-
Posts
1,162 -
Joined
-
Last visited
-
Days Won
20
Content Type
Forums
Detector Prospector Magazine
Detector Database
Downloads
Posts posted by Joe Beechnut OBN
-
-
On 5/2/2021 at 7:23 AM, schoolofhardNox said:
Great finds. Always nice to see old gun parts. Silver seems to hide well sometimes. Interested to know if you were going rather slow and did you ever try digging very iffy, repeatable signals. Sometimes the deep stuff does not come in as a solid hit and a lot of times if it's on the fringe of what the machines can do, it may read as iron. I would dig any tight, small signal for a while and see what turns up. The ground conditions there may limit you to 8" for solid sounding signals.
I agree on all, Kool targets and spot! Looks like a lot of history...
And I Love what Schoolofhardnoxs said on the deep stuff. Digging one ways, iffy faints and targets that null or jumping ID can be prime targets. ..
On 5/1/2021 at 9:14 PM, F350Platinum said:Even the old V8 engine block was out of the water today.
I love sunken markers, Gives me a gauge on where I am at and the water level.
Tides were low up in the northern part of the Bay also, so we must not be to far a part, Since I am not hunting yet someone send me a "Look what you missed picture"
Low here was 3pm..Neg 1 foot.
-
2
-
1
-
-
5 hours ago, GB_Amateur said:
Thank you..... Learn something new everyday. I though there was a small amount of silver in them.😬
Here are a few Old nickel rings. (Not marked) Then another I am not sure, it is marked Nickel / Silver.
Just looked up, the single ring is German Silver..
Nickel Silver vs. German Silver
The terms “nickel silver” and “German silver” actually refer to the same substance, but items made of this metal are not really silver at all. Nickel or German “silver” is a white alloy containing copper, zinc, and nickel. While it is silvery in color, it contains none of the more valuable metal.
This type of metal was developed in Germany in the late 1800s as a less expensive substitute for silver.
-
2
-
1
-
-
Love the red stone ring!
I've found several nickel rings but they have that clean look but nickel colored. I have one I found that is marked Nickel / Silver. (which is German Silver) When I found it I though gold but for some reason it looked different. Very clean but just not the right look. See if I can find the picture...
You should be able to tell the difference if you scratch it on the testing stone.
Gold is soft, NIckel will be hard...Nickel/Silver.. I'm not sure.
-
2
-
-
Pins are no different on the old Minelab sovereign and Excalibur shafts (set low). I've broke a few of them over a 12 year period but never a Whites. I broke them because of me leaning on them when digging which will cause stress cracks then a eventual fail. Where is my Buddy Dew, that's his number one thing to break.
-
5
-
-
Sorry to hear Skulldiver, I lost a Excalibur about 4 years ago to the saltwater. Could not get home in time to save her. You get to where you have a relationship with these machines when they continue to work there magic. Gone, but not forgotten....🏴☠️
-
1
-
1
-
-
Congrads on the new coil!
When they first sent me one to test last fall they sent it with out the lower rod also. I was a little puzzled at first....I notified them of the problem and they were very fast in getting one out to me.. Mistakes happen..... More then once looks like.
Having the 8 inch coil and not being able to use it right away ..... I grabbed one of my Xtra Excalibur lower shafts and took off about 1/32th of a inch on each side. Fit perfect...
Enjoy that 8 inch.. And keep us informed on how it works.
-
8
-
-
15 hours ago, Tony said:
I’m hoping that amount was due to COVID and no regular USPS service was available due to very limited flights 😬
Normally I use USPS but they had stopped all deliveries to some countries during that time.... the endcaps would have cost about 35 dollars...to the land downunder.
I remember one time I shipped GG head phones over night to Shizuoka Prefecture Japan .....someone in great need ..it was FEDX 285.oo. And it ended up being 2 day shipping time. He did getting several Plat...and killer golds.
Him to me..
Still keeping up with you on the ring count, just.Good to have some friendly competition brother.-
6
-
-
10 hours ago, dewcon4414 said:
Im really not seeing the big deal. Testing is done as are improvements for the Limited..... if someone has the xtra chance to buy one including shipping and Fisher has met the obligation with Rick and still has some why not pass them on at this point? Seem like a good gesture since the production model is going to be pricy to them. ALSO.... what if they find issues that we didnt have?
I'm not sure why but I can tell you once you start shipping over seas and specially Downunder, Australia... if something goes wrong with the detector it cost a fortune to ship. Fisher is very good at paying shipping both ways on warranty issues......I've shipped stuff to Australia before, detectors, parts and the shipping is insane. Example ... 150 USD dollars to ship two endcap...Then add in import duties. To much risk and cost.
