Kaolin washer

my best guess is diabase basalt fine grainedis it magnetic ?

I like this setting it gets good depth on my silver dimes and still does good on nickles and is exelent on seperation coin fast 8.1Khz disc at 4.5 , Iron volume on 2.5 sweep speed, 9" x35 coil

it would be nice to get the guts of the Equinox in the ergonomic of the F75

I am not a headphone guy , dont like wearing them dont like the fact that i cant hear whats going on around me , but i tried out the wireless headphone on the ORX, and was amazed at how nice they are and simple and yet i can hear my suroundings and i dont get all sweaty, and the sound is great , and if you really want a cool sound keep the speeker on and the headphones it sounds like suround sound stereo sound . you hear the lows clearly , and hear i figured they may have been a cheep joke, but now that i have used them i give them a A+

took the ORX to cut nail hill , and if it didnt suprize me . it found a Old rimfire shell casing amongst the iron that the Equinox missed with the 6" coil i was using coin deep and got a nice mid tone amognst the iron and the shell came up so it really has proved itself , and i dont even know how to use it yet . the build quality is very good , yes its light , it could not get my 10" deep dime in any frequincy but it handled the 8" dime with a diggable signal no VDI the 6" dime got VDI, my dirt has some iron in it but i think i have alot to learn , but it really does do good in the nails , Kinda like it

Thanks guys for the help , somehow i missed that , Got me on that one

Just ordered a new ORX with the X 35 coil , box comes says on outside all parts inside, I open it up and everything is in but the battery and cord that goes into the lower shaft. I see batterys for sale but no one sells the cord that you have to string thrue that ataches to the battery. what to do

say i have seen no depth testing with the Apex, and field trails are on the best metal detecting sites in the world with most items ,NOT deep , I get a bit angry, when they do this , bring the detector to my field, and area, where just about nothing but cut nails , , no its gotta be tested on a colonial site in new england that is loaded and it make the machine seem like its really good just because its on a good spot . I would like to see some depth comparisons and nails tests .

its just an old brass shotgun shell , but if you knew how hammered this spot is you would be impressed to . Took the 600 and small coil out to iron hill and nver exepted it to pull another target out of this pounded spot but it did, i was using the 6" coil and had it in park 1 sweep speed 3, and 0 iron bias , all metal and you get low and high tones of the ends of the cut nails but only in one derection. wel in the mist of this mayhem i got a mid tone but was weak in one derection but becuase it seems more solid i dug it and from 6" down comes a very old brass shot shell . wich blew me away because ive hit this spot so hard its a grassy ovel about 30ft long and 25 ft wide just amazed

from 2 and up

moved it to many diffrent locations where it has always been silent still doing it changed coil still does it changed battery pack still doing it

this machine is new have used it for about a month never droped it or abused it , this is what is happeneing when i turn it on ,it starts overloading and moaning but only in the All or high position if i turn to low its a quite as a mouse turn it to all and it starts moaning and will not stop , any ideas?

Fisher had picked up the mantle whites let fall , Loooks like a great machine

but is it got the depth

I see that the coil itself has a battery, in it ? question how hard is it to replace one , or is it even possible ?

found a masked musket ball , with the TDI and the folowing setting GB-3.5- pulse delay17 US conductivity switch in low gaine of 6 I got this setting off this forum and it works i had just gone over the very spot several times from several derection this past week with the Equinox and the small coil but it took the TDI to find this . up came the cut nails 1st and then still getting a high tone up comes the musket ball

Yes your ground may have alot to do with it , in my soil i found better response in multi, especially in park 1 field 1 which are low Khz weighted. but that iron rich clay could change that its nice to have the optoins

was amazed at how the TDI could get this nickle thru this iron wire

Back and front of

I have a spot of ground full of cut nails and i have been over it until nothing but nails is what you hear well i put the 6" coil on the Equinox 600 and it found a brass suspender thing , i was shocked , I have been over the spot multiple times with multiple detectors i was hunting in park1 with a gain of 22 and a sweep speed of 3 and a 0 iron bias, and after some time i got a solid 15 VDI and up comes a brass thing with an Elephant on it . All I have to say is this coil proved it is worth getting