Jump to content

Kaolin washer

Full Member
  • Posts

    299
  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Forums

Detector Prospector Home

Detector Database

Downloads

Everything posted by Kaolin washer

  1. Now I am not starting a fight hear but I own a Tarsacci, and was wondering has anyone compared the two detectors, i would like to know
  2. How is it in the black sand,using the disc, and have you compared it to the new Deus 2?
  3. I have only found one gold ring in 16 years park hunting up hear in Minnesota, would love to hunt those beaches, looks like it did good for you .
  4. i found a bunch of Gold ring s white gold , yellow gold ,small and large, from 12k to 14 k on the tarsacci i got a lot of bouncing around on the numbers in 6.5khz and almost non at 18khz most of the rings come in at 04--05-06-07-08 anyone noticed that as well ?
  5. lets hope they worked out all the bugs with some rigorous testing
  6. x35 coil coin deep 86 gain 2 sweep speed 10.5khzi was in a soccer field just looking for modern targets when up comes an 1891 Indian head penny .
  7. I have been detecting an old home site. I started out with my ORX and the x35 9" coil it found alot of targets, and then kinda went quite, so i grabbed the Tarsacci, with its 12" coal and the ground let up again , and in the one spot the east yard it to went silent, but what gagged me was i was digging down 14 inchesand doing what i call a frontabout 3ft wide and just detecting the dirt i was throwing out of the hole and using a magnet to pull out the iron and going over the dirt again but now i was using the Mackro racer with the 5" coil to do this and it was pulling out lots of non iron targets this way but what caught me off gard was when i went out side of the hole and just for the heck of it started scanning the surface the other two detectors had gone over , i started getting hits, pulling up more shotgun shells and other non iron targets , so the 5" Racer coil was doing somthing the other two could not do . it was getting in between the metal and at a good 6 " , this took me back because i figured no way it would do so well but it did and is ,
  8. I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30 so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are . 6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43, and this machine just starts devouring the ground , I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen. the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working
  9. I am in a spot i have gone over at least 5 times with the ORX, and the ground went silent. Dont think I dont like the ORX, when i go to the park and sports field you cant beat it .But like i say when i got to the site today I took some advice from a guy who said put the Disc at between 27-and 30 so i set it at 29 and i just was amazed that the ground just lit up . things at 9 inches no problem good signals and deeper . my settings used are . 6.4 khz in mix mode, gain of 7 and 0 threshold, black sand mode on and salt balance at 43, and this machine just starts devouring the ground , I spent my stimulus money on it and dont regret doing so as its made in U,S,A and it went to help an American citizen. the thing with holes in it was 18 inches deep and i left more in the hole. i was tired of digging deep holes for the day . and i forgot to say i was not digging as many nail false s. so what that guy said must be working
  10. Got back to the old homestead i have been hunting, and by far the thing i find the most of is shot gun shells, in fact i found a cash of of them buried about 9" deep , I think a red squirrel buried them must have been 15 of them , but today I went over the same spot the ORX went over and just kept finding targets, . I keep digging some nails, because i find so few good targets like silver coins i really do not know the difference from a nail false, and a silver coin so i have dug my share of rug pullers, but the Indian did have a better sound and higher numbers 14-17 and i found it by rechecking a hole the ORX found one in I am using 6.5 khz and 7 gain and 0 threshold and it will hit with a good signal in air a dime at 11 inches so its got some power . the Indian looks like someone went after it with a sharp punch of some kind, otherwise it was in extra fine condition
  11. This time i left the ORX behind, as i had hunted 6 times and found nothing with the ORX, so out came the Tarsacci, 6.5 KHZ black sand on , and salt balance on set at 43 and gain on 7 out of 10, i started going over the ground i covered with the ORX and started getting hits, up come the 1896 indian penny . the ORX is a nice machine but the Tarsacci has a great ability to find good targets in iron and mineralized ground , and its a very noticeable difference, and it came threw .the hole the penny came out of had three iron objects in it
  12. I have been hunting a spot with my ORX, and its almost time to bring out the tarsacci, it sees targets the ORX makes no sound on and deeper
  13. yes you do get somthing for the 1600.00, It can smoke those targets in bad ground
  14. What i have found out is the Tarsacci out performs my ORX in ground littered with trash, and in depth of detection, I buried a penny only 7 inches deep and the orx could not hit that penny ,du to small bits of iron and other metal in the ground , the Tarsacci pounded that penny, and i have done this test in two different spots, its noticeable very much so . and today i found a spoon at a solid 14 inches deep . but i would say my ORX is better at i,d, on iron and bottle caps also today i got a false on a 7" bread tie using the Tarsacci. but over all the TAR has power and you know it and it delivers
  15. I to have noted that i need a slower swing to get the high tone ,especially on deep targets
  16. i had the 12" coil on and used 9 khz black sand on and 5 gain, -2 threshold 41 salt balance . i did not get past a patch of grass 6x6 ft just kept hitting targets, quarters I,D at 18-20 no small foils lots of targets in the 8" range, left because of the rain
  17. cheez wizz. this thing would pull your ear off, found today on a beach spot
  18. today i was detecting on a hill side and heard a low grunt and nothing els, so i removed it , It was a Sod stake, After removing it i scanned again and about 4" away from it i got a high tone and about 3 inches down a dime came up . it was totally masked. ts one reason i remove the iron sometimes ,especially in the 1st 4 inches
  19. i was using coin fast 8.4 khz 2.5 sweep - disc of 45 and was doing good . but then came along a big event in the spot i was hunting, i figured it would have lot of new coins, Boy was i wrong. but this time i used a new program, and to my amazement the ground came alive with old targets. this is the new program using the ORX and the X-35 coal it is coin deep - 72 gain- 10.5khz- 2.5 sweep speed- and disc at 45. it just lit up the ground i had been over it loves dimes , of which i found 18 of them and it loves nickles. but for some reason the 10.5 khz likes nickles better and dimes . still digging the tabs and slaw but not much small foils , give the program a try if you like you may be amazed as well
  20. I found 3 recent drops and the rest all darkened. 7 quartes 18 dimes 6 nickles and some zincs, funny thing i had been over this spot , all i did was change the program i was using .chit""was i suprized
×
×
  • Create New...