Once they get service setup in Euro and other places I can see service being easier to the other side of the world.. All of this is me guessing also.
-
5
-
1
-
-
On 3/24/2021 at 6:25 PM, PimentoUK said:
This impartial, honest, battery test website is well worth a look:
https://lygte-info.dk/review/batteries2012/Common18650IndividualTest UK.html
That's a Great site, have almost every 18650 I've ever seen.. And Great details on each.
-
2
-
-
-
Nice time out on the treasure ark! Flat bottom you can get up in the shallow's.
Kool Baltimore bottles also, I've heard of those names before, long gone but not to far from me.
-
4 minutes ago, pjrough said:
The machine to have would be the TDI Pro in that box...SEA GHOST has really done some nice mods over the last 2 years.
-
1
-
-
Love them specially the magenta stones! WOW! Go "AQ"!
-
1
-
-
7 hours ago, Valens Legacy said:
Looks like a nice set-up and i will have to try it myself for sure. I can use a good system like that to prepare for a good hunt.
Since I don't live near your beach can you please send me some of the sand and water.
Lots of old swim spots on the rivers in Illinois from what I hear. I'm not sure if your near Tom Hiluxyota but I really enjoy his river hunt video's.
-
1
-
-
Very nice setup and it is in your back yard...👍...You can really learn a lot about a detector doing testing and playing with the settings in a test garden ...... Good Luck!
I've had a swing arm (air) test bed for many years. Although not as nice as yours I've learned so much about my machines and target responses. My favorite testing has been head phones and how to get the most out of them, audio wise.
-
6
-
1
-
-
3 hours ago, ALEXANDRE TARTAR said:
Headphone, the most powerful on the market on IMPULSE AQ audio frequencies
Best production headphones I've ever used....., So much I recommended to Fisher they sell them as aftermarket headphones.. they are that good. Blows away every aftermarket and private set made for use at the beach and diving.
Thank You Alexandre !! And for the details above...On the New World Version Impulse "AQ"
-
7
-
-
21 hours ago, stateguy said:
what number are they up too
iwas supposedly on the list like 50ish
i have not herd a thing
my friend was 26 I believe and brought it from Rick a while back and he also received a email not long ago from FT asking if he interested in buying a machine
i also see some people where able to buy two machine (weather that’s what they ordered or it’s politics)
are they going to give everyone an opportunity to buy one that put there name on a list. They should
The door is open as far as I know for the Limited version, I would contact them ASAP. I know of three who ordered/purchased last week.
Arturo Barrientos.................... service-fisherlab@fisherlab.com
We have more of the Fisher Impulse now available. If interested to purchase please let me know. The pricing is below.
- IMPULSE-AQ-NIMH $1,499
- PI-BATPK-NIMH $199.00 *Only if you want more than 1 battery pack
- 8COILPI-AQ-PK $299
Regards,
ARTURO BARRIENTOS
Sales Support
First Texas Products
1120 Alza Drive, El Paso TX 79907 USA | t 915.633.8354 ext. 1002 | c 915.248.6609 | f 915.633.8529 |WhatsApp 915.248.6609
-
2
-
On 4/7/2021 at 6:00 PM, Skullgolddiver said:
current resistance with a slight performance improvement
I've tested, No performance gain due to the small amount cut off....18 inches a VLF and if I remember correct a subject over on (Findmall) Technology forum many years ago .......
Only gain I have found ....... less chance of the cable moving or exposure to the conditions, with I have tried several different things, one was running the coil cable thru the shaft.. .. and exact length needed. (both pictured)
I love going thru and reading the old Findmall post with Eric, Wire Chief, Mr Bill, Reg...etc..
The capacitance and the resistance of the coil cable has to be taken into consideration as a total value of the coil.
Depending on the exact particulars, chopping off a lot of cable would change the way the electronics looks at the coil. Adding length would affect it also.
Now in reality I have chopped fairly good sized amounts off of cables in order to permanently pole mount the electronics box. The need to get rid of excess cable length was there. I have not noticed a drop off in performance, although it could happen depending on the unit.
Mr. BillRe: Coil Cable - straight or spiralled?Frank Hamill
Date: August 19, 2002 08:43AMOne addition thing. In the other two PI's I owned in the water the currents of the ocean along with swinging against the resistance of the water cause the coil wire to move...when the coil wire would move the units would give target signals which were not there. After Terry told me about running the wire straight up it still moved in the currents. So I split malt straws and put them one by one around the straight up coil wire and taped them lightly...Falsing of that "type" stopped. A users answer to the problem. However this coil on the Goldquest SS does not need the straws as you put the connection next to the rod connection and straight up is no problem as the distance between the rod and the connection is mere nothing. On my other PI's the distance between connection and rod was several inches and allowed the movement of the coil which caused falsing. From a users standpoint who goes in the water this is a great feature that is needed to be put into coils that are used underwater.
