault we came across so far is the issue with the bolt which is being addressed. In my earlier post, I stated that we were planning to start shipping product the week of the 23rd. The date we start the shipments has not changed but: Our shipments are scheduled and planned according to the dates we receive the official purchase orders from our distributors around the world. We send products in order to be fair to all resellers so whoever places the official order first, gets the first shipment. And the first few shipments will go to Europe. Therefore, US shipment may be delayed 1-2 weeks. If all goes well, we are planning to make the shipment the week of March 2. Thank you all!