Denny

I think Greg at trans bay detectors has used the tarsacci at gold country. He may be able to help with some settings.

No I haven’t. You can ask on Tom Dankowski’s forum (Nasa-Tom) he may know.

Not sure.

It’s ok I got used to it. No I wouldn’t want to make a emi shield on a $1500 detector. I’ll just switch on blacksand. Denny

There are buildings with offices so heavy WiFi usage is an issue along with a few radio stations that broadcast from the tops of buildings. I could hear music from one of the radio stations in my headphones and it is not the headphones picking up the music it’s the MDT. I could still hunt as the music is very low. I didn’t have any issues with my CTX at this park. That machine cleaned up pretty good. Denny

Congrats on your first Barber Dime! Keep hitting those curb grass strips. denny

I tried changing frequency didn’t work. I could lower my sensitivity but that’s not what I want to do. I‘m after the deep silver. Blacksand mode is what worked to keep MDT stable. No loss in depth. Some users hunt with some erratic behavior with blacksand off. Denny

No. I use blacksand mode to cut out EMI. I could have switched blacksand mode off at the iron infested site but decided to leave it on as it wasn’t affecting my detecting.

Hunted my favorite park this afternoon for about an hour. After about 15 minutes I got a good hit swinging the MDT slower than usual. If I swing faster I don’t hear the target. Vdi was a 12-14 sometimes a 7, as I swept the coil towards the bottom of the hole swinging side to side the Vdi got higher 22-24. Down at 7 inches I pulled up a dateless buffalo nickel. That was the only coin found. Dug 11 holes, 8 were iron, 1 cut up aluninum from a can, 1 piece of aluminum from a small screw in bulb. Also dug up half of a key fob from Golden Nugget not deep and a fleur-de-lis pin it was an eyeball find from the iron infested site. Infested site ground balanced at 845 due to decayed iron in ground. park settings: sens 9, threshold-2, disc 0, blacksand ON, infested site: sens 6, threshold-2, disc 0, blacksand ON. Denny

How bout a Tarsacci MDT. Light weight and see through bad ground like you may have. With discrimination. Look into it.

Thanks, I wish I had some coins to post but they are getting harder to find.

Nice finds! I remember my first Reale dug up on the old Los Angeles/Stockton Spanish trail.

What only 1 like. Guess I won’t be posting finds like this’ll here anymore.

Nice. Looks like it has some weight to it. Congrats

I like the ATX but it’s heavy. 7lbs.

I hate those modelo foil covered bottle caps they fool me everytime.

Hunted Paul’s neck of the woods for 5 hours in search of that gold or bust coin. No luck only dug up the usual targets you find at old settlements.The last time I dug up old coins here was back in 2005 when I dug up a 1816 2 reale which is rare to find here in this part of California (Central Valley) and a 1850 French coin with the explorer Xs. Both coins now at the county museum with Paul’s finds. The ground here is fertilized dirt 700-800gb and the MDT handled it well. The iron isn’t as bad as the dry river dump site where I get overload message on the MDT over large iron. It was great to get out to do some hunting, beautiful weather and weeds were not a problem. Better luck next time. Denny

Hello Teresa Im getting music on all frequencies. I just have to deal with it. I’ve mentioned the problem to nasa-Tom but didn’t get an answer to correct the issue. Ive asked my local hunting partner Paul who also uses the MDT to go out to this city park to see if his machine does the same. Could it be I have a defective machine? I don’t know. At the dry river I haven’t tried salt mode as this is a freshwater river I will try it next time I’m there. There is lots of metal junk tossed into this river like a dumping ground over the years and the MDT handles it well. I cannot use my T2 as it just overloads in areas I hunt because of high mineralization in the ground. Pulling pulltabs and bottle caps at depths of over 10 inches so it doing its job on deep targets. (I hate those aluminum foil covered Modelo beer caps) I’ve read 2 beach hunters using the Tarsacci were comparing their machines on a saltwater beach same settings and one was able to run full sensitivity 9, threshold 0 with no issues and the other had erratic behavior had to lower sensitivity a bit. Depth was the same. Could there be a difference in how coils are made? Maybe. I think the MDT does a fantastic job in bad ground and see targets in between a few old square nails better than my T2. Denny

Hi Teresa, Do you use blacksand mode while hunting? Most users Don’t use it when hunting inland. I use it while I’m park hunting in the city with a few radio stations in the area the blacksand sand mode quiets the EMI but doesn’t quiet the music I get in my headphones. Nothing seems to get rid of the music reception I’m getting it’s not very loud I’ve never experienced anything like this with my other detectors. At the dry river when running full power I get erratic behavior but as soon as I turn on blacksand mode it goes away. I’d rather have blacksand mode on than have to lower my sensitivity/threshold. Seems like I’m the only one who always uses it. Denny

Mintmark on both halves are S.

Congrats Paul, Funny no large cents, Indian head cents or shield nickels were dug up. I’m wondering if the river crossing was a toll bridge like at Kingston.

I would like to see that also.

I would like to see a video on how well the MDT does with a coin under a few old square nails.

I too would like to hear from Ditimar. He could answer and share a lot of questions we may have. I haven’t read any postings of his on other forums either.