Thank you again....FrankCoil Cable - straight or spiralled?Eric Foster
Date: August 19, 2002 04:19AMHi Frank and Larry,
Good to hear reports of the units performing well. There are always some surprises that come back from the field, though. Why running the coil wire straight up the pole rather than spiralled around, should make a difference to the field pattern has me puzzled. One of the properties of coax cable is that there is no external field generated by the cable. Does winding the cable clockwise give a different result to it being anti-clockwise?
How is this change in field pattern manifested?
Do other detectors show this problem?
Eric.Re: Shorter coil cable question.Eric Foster
Date: May 10, 2005 05:34PMHi Tommy,
Shouldn't affect it at all, as the capacitance of the coil/cable circuit will be reduced.
Eric.-
4
-
1
-
-
On 4/6/2021 at 4:15 AM, Skullgolddiver said:
Please Joe...Tell me more about the Excal Dynamite battery...😉
I won't be making them for sales. Just me playing around. The Excalibur battery pictured ran for 4 days straight (106 hours) but it runs Hot, (4 18650 Samsung 3500mAh 16.8) which I am afraid might not be good on some days or machines. So Another one with 26650 batteries is planned but lower voltage. Steve sent me his extra EBL 5000mAh, so a 3 cell will be next but with the big batteries, 12.6 volts.
-
3
-
-
Smoked that hunt! Nice yellows!
-
1
-
-
Looks like a great time out! Mini tsunami, know them well in the Northern part of the Bay, I've heard down in the lower part of the bay the subs coming thru really throw a good one.
-
4
-
-
8 hours ago, dewcon4414 said:
Joe .... so what connector are you using for that NEW battery pack.... i see it has a screw on cap is why i ask? That 100 hour pack is something Fisher could have or SHOULD have done all along. Explain the audio shout off please. Im also curious as to how many of those ring you think you might have gotten with the ring slaying Xcal? I know how you are using them.... you know your sites... when and where to use them. Everyone should be watching to see if that warranty is going to be transferable especially if you intend to use it in salt water.
Audio is extremely loud on the AQ then add in my head phones (105 to 117db) So much nicer being able to edit when I swinging the scoop around or I am digging and there is some shallow targets near the coil.
-
2
-
-
4 hours ago, Carolina said:
And as Joe, I too enjoy two AQ’s in my stable. I am very satisfied with the results from both my machines. Just my (2) cents worth so to speak. I think the problem with the AQ May lie in several factors. Not everyone is cut out for PI detection. Some will learn to adapt, some won’t. Location is a key factor also. Not every detector is made for every place. The wrong detector in the wrong place can sour anyone to its liking especially if it’s new technology to them. I agree Fisher has had a rocky start to say the least but they have always treated me fairly. I also think that their quality control is lacking as every AQ comes with a test report. I’m not sure how so many issues have come to pass if the reports are correct. All and all though for me, I love my AQ’s and look forward to their use weekly. As always I wish everyone much success no matter what machine you swing and good luck everybody.
I Fully agree "Carolina"..
-
4 hours ago, Chase Goldman said:
That was also what I was saying/asking in my long winded way.
Does Joe consider the AQ to be an overall water gold game changer or is it just the weapon of choice in specific circumstances vs. the Excal or even the Equinox?
Out of the 27 golds, 7 to 9 may have been found with my Excalibur. I use the AQ and Excal about 50/50 based on location. But when I go thru a spot there is nothing and I know there is gold. The AQ gets the call, and it produces. During the same time period of the 27 AQ gold the Excalibur got 15, but at different beaches... I'm Blessed in the ability of choosing the right machine and putting myself in the right spot. The AQ has increased my chances of finding Gold ... worthy of purchasing another.
Here is the perfect example of a spot I've had guys tell me, don't bring me back here...reason, lack of targets and for that reason it was the first stop for my testing of the AQ.. Out of 4 hunts there last summer the AQ scored 2 gold rings and one gold medallion. After that I knew I was in Love..
(And my offer is still there if anyone wants to go with me this coming summer to this location)
-
7
-
1
-






.jpg.014e33d6cdda985cfe75ad3dcba7dc05.jpg)


April - 9 Gold - AQ Ltd
in First Texas - Bounty Hunter, Fisher & Teknetics
Posted
GO AQ!!
Beautiful colors!!
Nice saves!!