Mr Swing king

On 3/9/2022 at 5:45 PM, BMc said:

I've been told that you can also detect through a sheet of plywood but I haven't personally tried it. 

Shortly after I started detecting, my folks had one of their rental houses for vacant. They let me detect the property, but in the backyard they had put down paver stones over a large area to connect 2 concrete slabs.

I was swinging the simplex at the time, but detected over it any way. Found a couple quarters, a few other coins and a hot wheels car I lost as a kid. The hardest part was getting the paver stones back flush after digging underneath them.

Clive, love your books, they've helped me tremendously to learn the nox. 

I have a quick question having to do with sensitivity or volume, im not sure which.

Usually when hunting with the nox, I can hear the difference in size between coin size targets and say small chunks of Hershey's kisses wrappers.

But I've found that especially in heavier trash, the smaller size objects all sound the same size, even tiny ground falses. I've found when this is happening I can only hear  large soda can size objects as being larger.

I try to keep my sensitivity in the 18 to 20 range.  Ground balance around here is usually 0 to 13.  F2 4 to 6.   Recovery speed 4to 6

And my detector volume at 19, and the equinox headphones as loud as they go.

If im hunting less dense trash, the problem isn't as pronounced.

I personally can't believe people are giving nokta and dillek a hard time about anything. If they have any experience with any of their products, they know they are going to get a really good machine no matter when it arrives. 

The simplex far exceeded my expectations when I upgraded from a harbor freight detector. Then my finds with the simplex were more incredible than I could have ever imagined for a 200 machine. It changed my day to day life drastically. 

Even though I'm now swinging an equinox primarily, if I had to do it over again I wouldn't change a thing.

Ok, thanks guys, I'll m going to keep messing with this detuning untill I get it to work for me. Next up I need to work on the wriggle method, as I think it will help with something I think I figured out about why minelab added 4khz

Thanks for all the tips guys, been trying some of them for the last few hunts. Still having trouble on the tiny targets. Equinox will find everything great, center great in pinpoint, then can't find it with my pulsedive. 

By the way, Im still thinking some of my issue with sizing objects is a volume issue. I'm running the equinox headphones about 2 steps down from Max if quiet environment, equinox volume at 18. Everything still sounds big and loud.

How do you guys set up the volume?

Ok, so it sounds like I've been pinpointing without desensitizing, and this makes the target sound bigger. Are you guys Able to use this tracing to tell a strange shape like can slaw from say a pull tab rectangle, or a ring?

I also remember Clive mentioned the equinox has ratcheting pinpoint? Could someone demonstrate how to do that?

Hey everyone, I've been swinging the equinox since I got it in February, moved up from simplex, and been loving it since, despite a rocky start

I've found a small bit of gold, and been killing it on silver.  I bought a couple of Clive James clinick's books. Skill building, and gold jewelry hunters handbook. I found both to be helpful. 

I am running into a bit of trouble understanding target tracing/pinpointing. 

When I first get a target I can tell if it's huge by the sound, but for regular targets, in pinpoint, I'm getting better at telling the size, but still having trouble. Everything still sounds largeish. 

Clive talks about tracing the outline of a target in pinpoint to ",see the shape" but I'm stuck there. Everything is just blob shaped, with no real definition.

I've noticed on some YouTube videos when they are showing the response to a target, the sound is super quiet.

I'm wondering if I'm just running the volume too high (21 on the machine, and a couple down from Max on headphones. I'm using the equinox ones). Or too high sensitivity (average of 18 in my parks)

Could someone make a YouTube demo on target tracing?

9 hours ago, Silver Saver said:

They should name it Solstice, that would make a statement.  Sorry I had to. 😁 

 

Darn, beat me to it. But yeah, if they are gunning for minelab, might as well come out guns blazing.  That or eclipse.  What's with all the car names? Lol.  Can't wait for the nokta GTR

Yeah, in sure lots of parks in other states it's more common. Do they tan or sunbathe near trees, the tennis courts, in the center of the park?

The one time I saw it here, the lady was on the edge of a trees shadow.

I know everyone says hit the sun bathing spots in parks, but around here, people don't seem to sunbathe a lot in the parks. Or I just never see it.

I saw 1 woman sunbathing in the park near my work 1 time, and found tungsten close by when I came back the next day at lunch.

Typically, where in the parks where you're at, do you see people sunbathing?

Sigma, delta, lambda or omega

Or bullseye

Spoke too soon, thanks for the reply. 

Just got my first tiny woman ring 10k white gold, rang up a scratchy 2-5 one way, and solid 5 the other way.

Just out of curiosity, because I haven't found a thin woman ring like that with the nox, what did it ring up ad? Was it a solid vdi?

Hey everyone, getting excited to go try my first water hunt locally. Would the above hold true for fresh water lake hunting? Shore to around chest deep?

On 3/26/2021 at 9:04 AM, kac said:

Cool!

You sure the King pendant isn't yours? 🙂

Lol, I sure found it ironic. That and the four leaf clover pendant I found on saint patrick day

On 3/26/2021 at 8:11 AM, mn90403 said:

Well done.  My last 10k gold ring was an FG!

Thanks! I had to look them up, at first I thought it meant gold filled. Lol never heard of the guy till now

On 3/26/2021 at 7:03 AM, okara gold said:

Nice finds. Sure was worth stopping there again! I'd make that spot a weekly hunt.

Thanks! Already went back the next day and started gridding the same area.

Yeah, the only thing Im discriminating now is 1 and bellow. I know there's micro gold there, but otherwise I spend all my time digging balls of hershey kiss foil.

I'll have to double check my settings. Some pull tabs sound weak in one direction, but my gold tester ring still sounds really good. 

Also, in all metal mode the pull tabs go back to sounding like the gold ring.

As for bottle caps, I've been finding some that ring up 10-11, but like someone here mentioned, switching to 5khz makes them hit at 32 or so

The reason I ask is I just got an eqx 800 a month ago, and was fiddling with a couple settings. After I was messing with one of the iron bias settings, I noticed some pull tabs give a weak one way signal. 

Hey everyone. I've been detecting for a while now, but have for the most part stayed close to home. I noticed some posters call all beer caps crown caps, and some refer to square pull tabs. 

All that trash looks the same in my neck of the woods. Is there a primer on the difference between them?

Ah, was worried that was the case. I love the pulsedive, and know it will come in handy if I ever make it to a real beach.