Jump to content

Denny

Full Member
  • Posts

    155
  • Joined

  • Last visited

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Posts posted by Denny

  1. Tarsacci has the worst audio! 
    My tarsacci still resets itself when I’m hunting after sending it to Dimitar for a check up. 
    Dimitar needs to make some changes with more testing. 
    Not worth the $1500 I paid.   
     
    I heard Dimitar tried to pitch the tarsacci to first texas detectors but was shot down that’s when he decided to out on his own. 
    He knows nothing about marketing.


     

     

  2. Hunted an old patch of grass in Fresno california where I dug up many barbers, mercs, a few seated and a 5 gram gold nugget. Funny thing is I only dug up 2 rosies and a silver Washington quarter over the years from this area.

    Yesterday on Christmas Day I finally squeezed some time to hunt this old patch of grass.  First 4 holes were aluminum targets then I moved over to where I had dug up a half dime 10 years ago.  First target I get a 88-87 at 6-7 inches on the D2.  In the plug I had a hard time finding the target. As I knocked more and more dirt off the bottom of the plug I finally heard the target it was near the surface of the plug. Moved a little dirt and I saw a round silver looking thing. 
    Pulling it out I noticed it was definitely a silver coin. Hoping it was not a pesky rosie I brushed off some dirt and the reverse looked different from a barber flipped it over and brushed some dirt off and saw the bottom half of the obverse. It was a 1858 seated Dime in almost good condition.  My 6th seated from this area 2 were half dimes.  My next target I thought might be a silver turned out to be a modern gaming token.  I was satisfied with the seated so I called it quits in about an hour. 
    Hope everyone had a good Christmas Day. 
     

    Denny


     

    IMG_0927.jpeg

    IMG_0926.jpeg

    IMG_0925.jpeg

  3. 52 minutes ago, JCR said:

    The Tarsacci should be able to do better but I am at a loss to make any suggestions other than lower Sensitivity to 2,3 or 4 max and give Dimitar a phone call.

    Tried that didn’t work.  
    I’m sure dimitar knows about these kind of tests, if there was a way to see past the heavy thick blacksand he would have said something.  Dimitar made a coil specifically for blacksand it’s supposed to be better than stock coil but I don’t think it will pass the heavy thick blacksand.

  4. On 3/6/2023 at 5:15 PM, BigSkyGuy said:

    I have had success using All Metal, Ground Balance = 900 (auto GB is around 550, so a very positive GB), Black Sand = On, and 6.4 kHz. These settings are very quiet in black sand.

    Tried that.  Didn’t work in the test with 1 inch concentrated blacksand.   Tarsacci Couldn’t see nickel on top of below blacksand.    D2 will hit on the nickel with ID.   Even with blacksand accepted on the D2 it will still hit on the nickel with ID. 

  5. 7 hours ago, midalake said:

    Well the two machines are totally different. The Tarsacci is single frequency and the D2 multi.
    When I ran the Tarsacci here in moderate Black Sand I could not get past 9khz without having issues. However, I could run at just about max sensitivity even in the water.
    It might be possible to see different results running in 9khz? 

     

    The tarsacci failed to pickup the nickel under the blacksand. I’ve tried everything on the tarsacci to get it to work.   

     

  6. On 2/5/2022 at 12:57 PM, Kaolin washer said:

    Now I am not starting a fight hear  but I own a Tarsacci, and was wondering has anyone compared the two detectors, i would like to know

    I did a blacksand test like the guy on YouTube with a   Ziplock bag  of blacksand 1 inch thick from the gold mines in Northern California.   Deus2 was able to see the nickel below loud and clear in stock beach P program.   The Tarsacci with blacksand mode on, 18khz, ground balanced, mixed mode. Tarsacci could not see the nickel.

    This isn’t a real world test but shows the capability of the Deus2

  7. On 1/12/2023 at 2:27 PM, HardPack said:

    The Garrett ATX price point keeps bringing me back for another look as opposed to the Minelab SDC and the Axiom. I have been looking at the 11x13 closed mono coil for the edge sensitivity in addition to ground coverage. If I can avoid it, I don’t want to purchased a DD coil plus the 8” mono coil. However, it is not a given that the coil will not be submersed under water. I realize the 10x12 has a center sweet spot that does not fit into tight areas. Has anyone used the Garrett ATX with the 11x13 closed mono coil? How does the 11x13 closed mono compared to the 10x12 opened DD with a full scuff cover plate?

    Save up and buy the axiom.   ATX is too heavy for all day hunting.  

  8. Does anyone insure their gold when sending to a refinery?

     I read in the fine print that USPS will ask for a reciept for items that are lost.  I don’t have a receipt for gold I find.   So I just mail smaller amounts so I don’t loose it all.      I use ARA in Texas faster turn around than Midwest for me.

     

  9. The tarsacci was a good machine when I first got it hunting the sandy river but not as good at parks.  For the next 2 years I didn’t do well with it.  I picked up the D2 in March 2022 and the tarsacci found its way to the closet. 
    One thing that left a sour taste in my mouth was I originally bought the tarsacci from Tom Dankowski in Florida to save on taxes here in California  that upsetted  Dimitar because I didn’t buy from a trans-bay detectors in California. When I received my credit card statement it said Trans-bay detectors. I DIDN’T give authorization to do so. I would never buy from Dimitar again.

    When Dimitar releases his next detector I hope he does more testing before he releases it.   
    He also needs to chime in when there is a question. Don’t expect others to answer for you.

     

     

     

     

  10. 45 minutes ago, bklein said:

    There are a couple things to try to eliminate the music depending upon access to the insides. Can it be opened or is it sealed?  You can get things called ferrite beads and slip them over wires leading to the wipers of audio-related controls. Unsolder the wire, slip over the wire, and solder it back. The  RF energy is being rectified and then amplified so you hear it. Some op amps  do this as well but I imagine swapping parts is frowned upon.

    Thanks for the tip but I think I will leave it as is. 
    I may put the tarsacci up for sale as I have not been using it ever since I bought the D2.

  11. On 12/4/2022 at 9:34 AM, dewcon4414 said:

    Sooooo how’s the hunting going?   Not been out much but the red tide was out a bit.  I heard someone had a heart attack on one beach because of it.  Tomorrow maybe a beach day to see if it’s moved …. Heard it was all the way up to Holmes beach.  As far as the ring it was a giveback with no reward ugh.  Personally that diamond had to be awfully awfully good because the ring was very simple

    No reward! 
    I would have tossed it back into the ocean.

     

  12. On 9/25/2022 at 8:15 AM, Zord said:

    I hope Xp fixes the awful audio: fulltones and pitch.

    Is it really hard to transplant original 100% D1 audio into D2?

     

    Pitch is great in square tones. Way better than in PWM. 
    I use pitch almost 100% of the time. 
    Never was comfortable using full tones.

×
×
  • Create New...